SAE Ti-6Al-4V Titanium Alloys
Material group:
Nonferrous Alloys / Titanium Alloys
Country / Standard:
United States / SAE
Data updates
Latest Update: 2026-03
Total number of updates: 5
Update History
2025-07
2025-03
2023-03
2019-11
This material has 184 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
SAE Ti-6Al-4V Chemical Composition
CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
5.50 – 6.75
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
≤ 0.08
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Fe
VALUE
≤ 0.30
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
H
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
1333-74-0
CRITERIA
N
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7727-37-9; 17778-88-0
CRITERIA
O
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7782-44-7; 17778-80-2
CRITERIA
Other each
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Ti
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
V
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2
CRITERIA
Y
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-65-5
SAE AMS 7004A: 2025 / Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate Ti-6Al-4V, Stress Relieved
Looking for full material performance data?
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
SAE Ti-6Al-4V Heat Treatments
- Stress relieved in accordance with AMS2801 in an inert, air, or vacuum atmosphere by heating to a selected set point temperature between 677 to 788°C (1250 to 1450°F). Hold at the selected temperature within ±14°C (±25°F) for a length of time commensurate with the cross-section size, followed by furnace-cool to 496°C (925°F) prior to cooling with inert gas or nitrogen to room temperature. When using a contact load sensor, the soaking time necessary to heat the center of the thickest section of the preform shall be per AMS2801. Stress relief in air is only permitted when preforms are machined all over following the stress-relief operation.
- Hot Isostatic Pressing: Process in accordance to AMS4999 at not less than 14.5 ksi (100 MPa) within the range 1650 to 1750°F (899 to 954°C), hold at the selected temperature within ±25°F (±14°C) for 2 to 4 hours, and cool under inert atmosphere in the autoclave to below 800°F (427°C). Cool from 800°F (427°C) at any rate
SAE Ti-6Al-4V Mechanical Properties
Temperature
Tensile Strength
≥ 848
MPa
Unlock full details
Full data available with free access
View Complete Material Data
Elongation, A
≥ 5
%
Unlock full details
Full data available with free access
View Complete Material Data
Yield Strength, Rp0.2
≥ 765
MPa
Unlock full details
Full data available with free access
View Complete Material Data
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
View Complete Material Data ›
Book A Demo
Free registration required • Instant access
Free registration required • Instant access
SAE Ti-6Al-4V International Equivalent Materials
Showing 15 of 87 results.
MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
MIL
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 87 international equivalents?
See all 87 equivalent grades with detailed mapping by standard, producer and equivalence category.
View All Equivalents ›
Book A Demo
Free registration required • Instant access
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 87Cross References
- 44Composition
- 24Mechanical Properties
- -Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 2Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 24Total Suppliers