ASME X15Cr13 Stainless steels
Data updates
This material has 166 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME X15Cr13 Chemical Composition
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes, EN 10088-2, 2014
Looking for full material performance data?
Free registration required • Instant access
ASME X15Cr13 Physical Properties
Temperature
This material has 166 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME X15Cr13 Heat Treatments
- Hot forming at 1100 to 800°C, air cooling
Annealing (+A) at 750 to 810°C;
Quenching (+QT550) at 950 to 1050°C, air or oil cooling and Tempering at 700 to 780°C;
Quenching (+QT650) at 950 to 1050°C, air or oil cooling and Tempering at 660 to 700°C;
Temperatures of annealing, quenching and tempering shall be agreed for simulated heat-treated test pieces;
If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred, or even exceeded. - Hot working (slow cooling): 1100-800°C; +A - Annealing (furnace or air cooling): 750-800°C; +QT650 - Quenching (air or oil cooling): 950-1030°C; Tempering: 700-750°C.
ASME X15Cr13 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME X15Cr13 International Equivalent Materials
Showing 15 of 72 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 72 international equivalents?
See all 72 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 72Cross References
- 12Composition
- 32Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 45Total Suppliers