PROPRIETARY VP100 Acciai per utensili
Aggiornamenti dei dati
Questo materiale dispone di 144 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY VP100 Proprietà fisiche
Temperatura
Questo materiale dispone di 144 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY VP100 Trattamento Termico
- Annealing: If necessary, the proper procedure is to heat slowly and evenly to temperatures between 650 and 700°C, at a maximum rate of 100°C/h, keeping 1 hour for every 25 mm of the largest section of the piece. Slowly cool in an oven (30°C/h) to 600°C; then cool in calm air.
Stress Relief: After machining with large material removal, stress relief is recommended, heating the molds slowly and evenly (max. 100°C/h) up to about 500°C; do not exceed this temperature, due to the risk of reduced hardness. Keep 0.5 hour at temperature for every 25 mm of the largest section in the piece; regardless of the section, the time must not be less than 2 hours. After relief, cool in calm air.
Quenching: The basic procedure includes austenitization between 840 and 860°C. Cooling should be done in calm air, forced convection, or oil suitable for quenching.
Tempering: When tempered, tools should be tempered immediately, as soon as they reach 60°C. A temper is sufficient for an effective heat treatment. After soaking, the pieces should slowly cool down to room temperature. The tempering temperature must be chosen according to the desired hardness. The time of each tempering must be at least 2 hours.
Nitriding: Can be applied when higher surface hardness is required. In order not to lose hardness in the core region, the process temperature must not exceed 450°C.
PROPRIETARY VP100 Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Materiali equivalenti internazionali di PROPRIETARY VP100
Visualizzazione di 15 risultati su 71.
Le categorie di equivalenza si basano sul confronto della composizione chimica e delle proprietà meccaniche. Si raccomanda di verificare sempre l'idoneità del materiale rispetto alla specifica e all'applicazione prevista.
Hai bisogno dell'elenco completo dei 71 equivalenti internazionali?
Visualizza tutti i 71 gradi equivalenti con una mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 71Riferimenti incrociati
- -Composizione
- 1Proprietà meccaniche
- 3Proprietà fisiche
- 2Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- -Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- 67Fornitori Totali