SAE Ti-6Al-4V Alliages de titane
Mises à jour des données
Ce matériau a 184 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
SAE Ti-6Al-4V Composition chimique
SAE AMS 7004A: 2025 / Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate Ti-6Al-4V, Stress Relieved
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
SAE Ti-6Al-4V Traitement thermique
- Stress relieved in accordance with AMS2801 in an inert, air, or vacuum atmosphere by heating to a selected set point temperature between 677 to 788°C (1250 to 1450°F). Hold at the selected temperature within ±14°C (±25°F) for a length of time commensurate with the cross-section size, followed by furnace-cool to 496°C (925°F) prior to cooling with inert gas or nitrogen to room temperature. When using a contact load sensor, the soaking time necessary to heat the center of the thickest section of the preform shall be per AMS2801. Stress relief in air is only permitted when preforms are machined all over following the stress-relief operation.
- Hot Isostatic Pressing: Process in accordance to AMS4999 at not less than 14.5 ksi (100 MPa) within the range 1650 to 1750°F (899 to 954°C), hold at the selected temperature within ±25°F (±14°C) for 2 to 4 hours, and cool under inert atmosphere in the autoclave to below 800°F (427°C). Cool from 800°F (427°C) at any rate
SAE Ti-6Al-4V Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
SAE Ti-6Al-4V Matériaux équivalents internationaux
Affichage de 15 résultats sur 87.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 87 équivalents internationaux ?
Consultez les 87 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 87Références croisées
- 44Composition
- 24Propriétés mécaniques
- -Propriétés physiques
- 3Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- 2Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 24Fournisseurs totaux