SAE Ti-7Al-4Mo Alliages de titane
Mises à jour des données
Ce matériau a 4448 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
SAE Ti-7Al-4Mo Composition chimique
SAE AMS 4970M: 2020 / Alliage de titane Barres, fils et pièces forgées 7Al - 4Mo Traité thermiquement par mise en solution et précipité
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
SAE Ti-7Al-4Mo Propriétés physiques
Température
Ce matériau a 4448 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
SAE Ti-7Al-4Mo Traitement thermique
- Bars and forgings shall be annealed as follows: heat to a temperature within the range 704-788°C (1300-1450°F), hold at the selected temperature within ± 14°C (± 25°F) for a time commensurate with section thickness and the heating equipment and procedure used, and cool at a rate equivalent to an air cool or faster.
- Solution heat treatment: Heating to a temperature within the range 899 - 968°C (1650 - 1775°F), holding at the selected temperature within ± 14°C (± 25°F) for time commensurate with size and with the heating equipment and procedure used, and quenching in water and precipitation heat treated by heating to a temperature within the range 510 - 649°C (950 - 1200°F), holding at the selected temperature within ± 8°C (± 15°F) for a time commensurate with the thickness and with the heating equipment and procedure used, and cooling at a rate equivalent to air cooling.
Stress relieving: After coining, cold-sizing, or straightening product heat treated stress relieve the product at a temperature not higher than 607°C (1125°F) provided that mechanical properties are met.
SAE Ti-7Al-4Mo Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
SAE Ti-7Al-4Mo Matériaux équivalents internationaux
Affichage de 2 sur 2 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 2 équivalents internationaux ?
Consultez les 2 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 2Références croisées
- 41Composition
- 52Propriétés mécaniques
- 15Propriétés physiques
- 2Traitement thermique
- -Métallographie
- 1Usinabilité
- 13Contrainte-Déformation
- -Formabilité
- 1Fatigue
- 2Rupture
- 3Rampant
- -Assemblages
- -Revêtements
- 29Dimensions
- -Tribologie
- 4283Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 4Fournisseurs totaux