PROPRIETARY SUPERELSO 500 Structural and constructional steels
Data updates
This material has 481 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SUPERELSO 500 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SUPERELSO 500 Physical Properties
Temperature
This material has 481 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SUPERELSO 500 Heat Treatments
- Austenitizing and tempering: austenitizing at 900 - 950°C, water quenching. Tempering after water quenching according to the manufacturer’s recommendations. Stress relieving (Post Weld Heat Treatment) at 600 - 635°C. As the properties o are obtained by water quenching and tempering, old forming (+ stress relief for high strains), warm forming or hot forming can be applied: cold forming (< 150°C): to be followed by Post-Weld Heat Treatment (PWHT), warm forming (< 550°C): to be followed by PWHT, hot forming (900-1100°C): to be followed by complete heat treatment (water quench and temper) followed by PWHT.
- Cold forming: < 150°C, to be followed by PWHT;
Warm forming: < 550°C, to be followed by PWHT;
Hot forming: 900-1100°C, to be followed by complete heat treatment (water quench and temper) followed by PWHT.
Heat treatment:
Austenitizing and tempering: austenitizing at 900 - 950°C, water quenching. Tempering after water quenching according to the manufacturer’s recommendations.
Stress relieving (post weld heat treatment) at 600 - 635°C.
PROPRIETARY SUPERELSO 500 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SUPERELSO 500 International Equivalent Materials
Showing 15 of 218 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 218 international equivalents?
See all 218 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 218Cross References
- 16Composition
- 32Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 2Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 208Total Suppliers