PROPRIETARY Micro-Melt 23 Alloy Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2022-02
Total number of updates: 1
Update History

This material has 22 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt 23 Alloy Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
1.30
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
4.20
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2
CRITERIA
W
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-33-7

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt 23 Alloy Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.72 — 8.17 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 22 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt 23 Alloy Heat Treatments

  • Annealing: heat slowly to 849/899°C (1560/1650°F), hold until the entire mass is heated through, and cool slowly (do not exceed 11°C [20°F] per hour) in the furnace to about 699°C (1290°F), after which the cooling rate may be increased. The annealed hardness should be maximum BHN 260 (HRC 26).
    Hardening: preheat at 449/499°C (840°F/930°F), transfer to a second preheat at 849/899°C (1560/1650°F). Austenitize at 1093/1190°C (2000/2175°F), depending upon final hardness/toughness combination desired. When hardening in vacuum, the austenitizing temperature should be raised approximately 11/14°C (20/25°F) above that used for a salt bath. For oil quenching, an interrupted quench is recommended. Parts should be oil quenched to approximately 538°C (1000°F), removed from the bath, and air cooled. Similarly, parts may be quenched into a salt bath held at 538°C (1000°F), equalized, and air cooled. Vacuum furnaces with positive pressure quench capability can also be used. Parts should be allowed to cool to below 66°C (150°F) prior to tempering.
    Stress Relieving: to relieve the stresses of machining, heat slowly to 599/699°C (1110/1290°F), hold 2 hours, furnace cool to about 500°C (930°F), then cool in still air. Tempering: the tempering temperature may be varied according to the desired hardness, but is usually in the range 538/579°C (1000/1075°F).

Optimize material selection for your application - Book A Demo

  • 2Cross References
  • 8Composition
  • -Mechanical Properties
  • 10Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers