PROPRIETARY Pyrowear 61 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 38 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyrowear 61 Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyrowear 61 Propiedades físicas
Temperatura
Este material cuenta con 38 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyrowear 61 Tratamiento Térmico
- Normalizing: Heat uniformly to 982°C (1800°F) and air cool;
Annealing: Heat uniformly to 677°C (1250°F), hold for 2 to 8 hours, and air cool;
Carburizing: Vacuum carburize at 1000°C (1830°F), followed by quenching in gas (1.5 bar nitrogen or higher) or oil medium;
Quenching: Using gas, oil or salt;
Cold treatment: A refrigeration treatment at -73°C (-100°F) or lower for 1 hour is recommended. This should be performed with minimal delay after completion of the quench.
Straightening: Operations such as shaft straightening (if required) should preferably be done after the sub zero treatment but prior to the temper. If excessive distortion exists after the solution treatment, quench, and sub-zero treatment, then it is recommended to heat the part to 200°C (392°F) in air for 1 hour, hot-straighten the part (temperature determined by amount of force required to straighten part; temperature should be maintained below 371°C (700°F) to avoid any tempering or decarburization; a small oxide layer may form at this temperature), and allow the component to air cool. The full temper cycle must then be applied.
Tempering: Temper at 482°C (900°F) for 16 hours and air cool. It is preferred that tempering be performed in vacuum but can also be performed in air.
PROPRIETARY Pyrowear 61 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyrowear 61 Materiales equivalentes internacionales
Mostrando 2 de 2 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 2 equivalentes internacionales?
Consulte los 2 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 7Composición
- 16Propiedades mecánicas
- 9Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 3Proveedores Totales