PROPRIETARY CHRONIFER Special 35 P Stainless steels
Data updates
This material has 855 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CHRONIFER Special 35 P Chemical Composition
L. Klein SA, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CHRONIFER Special 35 P Physical Properties
Temperature
This material has 855 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CHRONIFER Special 35 P Heat Treatments
- Forming; Warm, i.e. forging: 960 – 1100°C, quenching/fast cooling. In case the working temperature should fall below 960°C, it is advisable to submit the parts to a solution anneal. Solution anneal: 1060-1080°C, quenching/fast cooling. A minimum cold reduction of = 10 – 15% is recommended to reduce the risk of a too fast and strong grain growth. Temperature below 960°C should be avoided to eliminate the risk of precipitating the undesirable s (Sigma) phase. The formation of s (Sigma) phase leads to brittleness, reduction of the ductility and corrosion resistance. In such cases a solution anneal at 1060-1080°C is recommended.
PROPRIETARY CHRONIFER Special 35 P Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CHRONIFER Special 35 P International Equivalent Materials
Showing 15 of 473 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 473 international equivalents?
See all 473 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 473Cross References
- 10Composition
- 3Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 351Total Suppliers