PROPRIETARY Uddeholm Stavax ESR Aciers inoxydables
Mises à jour des données
Ce matériau a 36 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Stavax ESR Composition chimique
Uddeholms AB, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Stavax ESR Propriétés physiques
Température
Ce matériau a 36 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Stavax ESR Traitement thermique
- Soft annealing: Protect the steel and heat through to 890°C (1630°F). Then cool in the furnace at 20°C (36°F) per hour to 850°C (1560°F), then at 10°C (18°F) per hour to 700°C (1290°F), then freely in air;
Stress-relieving: After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hr. Cool slowly to 500°C (930°F), then freely in air;
Hardening: Preheating temperature: 600-850°C (1110-1560°F). Austenitizing temperature: 1000-1050°C (1830-1920°F), but usually 1020-1030°C (1870-1885°F).
Quenching media: Fluidized bed or salt bath at 250-550°C (480-1020°F), then cool in air blast, Vacuum with sufficient positive pressure, High speed gas/circulating atmosphere. In order to obtain optimum properties, the cooling rate should be as fast as is concomitant with acceptable distortion. When heat treating in a vacuum furnace, a 4-5 bar overpressure is recommended. Temper immediately when the tool reaches 50-70°C (120-160°F);
Tempering: Choose the tempering temperature according to the hardness. Temper twice with intermediate cooling to room temperature. Lowest tempering temperature 250°C (480°F), holding for minimum of 2 h. - Austenitizing temperature 1030°C (1890°F). Holding time 30 minutes.
PROPRIETARY Uddeholm Stavax ESR Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Stavax ESR Matériaux équivalents internationaux
Affichage de 1 sur 3 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 3 équivalents internationaux ?
Consultez les 3 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 3Références croisées
- 5Composition
- 7Propriétés mécaniques
- 15Propriétés physiques
- 3Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- 1Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 2Fournisseurs totaux