B.S. TA 47 Titanium Alloys
Data updates
This material has 4388 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 47 Chemical Composition
BS TA 47: 1973 / Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section 100 mm)
Looking for full material performance data?
Free registration required • Instant access
B.S. TA 47 Physical Properties
Temperature
This material has 4388 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. TA 47 Heat Treatments
- Solution treated + precipitation treated: θ = (900 ±10) °C / t = 1 h per 25 mm (>= 20 min) / AC + θ = (500 ±5) °C / t = 24 h / AC
- Test samples taken from the material shall be heat treated as follows:
1) Heat at a temperature of 900°C ± 10°C and hold for 1h per 25 mm of section, with a minimum of 20 min
2) Cool in air
3) Heat at a temperature of 500°C ± 5°C and hold for 24h
4) Cool in air
Stress relieving is achieved by heating the material uniformly for not more than 3h at a temperature between 600°C and 700°C.
B.S. TA 47 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. TA 47 International Equivalent Materials
Showing 7 of 51 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 51 international equivalents?
See all 51 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 51Cross References
- 19Composition
- 16Mechanical Properties
- 10Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 4Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 4283Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers