UNE X15Cr13 Stainless steels
Data updates
This material has 533 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNE X15Cr13 Chemical Composition
UNE 36016-1 / Stainless steels. Technical delivery conditions for wire-rod and forgings for general purposes
Looking for full material performance data?
Free registration required • Instant access
UNE X15Cr13 Physical Properties
Temperature
This material has 533 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNE X15Cr13 Heat Treatments
- Hot forming: 1100-800°C, air cooling.
A - Annealing: 750-810°C;
QT550 - Quenching: 950-1050°C, air or oil cooling; Tempering: 700-780°C;
QT650 - Quenching: 950-1050°C, air or oil cooling; Tempering: 660-700°C - Hot working (slow cooling): 1100-800°C
+A - Annealing (furnace or air cooling): 750-800°C
+QT650 - Quenching (air or oil cooling): 950-1030°C, Tempering: 700-750°C.
Hot formed conditions:
1U - Hot formed, not heat treated, not descaled.
1C - Hot formed, heat treated, not descaled.
1E - Hot formed, heat treated, mechanically descaled.
1D - Hot formed, heat treated, pickled, coated (optional).
1X - Hot formed, heat treated, rough machined.
1G - Hot formed, heat treated, descaled, rough machined or shaved in the case of rod.
Cold processed conditions:
2H - Finishes 1E, 1D or 1X, cold processed, coated (optional).
2D - Finish 2H, heat treated, pickled and skin- passed (optional), coated (optional).
2B - Finishes 1E, 1D or 1X, cold processed, mechanically smoothed.
2G - Finishes 2H, 2D or 2B, centreless ground, mechanically smoothed (optional).
P - Finishes 2H, 2D, 2B or 2G, specular polishing.
UNE X15Cr13 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNE X15Cr13 International Equivalent Materials
Showing 15 of 254 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 254 international equivalents?
See all 254 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 254Cross References
- 25Composition
- 35Mechanical Properties
- 17Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 9Joints
- -Coatings
- 4Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 181Total Suppliers