SAE 5718 Stainless steels
Data updates
This material has 135 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 5718 Chemical Composition
SAE AMS 5718E: 2016 / Steel, Bars, Forgings, Tubing, and Rings, Corrosion Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed
Looking for full material performance data?
Free registration required • Instant access
SAE 5718 Physical Properties
Temperature
This material has 135 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 5718 Heat Treatments
- Bars, wire, forgings, flash welded rings, extrusions, and mechanical tubing shall be annealed by heating to 690°C ± 11°C (1275°F ± 20°F), holding at heat for not less than 6 hours, and cooling in air.
After Hardening and Tempering:
Specimens taken from bars, wire, extrusions, and tubing, from forgings with axis in the longitudinal direction, and from parent metal of flash welded rings shall have the following properties after being hardened by heating to 1050°C ± 15°C (1925°F ± 25°F), holding at heat for not less than 30 minutes, and cooling as required to room temperature and tempered by heating to 650°C ± 15°C (1200°F ± 25°F), holding at heat for not less than 2 hours, and cooling in air to room temperature.
SAE 5718 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 5718 International Equivalent Materials
Showing 15 of 69 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 69 international equivalents?
See all 69 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 69Cross References
- 11Composition
- 8Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 33Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 10Total Suppliers