DIN X20Cr13 Stainless steels
Data updates
This material has 1808 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN X20Cr13 Chemical Composition
EN 10088-1: 2023 / Stainless steels - Part 1: List of stainless steels
Looking for full material performance data?
Free registration required • Instant access
DIN X20Cr13 Physical Properties
Temperature
This material has 1808 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN X20Cr13 Heat Treatments
- Hot formed at 1100-800°C, slow cooled.
A: annealed at 750-850°C.
QT700: quenched at 950-1050°C, oil or air cooled. Tempered at 650-750°C.
QT800: quenched at 950-1050°C, oil or air cooled. Tempered at 600-700°C. - Hot forming: 1100-800°C, slow cooling; Annealing (+A): 745-825°C, air cooling; Quenching (+QT700): 950-1050°C, oil or air cooling; (If heat treatment is carried out in a continuous furnace, the upper part of the range specified should usually be preferred, or even exceeded); Tempering: 650-750°C; Quenching (+QT800): 950-1050°C, oil or air cooling; (If heat treatment is carried out in a continuous furnace, the upper part of the range specified should usually be preferred, or even exceeded); Tempering: 600-700°C.
DIN X20Cr13 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN X20Cr13 International Equivalent Materials
Showing 15 of 833 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 833 international equivalents?
See all 833 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 833Cross References
- 60Composition
- 270Mechanical Properties
- 102Physical Properties
- 12Heat Treatment
- 6Metallography
- 1Machinability
- 51Stress-Strain
- 12Formability
- 12Fatigue
- -Fracture
- -Creep
- 6Joints
- -Coatings
- 4Dimensions
- -Tribology
- 1Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 438Total Suppliers