PROPRIETARY TENAX 300IM Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 185 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY TENAX 300IM Composición química
Villares Metals, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY TENAX 300IM Propiedades físicas
Temperatura
Este material cuenta con 185 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY TENAX 300IM Tratamiento Térmico
- Recommendations to improve tool life: Slowly preheat between 200 and 300°C before starting operation.
Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heating for quenching must be between 1010 and 1030°C, being recommended 1010°C to increase the toughness and 1030°C to increase the hot resistance. The choice of the ideal temperature must also consider design aspects and details of tool finishing. The heating cycle must provide for pre-heating parts, in accordance with the dimension of the part.Cool in:
a) Pressurized Vacuum Furnace Chamber.
b) Appropriate oil with agitation and heated between 40 and 70°C.
c) Salt bath kept between 500 and 550°C.
Tempering: Tools must be tempered immediately after tempering, as soon as they reach 60°C. Tempering temperatures 550 and 650°C, depending on the desired hardness (curve below). The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension.
Nitriding: It must be carried out after quenching and tempering, as long as the nitriding temperature is at least 50°C lower than the temperature of the last tempering.
PROPRIETARY TENAX 300IM Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY TENAX 300IM Materiales Internacionales Equivalentes
Mostrando 15 de 84 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 84 internacionales equivalentes?
Consulte los grados 84 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 84Referencias cruzadas
- 5Composición
- 2Propiedades mecánicas
- 13Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 79Proveedores Totales