PROPRIETARY TENAX 300IM Acier pour outils
Mises à jour des données
Ce matériau a 185 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY TENAX 300IM Composition chimique
Villares Metals, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY TENAX 300IM Propriétés physiques
Température
Ce matériau a 185 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY TENAX 300IM Traitement thermique
- Recommendations to improve tool life: Slowly preheat between 200 and 300°C before starting operation.
Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heating for quenching must be between 1010 and 1030°C, being recommended 1010°C to increase the toughness and 1030°C to increase the hot resistance. The choice of the ideal temperature must also consider design aspects and details of tool finishing. The heating cycle must provide for pre-heating parts, in accordance with the dimension of the part.Cool in:
a) Pressurized Vacuum Furnace Chamber.
b) Appropriate oil with agitation and heated between 40 and 70°C.
c) Salt bath kept between 500 and 550°C.
Tempering: Tools must be tempered immediately after tempering, as soon as they reach 60°C. Tempering temperatures 550 and 650°C, depending on the desired hardness (curve below). The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension.
Nitriding: It must be carried out after quenching and tempering, as long as the nitriding temperature is at least 50°C lower than the temperature of the last tempering.
PROPRIETARY TENAX 300IM Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY TENAX 300IM Matériaux équivalents internationaux
Affichage de 15 sur 84 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 84 équivalents internationaux ?
Consultez les 84 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 84Références croisées
- 5Composition
- 2Propriétés mécaniques
- 13Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 79Fournisseurs totaux