PROPRIETARY SOLEIL C5 Stainless steels
Data updates
This material has 264 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SOLEIL C5 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SOLEIL C5 Physical Properties
Temperature
This material has 264 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SOLEIL C5 Heat Treatments
- Air or water quenched after heat treatment at 950 - 1050°C. A tempering treatment is performed in the 600 - 700°C range.
- Air or water quenched after heat treatment at 950 - 1050°C (1742 - 1922°F). A tempering treatment is performed in the 600 - 700°C (1112 - 1292°F) range.
Hot forming should be carried out in the temperature range 1100 - 800°C (2012 - 1472°F) followed by air cooling and followed by heat treatment.
Cold forming, when performed, a final stress relieving treatment may be requested. Typical temperature range is 580 - 620°C (1076 - 1148°F), for 2 hours.
The grade may be hardened by heat treatment. Minimum 700 MPa (102 ksi) yield strength may be guaranteed.
PROPRIETARY SOLEIL C5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SOLEIL C5 International Equivalent Materials
Showing 15 of 101 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 101 international equivalents?
See all 101 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 101Cross References
- 14Composition
- 35Mechanical Properties
- 39Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- 2Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 69Total Suppliers