PROPRIETARY Uddeholm Formvar Acciai per utensili
Aggiornamenti dei dati
Questo materiale dispone di 32 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY Uddeholm Formvar Composizione chimica
Uddeholms AB, Product Data Sheets,
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY Uddeholm Formvar Proprietà fisiche
Temperatura
Questo materiale dispone di 32 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY Uddeholm Formvar Trattamento Termico
- Soft annealing: Protect the steel and heat through to 850°C (1560°F). Then cool in furnace at 10°C (20°F) per hour to 600°C (1110°F), then freely in air;
Stress relieving: After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hr. Cool slowly to 500°C (930°F), then freely in air;
Hardening: Preheating temperature: 600-900°C (1110-1650°F). Normally a minimum of two preheats, the first in the 600-650°C (1110-1200°F) range, and the second in the 820-850°C (1510-1560°F) range. When three preheats are used the second is carried out at 820°C (1510°F) and the third at 900°C (1650°F). Austenitizing temperature: 1000-1030°C (1830-1890°F);
Quenching: Recommended quenching media: High speed gas/circulating atmosphere, Vacuum (high speed gas with sufficient positive pressure). An interrupted quench at 320-450°C (610-840°F) is recommended where distortion control and quench cracking are a concern, Martempering bath, salt bath or fluidized bed at 450-550°C (840-1020°F), Martempering bath, salt bath or fluidized bed at 180-200°C (360-390°F), Warm oil, approx. 80°C (180°F). Temper the tool as soon as its temperature reaches 50-70°C (120-160°F);
Tempering: Temper minimum twice for forging and extrusion tools with intermediate cooling to room temperature. Holding time at temperature minimum 2 hr. Tempering in the range of 500-550°C (930-1020°F) for the intended final hardness will result in a lower toughness.
Gas nitriding at 510°C (950°F) for 10 h and depth of case 0.16 mm or 30 h and depth of case 0.22 mm. Plasma nitriding at 480°C (895°F) for 10 h and depth of case 0.15 mm. Nitrocarburizing in gas at 580°C (1075°F) for 2 h and depth of case 0.13 mm or in salt bath at 580°C (1075°C) for 1 h and depth of case 0.08mm - Austenitizing temperature 1025°C (1875°F). Holding time 30 minutes.
PROPRIETARY Uddeholm Formvar Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Materiali equivalenti internazionali di PROPRIETARY Uddeholm Formvar
Visualizzazione di 2 risultati su 2.
Le categorie di equivalenza si basano sul confronto della composizione chimica e delle proprietà meccaniche. Si raccomanda di verificare sempre l'idoneità del materiale rispetto alla specifica e all'applicazione prevista.
Hai bisogno dell'elenco completo dei 2 equivalenti internazionali?
Visualizza tutti i 2 gradi equivalenti con una mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 2Riferimenti incrociati
- 6Composizione
- 14Proprietà meccaniche
- 5Proprietà fisiche
- 2Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- -Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- 3Fornitori Totali