PROPRIETARY VHSUPER Acciai per utensili
Aggiornamenti dei dati
Questo materiale dispone di 78 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY VHSUPER Composizione chimica
Villares Metals, Product Data Sheets,
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY VHSUPER Proprietà fisiche
Temperatura
Questo materiale dispone di 78 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY VHSUPER Trattamento Termico
- Recommendations to improve tool life: Slowly preheat between 200 and 300°C before starting operation. Carry out periodic stress relief throughout the tool life.
Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heat for quenching should be between 1010 and 1030°C. It is recommended to pre-warm the tools.
Cool in:
a) Appropriate oil with agitation and heated between 40 and 70°C.
b) Salt bath kept between 500 and 550°C.
Can be tempered in a vacuum oven.
Tempering: The tools must be tempered immediately after tempering, as soon as they reach 60°C. Do at least 2 tempers and between each temper the parts must cool slowly to room temperature. Tempering temperatures 550 and 650°C, depending on the desired hardness. The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension. Allow 1 hour for each mm of thickness.
Nitriding: It must be carried out after quenching and tempering, as long as the nitriding temperature is at least 50°C lower than the temperature of the last tempering.
PROPRIETARY VHSUPER Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Materiali equivalenti internazionali di PROPRIETARY VHSUPER
Visualizzazione di 12 risultati su 52.
Le categorie di equivalenza si basano sul confronto della composizione chimica e delle proprietà meccaniche. Si raccomanda di verificare sempre l'idoneità del materiale rispetto alla specifica e all'applicazione prevista.
Hai bisogno dell'elenco completo dei 52 equivalenti internazionali?
Visualizza tutti i 52 gradi equivalenti con una mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 52Riferimenti incrociati
- 5Composizione
- 1Proprietà meccaniche
- 4Proprietà fisiche
- 2Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- -Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- 14Fornitori Totali