B.S. TA 45 Titanium Alloys
Data updates
This material has 4406 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 45 Chemical Composition
BS TA 45: 1973 / Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm2) (limiting ruling section 25 mm)
Looking for full material performance data?
Free registration required • Instant access
B.S. TA 45 Physical Properties
Temperature
This material has 4406 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 45 Heat Treatments
- θ = (900 ±10) °C / t = 1 h per 25 mm (>= 20 min) / AC + θ = (500 ±5) °C / t = 24 h / AC
- The material and test samples shall be heat treated as follows:
1) Heat at a temperature of 900°C ± 10°C and hold for 1h per 25 mm of section, with a minimum of 20 min
2) Cool in air
3) Heat at a temperature of 500°C ± 5°C and hold for 24h
4) Cool in air
B.S. TA 45 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. TA 45 International Equivalent Materials
Showing 15 of 54 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 54 international equivalents?
See all 54 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 54Cross References
- 20Composition
- 8Mechanical Properties
- 30Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- 1Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 4283Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 5Total Suppliers