PROPRIETARY Pyrowear 61 Aciers de construction
Mises à jour des données
Ce matériau a 38 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Pyrowear 61 Composition chimique
Carpenter Technology Corporation, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY Pyrowear 61 Propriétés physiques
Température
Ce matériau a 38 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Pyrowear 61 Traitement thermique
- Normalizing: Heat uniformly to 982°C (1800°F) and air cool;
Annealing: Heat uniformly to 677°C (1250°F), hold for 2 to 8 hours, and air cool;
Carburizing: Vacuum carburize at 1000°C (1830°F), followed by quenching in gas (1.5 bar nitrogen or higher) or oil medium;
Quenching: Using gas, oil or salt;
Cold treatment: A refrigeration treatment at -73°C (-100°F) or lower for 1 hour is recommended. This should be performed with minimal delay after completion of the quench.
Straightening: Operations such as shaft straightening (if required) should preferably be done after the sub zero treatment but prior to the temper. If excessive distortion exists after the solution treatment, quench, and sub-zero treatment, then it is recommended to heat the part to 200°C (392°F) in air for 1 hour, hot-straighten the part (temperature determined by amount of force required to straighten part; temperature should be maintained below 371°C (700°F) to avoid any tempering or decarburization; a small oxide layer may form at this temperature), and allow the component to air cool. The full temper cycle must then be applied.
Tempering: Temper at 482°C (900°F) for 16 hours and air cool. It is preferred that tempering be performed in vacuum but can also be performed in air.
PROPRIETARY Pyrowear 61 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY Pyrowear 61 Matériaux équivalents internationaux
Affichage de 2 résultats sur 2.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 2 équivalents internationaux ?
Consultez les 2 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 2Références croisées
- 7Composition
- 16Propriétés mécaniques
- 9Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 3Fournisseurs totaux