PROPRIETARY CPM CRU-WEAR Acier pour outils
Mises à jour des données
Ce matériau a 47 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY CPM CRU-WEAR Composition chimique
Crucible Industries LLC., Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY CPM CRU-WEAR Propriétés physiques
Température
Ce matériau a 47 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY CPM CRU-WEAR Traitement thermique
- Annealed: Heat to 1550-1650°F (840-900°C), hold 2 hours, slow cool 50°F (28°C) per hour to 1200°F (650°C). Stress relieved: Annealed Parts: Heat to 1100-1300°F (595-705°C), hold 2 hours, then furnace cool or cool in still air. Hardened Parts: Heat to 25°F (15°C) below the original tempering temperature, hold 2 hours, then furnace cool or cool in still air. Hardened: Preheat: Heat to 1550-1600°F (840-870°C) Equalize. Austenitize: 1850-2050°F (1010-1120°C), Hold time at temperature 20-45 minutes. Quench: Air or positive pressure quench (2 bar minimum) to below 125°F (50°C). Temper: 900-1050°F (480-565°C). For the best combination of toughness and wear resistance, austenitize at 1950°F (1065°C). Temper 3 times at 1000°F (540°C).
- Annealing: Heat to 840–900°C (1550–1650°F), hold 2 hours, slow cool 25°C (50°F) per hour to 650°C (1200°F).
Stress Relieving Annealed Parts: Heat to 595–705°C (1100–1300°F), hold 2 hours, then furnace cool or cool in still air.
Hardened Parts: Heat to 15°C (25°F) below the original tempering temperature, hold 2 hours, then furnace cool or cool in still air.
Hardening: It is customary to use two furnaces: one furnace to preheat and the second furnace to austenitize. This ensures that the transition from the pre-heat temperature to the austenitizing temperature occurs fairly rapidly.
Preheat: Heat to 840–870°C (1550–1600°F), Equalize.
Austenitize: 1010–1120°C (1850–2050°F), hold time at temperature 20–45 minutes.
Quench: Air or positive pressure quench (2 bars minimum) to below 50°C (125°F). Salt bath treatment, if practical, will ensure the maximum attainable toughness for a given hardening treatment.
Temper: 480–565°C (900–1050°F). Double tempering is mandatory, and triple tempering is recommended. Cool to room temperature in between tempers. Temper 2 hours minimum each time or at least 1 hour per 25 mm of thickness for sections over 50 mm thick.
For the best combination of toughness and wear resistance, austenitize at 1065°C (1950°F). Temper 3 times at 540°C (1000°F).
PROPRIETARY CPM CRU-WEAR Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY CPM CRU-WEAR Matériaux équivalents internationaux
Affichage de 1 sur 3 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 3 équivalents internationaux ?
Consultez les 3 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 3Références croisées
- 10Composition
- 22Propriétés mécaniques
- 7Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 3Fournisseurs totaux