ISO 4568-177-00-I Stainless steels
Data updates
This material has 438 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ISO 4568-177-00-I Chemical Composition
ISO 15510: 2014 / Stainless steels -- Chemical composition
Looking for full material performance data?
Free registration required • Instant access
ISO 4568-177-00-I Physical Properties
Temperature
This material has 438 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ISO 4568-177-00-I Heat Treatments
- Heat treated at 450-490°C; Duration: <= 1h; Air cooling; The optimum heat treatment conditions may be very different. The spring manufacturer shall choose those conditions answering the purpose; The heat treatment data refer to compression springs, torsion and tension (springs without initial tension).
- Hot forming: 1150-900°C, air cooling; Solution annealing (+AT): 1030-1050°C air cooling; Precipitation hardening (+P1300): Annealing from 760°C (40 min) to 820°C (30 min) and quick cooling to max 20°C, cooling within 1h at 12°C, reheating in air to +20°C. Precipitation hardening from 480°C 2h to 550°C 1h; Precipitation hardening (+P1450): Annealing from 945 to 965°C (10 min) and quick cooling to max 20°C, cooling within 1h to -70°C, holding time 8h, reheating in air to +20°C. Precipitation hardening from 500°C to 520°C 1h.
ISO 4568-177-00-I Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ISO 4568-177-00-I International Equivalent Materials
Showing 15 of 192 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 192 international equivalents?
See all 192 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 192Cross References
- 40Composition
- 45Mechanical Properties
- 10Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 9Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 137Total Suppliers