SAE 5355 Stainless steels
Data updates
This material has 74 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 5355 Chemical Composition
SAE AMS 5355J: 2009 / Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
Looking for full material performance data?
Free registration required • Instant access
SAE 5355 Physical Properties
Temperature
This material has 74 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 5355 Heat Treatments
- Homogenization heat treatment: heat to 1149°C ± 14°C (2100°F ± 25°F), hold at heat for not less than 90 minutes, and cool as required to below 21°C (70°F).
Solution heat treatment: heat to 1038°C ± 14°C (1900°F ± 25°F), hold at heat for 1 hour per 25 mm of section thickness but not less than 30 minutes, and cool as required to below 21°C (70°F).
Precipitation heat treatment: heat to 496°C ± 6°C (925°F ± 10°F), hold at heat for not less than 90 minutes, and cool in air.
Precipitation heat treat parameters:
H900: Heat to 482°C ± 6°C (900°F ± 10°F) hold 90 minutes minimum
H925: Heat to 496°C ± 6°C (925°F ± 10°F) hold 90 minutes minimum
H1000: Heat to 538°C ± 6°C (1000°F ± 10°F) hold 90 minutes minimum
H1025: Heat to 552°C ± 6°C (1025°F ± 10°F) hold 90 minutes minimum
H1100: Heat to 593°C ± 6°C (1100°F ± 10°F) hold 90 minutes minimum
H1150: Heat to 621°C ± 6°C (1150°F ± 10°F) hold 90 minutes minimum
SAE 5355 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 5355 International Equivalent Materials
Showing 15 of 18 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 18 international equivalents?
See all 18 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 18Cross References
- 13Composition
- 31Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 8Total Suppliers