B.S. TA 49 Titanium Alloys
Data updates
This material has 4381 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 49 Chemical Composition
BS TA 49: 1973 / Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
Looking for full material performance data?
Free registration required • Instant access
B.S. TA 49 Physical Properties
Temperature
This material has 4381 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 49 Heat Treatments
- Solution treated + precipitation treated + centreless ground or machined; & = (900 +/- 10)°C / t = 1h per 25 mm ( >= 20 min) / AC + & = (500 +/- 5)°C / t = 24h / AC
- The material and test samples shall be heat treated as follows:
1) Heat at a temperature of 900°C ± 10°C and hold for 1h per 25 mm of section, with a minimum of 20 min
2) Cool in air
3) Heat at a temperature of 500°C ± 5°C and hold for 24h
4) Cool in air
B.S. TA 49 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. TA 49 International Equivalent Materials
Showing 11 of 52 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 52 international equivalents?
See all 52 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 52Cross References
- 20Composition
- 8Mechanical Properties
- 9Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- 1Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 4283Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers