AA 7075 Aleaciones de aluminio

Grupo de materiales: Aleaciones No Ferrosas / Aleaciones de aluminio

País/Estándar: Estados Unidos / AA

Precio indicativo:

Actualizaciones de datos

Última actualización: 2025-09

Número total de actualizaciones: 22

Historial de actualizaciones

2025-08 2025-05 2024-10 2024-04 2024-03 2024-02 2024-01 2023-12 2023-03 2022-08 2020-10 2020-09 2020-08 2020-07 2019-06 2019-05 2016-11 2016-02 2015-03 2015-01 2014-06

Este material cuenta con 2931 propiedades — aquí solo se muestra una parte.

Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.

AA 7075 Composición química

Criterios

Valor

Unidad

Número CAS

Criterios

Valor

Resto.

Unidad

Número CAS

7429-90-5

Criterios

Valor

0.18 – 0.28

Unidad

Número CAS

7440-47-3

Criterios

Valor

1.2 – 2.0

Unidad

Número CAS

7440-50-8

Criterios

Valor

val1

Unidad

Número CAS

7439-89-6

Criterios

Valor

val1

Unidad

Número CAS

7439-95-4

Criterios

Valor

val1

Unidad

Número CAS

7439-96-5

Criterios

Other each

Valor

val1

Unidad

Número CAS

Criterios

Other total

Valor

val1

Unidad

Número CAS

Criterios

Valor

val1

Unidad

Número CAS

7440-21-3

Criterios

Valor

val1

Unidad

Número CAS

7440-32-6

Criterios

Ti+Zr

Valor

val1

Unidad

Número CAS

Criterios

Valor

val1

Unidad

Número CAS

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

¿Buscas datos completos de desempeño de materiales?

AA 7075 Propiedades físicas

Temperatura

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propiedad/Valor

Módulo de elasticidad

69 — 79 GPa

Desbloquea todos los detalles

Densidad

val1 kg/dm³

Desbloquea todos los detalles

Capacidad calorífica

val1 J/(kg∙°C)

Desbloquea todos los detalles

La conductividad térmica

val1 W/(m∙°C)

Desbloquea todos los detalles

Resistencia eléctrica

val1 Ω∙mm²/m

Desbloquea todos los detalles

Conductividad Eléctrica

val1 S/m

Desbloquea todos los detalles

Temperatura de Fusión

val1 °C

Desbloquea todos los detalles

Coeficiente de Poisson

val1

Desbloquea todos los detalles

Módulo de corte

val1 GPa

Desbloquea todos los detalles

Coeficiente de Expansión Térmica (CTE)

val1 10^-6/°C

Desbloquea todos los detalles

Este material cuenta con 2931 propiedades — aquí solo se muestra una parte.

Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.

AA 7075 Tratamiento Térmico

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

The aging of aluminum alloy 7075 from any temper to the T73 or T76 temper series requires closer than normal controls on aging practice variables such as time, temperature, heating-up rates, etc., for any given item. In addition to the above, when re-aging material in the T6 temper series to the T73 or T76 temper series, the specific condition of the T6 temper material (such as its property level and other effect of processing variables) is extremely important and will affect the capability of the re-aged material to conform to the requirements specified for the applicable T73 or T76 temper series.

For sheet

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable.

Temper W: Solution heat treated at 480°C, quenched, naturally aged. With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable.

Temper T6: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

Temper T73: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 24-30 hours at 165°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T76: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used.

Temper T62: Solution heat treated at 480°C, quenched, precipitation heat treated ta 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

For plate

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable. For plate thickness over 4 inches and for rod diameters or bar thicknesses over four inches, a maximum temperature of 490°C is recommended to avoid eutectic melting.

Temper W51: Solution heat treated at 480°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W: Solution heat treated at 480°C, quenched, naturally aged.

Temper T651: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7351: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 24-30 hours at 165°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7651: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

For rolled or cold finished wire, rod and bar

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable. For plate thickness over 4 inches and for rod diameters or bar thicknesses over four inches, a maximum temperature of 490°C is recommended to avoid eutectic melting.

Temper W: Solution heat treated at 490°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W51: Solution heat treated at 490°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 490°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T651: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7351: Solution heat treated at 490°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded rod, bar and profiles

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper W510: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W511: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T76: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T6510: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T76510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T6511: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T76511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded tube

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper W510: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W511: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T6510: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T6511: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For drawn tube

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours.

For die forgings

Temper W: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged.

Temper W52: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment.

Temper T6: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C.

Temper T7352: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

For hand forgings

Temper W: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged.

Temper W52: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment.

Temper T6: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C.

Temper T652: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Temper T7352: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

For rolled rings

Temper W: Solution heat treated at 470°C, quenched, naturally aged.

Temper T6: Solution heat treated at 470°C, quenched, precipitation heat treated at 120°C for 24 hours.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove the effects of solution heat treatment and includes cooling at an uncontrolled rate to 205°C or less, followed by reheating to 230°C for 4 hours. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 7075 Propiedades mecánicas

Temperatura

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propiedad/Valor

Resistencia a la Tracción

≥ 230 MPa

Desbloquea todos los detalles

Dureza Brinell (HB)

val1

Desbloquea todos los detalles

Alargamiento, A

val1 %

Desbloquea todos los detalles

Límite elástico, Rp0.2

val1 MPa

Desbloquea todos los detalles

Energía de Impacto

val1 J

Desbloquea todos los detalles

Reducción de área

val1 %

Desbloquea todos los detalles

Dureza Vickers (HV)

val1

Desbloquea todos los detalles

¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?

Obtén información completa sobre resistencia, dureza, fatiga y más.

AA 7075 Materiales Internacionales Equivalentes

Mostrando 15 de 296 resultados.

Material

Estándar

País / Productor

Categoría de Equivalencia

Material

AlZnMgCu1,5

Estándar

DIN

País / Productor

Alemania

Categoría de Equivalencia

Oficial

Material

3.4365

Estándar

DIN

País / Productor

Alemania

Categoría de Equivalencia

Oficial

Material

A97075

Estándar

UNS

País / Productor

Estados Unidos

Categoría de Equivalencia

Oficial

Material

EN AW-7075

Estándar

País / Productor

Unión Europea

Categoría de Equivalencia

Oficial

Material

EN AW-7075

Estándar

CSN

País / Productor

República Checa

Categoría de Equivalencia

Oficial

Material

EN AW-AlZn5,5MgCu

Estándar

CSN

País / Productor

República Checa

Categoría de Equivalencia

Oficial

Material

EN AW-7075

Estándar

DIN

País / Productor

Alemania

Categoría de Equivalencia

Oficial

Material

EN AW-AlZn5,5MgCu

Estándar

DIN

País / Productor

Alemania

Categoría de Equivalencia

Oficial

Material

EN AW-AlZn5,5MgCu

Estándar

País / Productor

Unión Europea

Categoría de Equivalencia

Oficial

Material

1950

Estándar

GOST

País / Productor

Rusia

Categoría de Equivalencia

Oficial

Material

V95

Estándar

GOST

País / Productor

Rusia

Categoría de Equivalencia

Oficial

Material

AlZn5.5MgCu

Estándar

ISO

País / Productor

Internacional

Categoría de Equivalencia

Oficial

Material

7075

Estándar

ISO

País / Productor

Internacional

Categoría de Equivalencia

Oficial

Material

EN AW-7075

Estándar

MSZ

País / Productor

Hungría

Categoría de Equivalencia

Oficial

Material

EN AW-AlZn5,5MgCu

Estándar

MSZ

País / Productor

Hungría

Categoría de Equivalencia

Oficial

Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.

¿Necesita la lista completa de los 296 internacionales equivalentes?

Consulte los grados 296 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.

Optimiza la selección de materiales para tu aplicación - Reservar una demo

¿Buscas comparar materiales y tomar mejores decisiones?

Accede a datos confiables de materiales, compara opciones y decide con mayor rapidez.

Con Total Materia, puedes:

Comparar materiales basándote en datos reales de ingeniería

Encontrar materiales equivalentes entre distintas normas

Evaluar el desempeño según tus condiciones específicas

Verificar el cumplimiento con normativas internacionales

Descubre cómo funciona para tu aplicación específica

Realizar un Recorrido Guiado

296Referencias cruzadas

23Composición
1079Propiedades mecánicas
225Propiedades físicas
8Tratamiento térmico
35Metalografía
1Maquinabilidad

349Esfuerzo-Deformación
21Conformabilidad
262Fatiga
64Fractura
7Bicho raro

4Uniones
-Revestimientos
-Dimensiones
1Tribología

14Corrosión
406Envejecimiento
-Resistencia a la intemperie
2Irradiación

134Proveedores Totales