PROPRIETARY Assab ASP 60 Structural and constructional steels
Data updates
This material has 43 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Assab ASP 60 Chemical Composition
ASSAB Pacific Pte. Ltd., Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Assab ASP 60 Physical Properties
Temperature
This material has 43 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Assab ASP 60 Heat Treatments
- Soft annealing: Protect the steel and heat through to 850 - 900°C. Cool in the furnace at 10°C/h to 700°C, then freely in air. Stress relieving: After rough machining, the tool should be heated through to 600 - 700°C, holding time 2 h. Cool slowly to 500°C, then freely in air. Tempering: Preheating temperature: 450 - 500°C and 850 - 900°C. Austenitising temperature: 1100 - 1180°C, according to the desired final hardness. Tempering should always be carried out at 560°C irrespective of the austenitising temperature. Temper three times for 1 h at full temperature. The tool should be cooled to room temperature between the tempers.
PROPRIETARY Assab ASP 60 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Assab ASP 60 International Equivalent Materials
Showing 6 of 8 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 8 international equivalents?
See all 8 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 8Cross References
- 6Composition
- 1Mechanical Properties
- 17Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 8Total Suppliers