SAE Ti-7Al-4Mo Titanium Alloys
Actualizaciones de datos
Este material cuenta con 4448 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
SAE Ti-7Al-4Mo Composición química
SAE AMS 4970M: 2020 / Barras de aleación de titanio, alambre y piezas forjadas 7Al - 4Mo Térmicamente tratadas por solución y precipitación
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
SAE Ti-7Al-4Mo Propiedades físicas
Temperatura
Este material cuenta con 4448 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
SAE Ti-7Al-4Mo Tratamiento Térmico
- Bars and forgings shall be annealed as follows: heat to a temperature within the range 704-788°C (1300-1450°F), hold at the selected temperature within ± 14°C (± 25°F) for a time commensurate with section thickness and the heating equipment and procedure used, and cool at a rate equivalent to an air cool or faster.
- Solution heat treatment: Heating to a temperature within the range 899 - 968°C (1650 - 1775°F), holding at the selected temperature within ± 14°C (± 25°F) for time commensurate with size and with the heating equipment and procedure used, and quenching in water and precipitation heat treated by heating to a temperature within the range 510 - 649°C (950 - 1200°F), holding at the selected temperature within ± 8°C (± 15°F) for a time commensurate with the thickness and with the heating equipment and procedure used, and cooling at a rate equivalent to air cooling.
Stress relieving: After coining, cold-sizing, or straightening product heat treated stress relieve the product at a temperature not higher than 607°C (1125°F) provided that mechanical properties are met.
SAE Ti-7Al-4Mo Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
SAE Ti-7Al-4Mo Materiales Internacionales Equivalentes
Mostrando 2 de 2 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 2 internacionales equivalentes?
Consulte los grados 2 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 41Composición
- 52Propiedades mecánicas
- 15Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- 1Maquinabilidad
- 13Esfuerzo-Deformación
- -Conformabilidad
- 1Fatiga
- 2Fractura
- 3Bicho raro
- -Uniones
- -Revestimientos
- 29Dimensiones
- -Tribología
- 4283Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 4Proveedores Totales