UNI C35 Structural and constructional steels
Data updates
This material has 1223 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNI C35 Chemical Composition
UNI 6403: 1986 / Seamless steel tubes, intended and not intended for heat treatment, for use in road vehicles and for specific purposes
Looking for full material performance data?
Free registration required • Instant access
UNI C35 Physical Properties
Temperature
This material has 1223 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNI C35 Heat Treatments
- Hardening: 840-880°C (Temperatures at the lower end of the range are generally used for water, and those at the upper end for oil quenching. Time for austenitizing as a guide: at least 30 min.);
Quenching agent: Water or oil (Other quenching agents such as synthetic quenchants may also be used.);
Tempering: 550-660°C (Time for tempering as a guide: at least 1h.);
Normalizing: 860-900°C. - Austenitizing (at least 30 min), quenching in water or oil: 840-880°C (the temperatures at the lower end of the range are generally applicable to quenching in water and those at the upper end for quenching in oil), other quenching agents such as synthetic quenchants may also be used; Tempering: 550-660°C (at least 60 min); Normalizing: 860-920°C, austenitizing (at least 30 min).
UNI C35 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNI C35 International Equivalent Materials
Showing 15 of 425 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 425 international equivalents?
See all 425 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 425Cross References
- 92Composition
- 210Mechanical Properties
- 21Physical Properties
- 7Heat Treatment
- 6Metallography
- -Machinability
- 95Stress-Strain
- 45Formability
- 12Fatigue
- -Fracture
- -Creep
- 9Joints
- -Coatings
- 6Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 295Total Suppliers