PROPRIETARY X15U5W Stainless steels
Data updates
This material has 229 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY X15U5W Chemical Composition
Aubert & Duval, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY X15U5W Physical Properties
Temperature
This material has 229 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY X15U5W Heat Treatments
- Aged I: Harden for 4 hrs at 550°C followed by air cooling.
Aged II: Harden for 4 hrs at 620°C followed by air cooling.
Delivered condition: We supply this steel either in the “solution treated” or the “solution treated and aged” condition, in most cases 550°C/ 4hrs for UTS = 1070 MPa.
Aging: After solution treatment this steel must undergo precipitation hardening (or “aging”) in order to achieve its mechanical properties.
The two most common aging treatments are: 4 hours at 550°C for UTS: 1120 MPa; 4 hours at 620°C for UTS: 950 MPa.
Other strength levels can be achieved; the highest level corresponds to aging for 1 hr at 480°C for UTS: 1350 MPa approx.
PROPRIETARY X15U5W Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY X15U5W International Equivalent Materials
Showing 15 of 108 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 108 international equivalents?
See all 108 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 108Cross References
- 5Composition
- 8Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 93Total Suppliers