GB ZG10Cr9MoV Cast steels
Data updates
This material has 279 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GB ZG10Cr9MoV Chemical Composition
GB/T 16253: 2019 / Steel castings for pressure purposes
Looking for full material performance data?
Free registration required • Instant access
GB ZG10Cr9MoV Physical Properties
Temperature
This material has 279 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GB ZG10Cr9MoV Heat Treatments
- Normalized (+NT) at 1040 to 1080°C and Tempered at 730 to 800°C
- Normalized or quenched at 1040-1080°C; Tempered at 730-800°C.
The holding time for normalizing or quenching heating should be calculated based on the maximum wall thickness of the casting loaded in the furnace. When the thickness is less than or equal to 25 mm, the holding time shall not be less than 1 hour. For every 25 mm increase in wall thickness, the holding time shall increase by 1 hour.
GB ZG10Cr9MoV Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GB ZG10Cr9MoV International Equivalent Materials
Showing 15 of 147 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 147 international equivalents?
See all 147 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 147Cross References
- 28Composition
- 6Mechanical Properties
- 1Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 95Total Suppliers