PROPRIETARY Uddeholm Stavax ESR 不锈钢
材料组别:
黑色金属 / 不锈钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2016-05
更新总数: 1
更新历史
PROPRIETARY Uddeholm Stavax ESR 化学成分
化学元素
数值
单位
CAS 编号
Uddeholms AB, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Uddeholm Stavax ESR 物理性能
温度
PROPRIETARY Uddeholm Stavax ESR 热处理
- Soft annealing: Protect the steel and heat through to 890°C (1630°F). Then cool in the furnace at 20°C (36°F) per hour to 850°C (1560°F), then at 10°C (18°F) per hour to 700°C (1290°F), then freely in air;
Stress-relieving: After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hr. Cool slowly to 500°C (930°F), then freely in air;
Hardening: Preheating temperature: 600-850°C (1110-1560°F). Austenitizing temperature: 1000-1050°C (1830-1920°F), but usually 1020-1030°C (1870-1885°F).
Quenching media: Fluidized bed or salt bath at 250-550°C (480-1020°F), then cool in air blast, Vacuum with sufficient positive pressure, High speed gas/circulating atmosphere. In order to obtain optimum properties, the cooling rate should be as fast as is concomitant with acceptable distortion. When heat treating in a vacuum furnace, a 4-5 bar overpressure is recommended. Temper immediately when the tool reaches 50-70°C (120-160°F);
Tempering: Choose the tempering temperature according to the hardness. Temper twice with intermediate cooling to room temperature. Lowest tempering temperature 250°C (480°F), holding for minimum of 2 h. - Austenitizing temperature 1030°C (1890°F). Holding time 30 minutes.
PROPRIETARY Uddeholm Stavax ESR 机械性能
PROPRIETARY Uddeholm Stavax ESR 的全球近似对照材料
显示 1 条结果，共计 3 条。
材料牌号
标准
国家与地区 / 生产商
近似类型
近似对照材料反映了不同材料间化学成分的相似性和力学性能的相似性——请务必根据具体应用场景的适用标准和条件具体核实材料的适用性。
根据您的应用场景优化材料选择 - 预约演示
- 3交叉引用
- 5化学成分
- 7机械性能
- 15物理性能
- 3热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- 1焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 2供应商总数