PROPRIETARY KeyLos 1730 Tool steels
Data updates
This material has 381 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY KeyLos 1730 Chemical Composition
Lucchini RS, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY KeyLos 1730 Physical Properties
Temperature
This material has 381 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY KeyLos 1730 Heat Treatments
- Supplied in normalised condition with surface lower than 200 HB. Soft annealing: at 700°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace. Stress relieving at 400°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace. If the suggested temperature is lower than the tempering temperature, the stress relieving temperature will be 50°C lower than the tempering temperature previously applied. Hardening: at 830°C, soaking time 60 min every 25 mm thickness, cooling oil or water quench. The tempering temperature to be applied to the material depends on the required mechanical properties, soaking time 60 min every 25 mm thickness, cooling at room temperature.
PROPRIETARY KeyLos 1730 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY KeyLos 1730 International Equivalent Materials
Showing 15 of 199 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 199 international equivalents?
See all 199 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 199Cross References
- 3Composition
- 2Mechanical Properties
- 8Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 168Total Suppliers