PROPRIETARY CPM CRU-WEAR Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 47 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM CRU-WEAR Composición química
Crucible Industries LLC., Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM CRU-WEAR Propiedades físicas
Temperatura
Este material cuenta con 47 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM CRU-WEAR Tratamiento Térmico
- Annealed: Heat to 1550-1650°F (840-900°C), hold 2 hours, slow cool 50°F (28°C) per hour to 1200°F (650°C). Stress relieved: Annealed Parts: Heat to 1100-1300°F (595-705°C), hold 2 hours, then furnace cool or cool in still air. Hardened Parts: Heat to 25°F (15°C) below the original tempering temperature, hold 2 hours, then furnace cool or cool in still air. Hardened: Preheat: Heat to 1550-1600°F (840-870°C) Equalize. Austenitize: 1850-2050°F (1010-1120°C), Hold time at temperature 20-45 minutes. Quench: Air or positive pressure quench (2 bar minimum) to below 125°F (50°C). Temper: 900-1050°F (480-565°C). For the best combination of toughness and wear resistance, austenitize at 1950°F (1065°C). Temper 3 times at 1000°F (540°C).
- Annealing: Heat to 840–900°C (1550–1650°F), hold 2 hours, slow cool 25°C (50°F) per hour to 650°C (1200°F).
Stress Relieving Annealed Parts: Heat to 595–705°C (1100–1300°F), hold 2 hours, then furnace cool or cool in still air.
Hardened Parts: Heat to 15°C (25°F) below the original tempering temperature, hold 2 hours, then furnace cool or cool in still air.
Hardening: It is customary to use two furnaces: one furnace to preheat and the second furnace to austenitize. This ensures that the transition from the pre-heat temperature to the austenitizing temperature occurs fairly rapidly.
Preheat: Heat to 840–870°C (1550–1600°F), Equalize.
Austenitize: 1010–1120°C (1850–2050°F), hold time at temperature 20–45 minutes.
Quench: Air or positive pressure quench (2 bars minimum) to below 50°C (125°F). Salt bath treatment, if practical, will ensure the maximum attainable toughness for a given hardening treatment.
Temper: 480–565°C (900–1050°F). Double tempering is mandatory, and triple tempering is recommended. Cool to room temperature in between tempers. Temper 2 hours minimum each time or at least 1 hour per 25 mm of thickness for sections over 50 mm thick.
For the best combination of toughness and wear resistance, austenitize at 1065°C (1950°F). Temper 3 times at 540°C (1000°F).
PROPRIETARY CPM CRU-WEAR Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM CRU-WEAR Materiales Internacionales Equivalentes
Mostrando 1 de 3 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 3 internacionales equivalentes?
Consulte los grados 3 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 3Referencias cruzadas
- 10Composición
- 22Propiedades mecánicas
- 7Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 3Proveedores Totales