PROPRIETARY CT PowderRange 15-5PH Stainless steels

Material group: Ferrous Alloys / Stainless steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2022-01
Total number of updates: 1
Update History

This material has 128 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY CT PowderRange 15-5PH Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.070
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
14.00 – 15.50
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
2.50 – 4.50
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
N
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7727-37-9; 17778-88-0
CRITERIA
Nb
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-03-1
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
O
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7782-44-7; 17778-80-2
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

Carpenter Additive, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY CT PowderRange 15-5PH Heat Treatments

  • Stress relieve: Heat at 677°C/minimum 2h up to 4h.
    Homogenization: Heat at 1093°C/1h, followed by an air cool to minimize anisotropy. If performing a HIP step, a separate homogenization treatment is not required.

    Solution Annealing and Ageing: Sections under 76 mm can be quenched in a suitable liquid quenchant (e.g. water or oil) and sections over 76 mm should be rapidly air cooled. It is recommended not use this Solution Annealed condition, without age hardening, for the final product due to susceptibility to stress-corrosion cracking.
    After Solution Anneal, age material, 482°C/1h, air cool.

    Hot Isostatic Press: We recommend HIP as standard practice for microstructure homogenization, removal of residual spatter-induced voids, trapped gas porosity in powder and keyhole porosity, as well as to heal any shrinkage-induced micro-cracks in the material.
    Process components under argon at not less than 100 MPa at approximately 1141°C/240 min, then cool under inert atmosphere to below 427°C.

PROPRIETARY CT PowderRange 15-5PH Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
1282 — 1455 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
12.1 — 21.7 %
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
val1
Full data available with free access View Complete Material Data
J
Unlock full details
Full data available with free access View Complete Material Data
Reduction of Area
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
945 — 1310 MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

PROPRIETARY CT PowderRange 15-5PH International Equivalent Materials

Showing 15 of 45 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
SA-564 XM-12
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SA-693 Type XM-12
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SA-705 Type XM-12
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A747 CB7Cu-2
STANDARD
ACI
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 693 S15500
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 564 XM-12
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 693 Type XM-12
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 705 XM-12
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
5826
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 959 Type XM-12
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
CarTech 15Cr-5Ni Stainless
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
BÖHLER N701
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
ATI 15-5
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
VIRGO 15.5 PH
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
15-5 PH
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 45 international equivalents?

See all 45 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 45Cross References
  • 13Composition
  • 36Mechanical Properties
  • -Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 33Total Suppliers