B.S. TA 50 Titanium Alloys
Data updates
This material has 4314 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 50 Chemical Composition
BS TA 50: 1973 / Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
Looking for full material performance data?
Free registration required • Instant access
B.S. TA 50 Physical Properties
Temperature
This material has 4314 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 50 Heat Treatments
- Test samples taken from the material shall be heat treated as follows:
1) Heat at a temperature of 900°C ± 10°C and hold for 1h per 25 mm of section, with a minimum of 20 min
2) Cool in air
3) Heat at a temperature of 500°C ± 5°C and hold for 24h
4) Cool in air
Stress relieving is achieved by heating the material uniformly for not more than 3h at a temperature between 600°C and 700°C.
B.S. TA 50 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. TA 50 International Equivalent Materials
Showing 7 of 8 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 8 international equivalents?
See all 8 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 8Cross References
- 9Composition
- 8Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 4283Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers