ASTM A 841 Grade G Class 9 Aciers de construction
Mises à jour des données
Ce matériau a 83 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
ASTM A 841 Grade G Class 9 Composition chimique
A841/A841M: 2017 / Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
ASTM A 841 Grade G Class 9 Propriétés physiques
Température
Ce matériau a 83 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
ASTM A 841 Grade G Class 9 Traitement thermique
- Plates may be formed at temperatures not exceeding 530°C (985°F). Except for the TMR-I-T process, the plates shall be cooled directly after rolling without being allowed to cool below 550°C (1025°F).Quenching hardening shall be initiated from a temperature within the range from 550°C to 810°C (1025°F to 1490°F). Subsequent to quenching, the plates shall be tempered within the range from 555°C to 625°C (1030°F to 1155°F), holding at that temperature for a minimum of 1.2 min ⁄mm of thickness but for not less than 15 min, and then cooling at a rate of not less than 165°C ⁄h (300°F ⁄h), either in air or by quenching in water, to ambient temperature. Prior to the tempering treatment, the plates may be subjected to an intermediate heat treatment consisting of heating to a temperature in the range from 640°C to 710°C (1185°F to 1310°F), holding at that temperature for a minimum of 2.4 min ⁄mm of thickness, but in no case less than 15 min, and then water-quenching to below 150°C (300°F) in the case of plate thicknesses of more
ASTM A 841 Grade G Class 9 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
ASTM A 841 Grade G Class 9 Matériaux équivalents internationaux
Affichage de 2 sur 3 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 3 équivalents internationaux ?
Consultez les 3 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 3Références croisées
- 10Composition
- 8Propriétés mécaniques
- 3Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- 24Assemblages
- -Revêtements
- 34Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- -Fournisseurs totaux