PROPRIETARY VP100 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 144 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VP100 Propiedades físicas
Temperatura
Este material cuenta con 144 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VP100 Tratamiento Térmico
- Annealing: If necessary, the proper procedure is to heat slowly and evenly to temperatures between 650 and 700°C, at a maximum rate of 100°C/h, keeping 1 hour for every 25 mm of the largest section of the piece. Slowly cool in an oven (30°C/h) to 600°C; then cool in calm air.
Stress Relief: After machining with large material removal, stress relief is recommended, heating the molds slowly and evenly (max. 100°C/h) up to about 500°C; do not exceed this temperature, due to the risk of reduced hardness. Keep 0.5 hour at temperature for every 25 mm of the largest section in the piece; regardless of the section, the time must not be less than 2 hours. After relief, cool in calm air.
Quenching: The basic procedure includes austenitization between 840 and 860°C. Cooling should be done in calm air, forced convection, or oil suitable for quenching.
Tempering: When tempered, tools should be tempered immediately, as soon as they reach 60°C. A temper is sufficient for an effective heat treatment. After soaking, the pieces should slowly cool down to room temperature. The tempering temperature must be chosen according to the desired hardness. The time of each tempering must be at least 2 hours.
Nitriding: Can be applied when higher surface hardness is required. In order not to lose hardness in the core region, the process temperature must not exceed 450°C.
PROPRIETARY VP100 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VP100 Materiales Internacionales Equivalentes
Mostrando 15 de 71 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 71 internacionales equivalentes?
Consulte los grados 71 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 71Referencias cruzadas
- -Composición
- 1Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 67Proveedores Totales