DIN 1.4568 Stainless steels
Data updates
This material has 673 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.4568 Chemical Composition
DIN 17224: 1982 / Stainless steel wire and strip for springs; technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
DIN 1.4568 Physical Properties
Temperature
This material has 673 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.4568 Heat Treatments
- Condition (K + Artificial ageing): Tempering or single artificial ageing at 480 to 550°C, cooling in air 1 to 2h
Solution annealing and Two stages artificial ageing:
1st stage: Temperature at 760 to 820°C, cooling in water or air to below 12°C. Lower maximum temperatures may be needed it is needed if ii is attempted to obtain a higher tensile strength than is given;
2st stage: Temperature at 480 to 550°C, cooling in air 1 – 2h - Delivery condition: Solution treated; 1025 ≤ T ≤ 1055°C for at least 30 min; air cooled (AC) or oil quenched (OQ).
Use condition: Solution treated and precipitation hardened; 740 ≤ T ≤ 780°C for at least 90 min + cool to T ≤ 20°C within 1 h; hold for 30 min + 550 ≤ T ≤ 580°C for at least 90 min; air cool (AC).
DIN 1.4568 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.4568 International Equivalent Materials
Showing 15 of 240 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 240 international equivalents?
See all 240 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 240Cross References
- 74Composition
- 112Mechanical Properties
- 34Physical Properties
- 8Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- 3Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 7Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 192Total Suppliers