PROPRIETARY AerMet 100 Alloy Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 58 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY AerMet 100 Alloy Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY AerMet 100 Alloy Propiedades físicas
Temperatura
Este material cuenta con 58 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY AerMet 100 Alloy Tratamiento Térmico
- Normalizing: heating to 899°C (1650°F) holding for one hour and air cooling to room temperature. Optimum softening for machining is obtained by following the 899°C (1650°F) normalize with a 16h 677°C (1250°F) overage anneal.
Annealing: softened by using a 677°C (1250°F) overage anneal for 16h. The optimum annealed hardness of 40 HRC maximum is obtained following this anneal.
Solution treatment: at a range 885°C ±14°C (1625°F ±25°F) for 1h.
Quenching: water quenching is not recommended; cooled from the solution treatment temperature to 66°C (150°F) in 1 to 2h to develop optimum properties. Individual sections larger than 50.8mm diameter or 25.4mm thick (plate) must be quenched with oil in order to obtain 66°C (150°F) in 1 to 2h. Individual sections up to 50.8mm diameter or 25.4mm thick (plate) will air cool to 66°C (150°F) in 1 to 2h. The cooling rate of the furnace load must be monitored by a thermocouple attached to the hottest spot in the load to ensure that the 2h cool to 66°C (150°F) is obtained.
Cold treatment: cooled to -73°C (-100°F) and held for 1 hour.
Straightening: a low temperature stress relief at 177/204°C (350/400°F) for 5 hours following the refrigeration operation will provide an optimal combination of ductility and yield strength.
Aging: at 482°C ±6°C (900°F ±10°F) for 5 hours; parts should never be aged at a temperature below 468°C (875°F).
PROPRIETARY AerMet 100 Alloy Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY AerMet 100 Alloy Materiales Internacionales Equivalentes
Mostrando 3 de 3 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 3 internacionales equivalentes?
Consulte los grados 3 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 3Referencias cruzadas
- 6Composición
- 10Propiedades mecánicas
- 25Propiedades físicas
- 1Tratamiento térmico
- 3Metalografía
- -Maquinabilidad
- 2Esfuerzo-Deformación
- -Conformabilidad
- 3Fatiga
- 2Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 3Proveedores Totales