PROPRIETARY Uddeholm Formvar Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 32 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Formvar Composición química
Uddeholms AB, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Formvar Propiedades físicas
Temperatura
Este material cuenta con 32 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Formvar Tratamiento Térmico
- Soft annealing: Protect the steel and heat through to 850°C (1560°F). Then cool in furnace at 10°C (20°F) per hour to 600°C (1110°F), then freely in air;
Stress relieving: After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hr. Cool slowly to 500°C (930°F), then freely in air;
Hardening: Preheating temperature: 600-900°C (1110-1650°F). Normally a minimum of two preheats, the first in the 600-650°C (1110-1200°F) range, and the second in the 820-850°C (1510-1560°F) range. When three preheats are used the second is carried out at 820°C (1510°F) and the third at 900°C (1650°F). Austenitizing temperature: 1000-1030°C (1830-1890°F);
Quenching: Recommended quenching media: High speed gas/circulating atmosphere, Vacuum (high speed gas with sufficient positive pressure). An interrupted quench at 320-450°C (610-840°F) is recommended where distortion control and quench cracking are a concern, Martempering bath, salt bath or fluidized bed at 450-550°C (840-1020°F), Martempering bath, salt bath or fluidized bed at 180-200°C (360-390°F), Warm oil, approx. 80°C (180°F). Temper the tool as soon as its temperature reaches 50-70°C (120-160°F);
Tempering: Temper minimum twice for forging and extrusion tools with intermediate cooling to room temperature. Holding time at temperature minimum 2 hr. Tempering in the range of 500-550°C (930-1020°F) for the intended final hardness will result in a lower toughness.
Gas nitriding at 510°C (950°F) for 10 h and depth of case 0.16 mm or 30 h and depth of case 0.22 mm. Plasma nitriding at 480°C (895°F) for 10 h and depth of case 0.15 mm. Nitrocarburizing in gas at 580°C (1075°F) for 2 h and depth of case 0.13 mm or in salt bath at 580°C (1075°C) for 1 h and depth of case 0.08mm - Austenitizing temperature 1025°C (1875°F). Holding time 30 minutes.
PROPRIETARY Uddeholm Formvar Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Formvar Materiales Internacionales Equivalentes
Mostrando 2 de 2 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 2 internacionales equivalentes?
Consulte los grados 2 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 6Composición
- 14Propiedades mecánicas
- 5Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 3Proveedores Totales