ASTM A 841 Grade G Class 9 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 83 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 841 Grade G Class 9 Composición química
A841/A841M: 2017 / Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASTM A 841 Grade G Class 9 Propiedades físicas
Temperatura
Este material cuenta con 83 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 841 Grade G Class 9 Tratamiento Térmico
- Plates may be formed at temperatures not exceeding 530°C (985°F). Except for the TMR-I-T process, the plates shall be cooled directly after rolling without being allowed to cool below 550°C (1025°F).Quenching hardening shall be initiated from a temperature within the range from 550°C to 810°C (1025°F to 1490°F). Subsequent to quenching, the plates shall be tempered within the range from 555°C to 625°C (1030°F to 1155°F), holding at that temperature for a minimum of 1.2 min ⁄mm of thickness but for not less than 15 min, and then cooling at a rate of not less than 165°C ⁄h (300°F ⁄h), either in air or by quenching in water, to ambient temperature. Prior to the tempering treatment, the plates may be subjected to an intermediate heat treatment consisting of heating to a temperature in the range from 640°C to 710°C (1185°F to 1310°F), holding at that temperature for a minimum of 2.4 min ⁄mm of thickness, but in no case less than 15 min, and then water-quenching to below 150°C (300°F) in the case of plate thicknesses of more
ASTM A 841 Grade G Class 9 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASTM A 841 Grade G Class 9 Materiales Internacionales Equivalentes
Mostrando 2 de 3 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 3 internacionales equivalentes?
Consulte los grados 3 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 3Referencias cruzadas
- 10Composición
- 8Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- 24Uniones
- -Revestimientos
- 34Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales