PROPRIETARY VHSUPER Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 78 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VHSUPER Composición química
Villares Metals, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VHSUPER Propiedades físicas
Temperatura
Este material cuenta con 78 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VHSUPER Tratamiento Térmico
- Recommendations to improve tool life: Slowly preheat between 200 and 300°C before starting operation. Carry out periodic stress relief throughout the tool life.
Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heat for quenching should be between 1010 and 1030°C. It is recommended to pre-warm the tools.
Cool in:
a) Appropriate oil with agitation and heated between 40 and 70°C.
b) Salt bath kept between 500 and 550°C.
Can be tempered in a vacuum oven.
Tempering: The tools must be tempered immediately after tempering, as soon as they reach 60°C. Do at least 2 tempers and between each temper the parts must cool slowly to room temperature. Tempering temperatures 550 and 650°C, depending on the desired hardness. The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension. Allow 1 hour for each mm of thickness.
Nitriding: It must be carried out after quenching and tempering, as long as the nitriding temperature is at least 50°C lower than the temperature of the last tempering.
PROPRIETARY VHSUPER Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VHSUPER Materiales Internacionales Equivalentes
Mostrando 12 de 52 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 52 internacionales equivalentes?
Consulte los grados 52 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 52Referencias cruzadas
- 5Composición
- 1Propiedades mecánicas
- 4Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 14Proveedores Totales