PROPRIETARY AerMet 100 Alloy Acier pour outils
Mises à jour des données
Ce matériau a 58 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY AerMet 100 Alloy Composition chimique
Carpenter Technology Corporation, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY AerMet 100 Alloy Propriétés physiques
Température
Ce matériau a 58 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY AerMet 100 Alloy Traitement thermique
- Normalizing: heating to 899°C (1650°F) holding for one hour and air cooling to room temperature. Optimum softening for machining is obtained by following the 899°C (1650°F) normalize with a 16h 677°C (1250°F) overage anneal.
Annealing: softened by using a 677°C (1250°F) overage anneal for 16h. The optimum annealed hardness of 40 HRC maximum is obtained following this anneal.
Solution treatment: at a range 885°C ±14°C (1625°F ±25°F) for 1h.
Quenching: water quenching is not recommended; cooled from the solution treatment temperature to 66°C (150°F) in 1 to 2h to develop optimum properties. Individual sections larger than 50.8mm diameter or 25.4mm thick (plate) must be quenched with oil in order to obtain 66°C (150°F) in 1 to 2h. Individual sections up to 50.8mm diameter or 25.4mm thick (plate) will air cool to 66°C (150°F) in 1 to 2h. The cooling rate of the furnace load must be monitored by a thermocouple attached to the hottest spot in the load to ensure that the 2h cool to 66°C (150°F) is obtained.
Cold treatment: cooled to -73°C (-100°F) and held for 1 hour.
Straightening: a low temperature stress relief at 177/204°C (350/400°F) for 5 hours following the refrigeration operation will provide an optimal combination of ductility and yield strength.
Aging: at 482°C ±6°C (900°F ±10°F) for 5 hours; parts should never be aged at a temperature below 468°C (875°F).
PROPRIETARY AerMet 100 Alloy Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY AerMet 100 Alloy Matériaux équivalents internationaux
Affichage de 3 sur 3 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 3 équivalents internationaux ?
Consultez les 3 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 3Références croisées
- 6Composition
- 10Propriétés mécaniques
- 25Propriétés physiques
- 1Traitement thermique
- 3Métallographie
- -Usinabilité
- 2Contrainte-Déformation
- -Formabilité
- 3Fatigue
- 2Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 3Fournisseurs totaux