NBN 12 Ni 14 Structural and constructional steels
Data updates
This material has 609 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NBN 12 Ni 14 Chemical Composition
EN 10222-3: 2017 / Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Looking for full material performance data?
Free registration required • Instant access
NBN 12 Ni 14 Physical Properties
Temperature
This material has 609 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NBN 12 Ni 14 Heat Treatments
- Normalized (+N):
Austenitizing at 830 to 880°C and air cooling.
Normalized and tempered (+NT):
Austenitizing at 830 to 880°C and air cooling; Tempering at 580 to 640°C and air or water cooling.
Quenched and tempered (+QT):
Austenitizing at 820 to 870°C and water and oil cooling. Tempering at 580 to 640°C and air or water cooling. - 1. Normalized (+N): Austenitized or solution annealed at 830 to 880°C and air cooled;
2. Normalized and tempered (+ NT): Austenitized or solution annealed at 830 to 880°C and air cooled; Tempered at 580 to 640°C and air or water cooled;
3. Quenched and tempered (+QT): Austenitized or solution annealed at 820 to 870°C and oil or water cooled; Tempered at 580 to 640°C and air or water cooled.
NBN 12 Ni 14 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NBN 12 Ni 14 International Equivalent Materials
Showing 15 of 151 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 151 international equivalents?
See all 151 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 151Cross References
- 35Composition
- 99Mechanical Properties
- 3Physical Properties
- 6Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 12Creep
- 25Joints
- -Coatings
- 174Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 104Total Suppliers