PROPRIETARY TENAX 300IM Aços de ferramenta
Atualizações de dados
Este material conta com 185 propriedades — apenas uma parte está sendo exibida aqui.
Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY TENAX 300IM Composição química
Villares Metals, Product Data Sheets,
Precisa de dados completos de desempenho de materiais?
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY TENAX 300IM Propriedades físicas
Temperatura
Este material conta com 185 propriedades — apenas uma parte está sendo exibida aqui.
Desbloquear valores físicos específicos em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY TENAX 300IM Tratamento Térmico
- Recommendations to improve tool life: Slowly preheat between 200 and 300°C before starting operation.
Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heating for quenching must be between 1010 and 1030°C, being recommended 1010°C to increase the toughness and 1030°C to increase the hot resistance. The choice of the ideal temperature must also consider design aspects and details of tool finishing. The heating cycle must provide for pre-heating parts, in accordance with the dimension of the part.Cool in:
a) Pressurized Vacuum Furnace Chamber.
b) Appropriate oil with agitation and heated between 40 and 70°C.
c) Salt bath kept between 500 and 550°C.
Tempering: Tools must be tempered immediately after tempering, as soon as they reach 60°C. Tempering temperatures 550 and 650°C, depending on the desired hardness (curve below). The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension.
Nitriding: It must be carried out after quenching and tempering, as long as the nitriding temperature is at least 50°C lower than the temperature of the last tempering.
PROPRIETARY TENAX 300IM Propriedades mecânicas
Temperatura
Precisa de propriedades mecânicas completas para fazer a escolha certa?
Acesse dados detalhados de resistência, dureza, fadiga e muito mais.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY TENAX 300IM Materiais Equivalentes Internacionais
Exibindo 15 de 84 resultados.
As categorias de equivalência refletem a comparação da composição química e das propriedades mecânicas, sempre verifique a adequação do material em relação à especificação aplicável à sua aplicação.
Precisa da lista completa do 84 de equivalentes internacionais?
Veja todos as classes 84 equivalentes com mapeamento detalhado por norma, fabricante e categoria de equivalência.
Registro gratuito requerido • Acesso instantâneo
Otimizar seleção de materiais para sua aplicação - Agende uma demonstração
- 84Referências Cruzadas
- 5Composição
- 2Propriedades Mecânicas
- 13Propriedades físicas
- 2Tratamento térmico
- -Metalografia
- -Usinabilidade
- -Tensão-Deformação
- -Conformabilidade
- -Fadiga
- -Fratura
- -Rastejante
- -Junta
- -Revestimentos
- -Dimensões
- -Tribologia
- -Corrosão
- -Envelhecimento
- -Resistência às Intempéries
- -Irradiação
- 79Total de Fornecedores