PROPRIETARY VP100 Acier pour outils
Mises à jour des données
Ce matériau a 144 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VP100 Propriétés physiques
Température
Ce matériau a 144 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VP100 Traitement thermique
- Annealing: If necessary, the proper procedure is to heat slowly and evenly to temperatures between 650 and 700°C, at a maximum rate of 100°C/h, keeping 1 hour for every 25 mm of the largest section of the piece. Slowly cool in an oven (30°C/h) to 600°C; then cool in calm air.
Stress Relief: After machining with large material removal, stress relief is recommended, heating the molds slowly and evenly (max. 100°C/h) up to about 500°C; do not exceed this temperature, due to the risk of reduced hardness. Keep 0.5 hour at temperature for every 25 mm of the largest section in the piece; regardless of the section, the time must not be less than 2 hours. After relief, cool in calm air.
Quenching: The basic procedure includes austenitization between 840 and 860°C. Cooling should be done in calm air, forced convection, or oil suitable for quenching.
Tempering: When tempered, tools should be tempered immediately, as soon as they reach 60°C. A temper is sufficient for an effective heat treatment. After soaking, the pieces should slowly cool down to room temperature. The tempering temperature must be chosen according to the desired hardness. The time of each tempering must be at least 2 hours.
Nitriding: Can be applied when higher surface hardness is required. In order not to lose hardness in the core region, the process temperature must not exceed 450°C.
PROPRIETARY VP100 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY VP100 Matériaux équivalents internationaux
Affichage de 15 sur 71 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 71 équivalents internationaux ?
Consultez les 71 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 71Références croisées
- -Composition
- 1Propriétés mécaniques
- 3Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 67Fournisseurs totaux