SAE
Norm · Vereinigte Staaten · 1888 Referenzen
| Normnummer | Materialien | |
|---|---|---|
| SAE AMS 2447D SAE AMS 2447D (Beschichtung, thermisches Spritzen. Hochgeschwindigkeits-Sauerstoff/Brennstoff-Prozess) | 10 | chevron_right |
| SAE AMS 2461A SAE AMS 2461A (Beschichtung, Zink-Nickel-Legierung (12 bis 16% Ni)) | 1 | chevron_right |
| SAE AMS 2469K SAE AMS 2469K (Harte, anodische Beschichtung, Behandlung für Aluminium und Aluminiumlegierungen) | 1 | chevron_right |
| SAE AMS 2485M SAE AMS 2485M (Beschichtung, schwarzes Oxid) | 1 | chevron_right |
| SAE AMS 2675J SAE AMS 2675J (Hartlöten, Nickellegierungen, Füllmetall) | 1 | chevron_right |
| SAE AMS 2759/1J SAE AMS 2759/1J (Wärmebehandelte Kohlenstoff- und niedriglegierte Stahlteile, minimaler Burchwiderstand unter 220 ksi (1517 MPa)) | 38 | chevron_right |
| SAE AMS 2759/2K SAE AMS 2759/2K (Wärmebehandelte,niedriglegierte Stahlteile, minimaler Zugfestigkeit 220 ksi (1517 MPa) und höher) | 15 | chevron_right |
| SAE AMS 2759/3J SAE AMS 2759/3J (Wärmebehandlung Ausscheidungshärtung von korrosionsbeständigen, maraging- und sekundär gehärteten Stahlteilen) | 19 | chevron_right |
| SAE AMS 2768C SAE AMS 2768C (Wärmebehandlung von legierten Magnesiumgüssen) | 16 | chevron_right |
| SAE AMS 2770P SAE AMS 2770P (Wärmebehandlung von gekneteten, legierten Aluminiumteilen) | 23 | chevron_right |
| SAE AMS 2771F SAE AMS 2771F (Wärmebehandlung von legierten Aluminiumgüssen) | 27 | chevron_right |
| SAE AMS 2772H SAE AMS 2772H (Wärmebehandlung von legierten Aluminiumrohmaterialien) | 53 | chevron_right |
| SAE AMS 2801D SAE AMS 2801D (Wärmebehandlung von legierten Titanteilen) | 17 | chevron_right |
| SAE AMS 3196H SAE AMS 3196H (Schwamm, Silikonkautschuk mit geschlossenen Zellen, fest) | 1 | chevron_right |
| SAE AMS 3200 SAE AMS 3200 (Butadien-Acrylnitril (NBR)-Gummi, resistent gegen mineralölbasierende Hydraulikflüssigkeit, 55-65) | 1 | chevron_right |
| SAE AMS 3201 SAE AMS 3201 (Butadien-Acrylnitril (NBR)-Gummi, Trockenhitzeresistent, 35-45) | 1 | chevron_right |
| SAE AMS 3202 SAE AMS 3202 (Butadien-Acrylnitril (NBR)-Gummi, Trockenhitzeresistent, 55-65) | 1 | chevron_right |
| SAE AMS 3204 SAE AMS 3204 (Synthetischer Gummi, Tieftemperaturresistent, 25-35) | 1 | chevron_right |
| SAE AMS 3205 SAE AMS 3205 (Elastomer: Synthetic Rubber (CR or NBR) Low-Temperature -40 °F Resistant 45 to 55 Durometer Type ‘A’ Hardness) | 1 | chevron_right |
| SAE AMS 3207 SAE AMS 3207 (Chloropren (CR) Kautschuk, witterungsbeständig, 25-35) | 1 | chevron_right |
| SAE AMS 3208 SAE AMS 3208 (Chloropren (CR) Kautschuk, witterungsbeständig, 45-55) | 1 | chevron_right |
| SAE AMS 3209 SAE AMS 3209 (Chloropren (CR) Kautschuk, witterungsbeständig, 65-75) | 1 | chevron_right |
| SAE AMS 3210 SAE AMS 3210 (Elektrischer Widerstand aus Chloropren (CR) -Kautschuk 65 - 75) | 1 | chevron_right |
| SAE AMS 3212 SAE AMS 3212 (Elastomer: Acrylnitril-Butadien-Kautschuk (NBR) Aromatisch Kraftstoffbeständig 55 bis 65 Typ 'A' Durometerhärte Für Produkte in: Aromatische und aliphatische Kraftstoffsysteme) | 1 | chevron_right |
| SAE AMS 3213 SAE AMS 3213 (Acrylnitril Butadien (NBR) Gummiaromatisch Kraftstoffbeständig 75 - 85) | 1 | chevron_right |
| SAE AMS 3214 SAE AMS 3214 (Acrylnitril Butadien (NBR) Gummiaromatisch Kraftstoffbeständig 35 - 45) | 1 | chevron_right |
| SAE AMS 3215 SAE AMS 3215 (Acrylnitril Butadien (Nbr) Gummiaromatisch Kraftstoffbeständig 65-75) | 1 | chevron_right |
| SAE AMS 3216 SAE AMS 3216 (Elastomer: Fluorkohlenstoff (FKM)-Gummi, hochtemperaturbeständig - flüssigkeitsresistent, geringe Druckverformung / 70 bis 80 Shore A Härte für Produkte in Kraftstoffsystemen und spezifischen Motorölsystemen) | 1 | chevron_right |
| SAE AMS 3217/1 SAE AMS 3217/1 (Prüfplatten, Acrylnitril-Butadien (NBR-H) Mittel-Hoch Acrylnitril, 65 - 75) | 1 | chevron_right |
| SAE AMS 3217/2 SAE AMS 3217/2 (Testplatten, Acrylnitril-Butadien (NBR-L) Niedriger Acrylnitrilgehalt, 65 - 75) | 1 | chevron_right |
| SAE AMS 3217/3 SAE AMS 3217/3 (Testplatten, Chloropren (CR) 70-80) | 1 | chevron_right |
| SAE AMS 3217/4 SAE AMS 3217/4 (Testplatten, Fluorelastomer (FMK) 65 - 75) | 1 | chevron_right |
| SAE AMS 3217/5 SAE AMS 3217/5 (Testplatten, Fluorsilikon (FVMQ) 55 - 85) | 1 | chevron_right |
| SAE AMS 3217/7 SAE AMS 3217/7 (Testplatten, hochfest, Fluorsilikon (FVMQ) 55 - 65) | 1 | chevron_right |
| SAE AMS 3217/8 SAE AMS 3217/8 (Testplatten, Fluorelastomer (FKM), Härte 70-80, für verbesserte Verträglichkeit des Gasturbinen-Motorenöls) | 1 | chevron_right |
| SAE AMS 3218 SAE AMS 3218 (Elastomer: Fluorkohlenstoff (FKM)-Gummi, hochtemperaturflüssigkeitsbeständig, geringe Druckverformung / 85 bis 95 Shore A Härte, für Dichtungen in Kraftstoffsystemen und speziellen Motorölsystemen) | 1 | chevron_right |
| SAE AMS 3220 SAE AMS 3220 (Gummi, synthetischer Allzweck, flüssigkeitsbeständig 55 - 65) | 1 | chevron_right |
| SAE AMS 3222 SAE AMS 3222 (Heißölbeständig aus synthetischem Kautschuk, hohe Quellung 45 - 55) | 1 | chevron_right |
| SAE AMS 3224 SAE AMS 3224 (Nitril-Butadien-Kautschuk-Kraftstoff, Feuer und Ozon beständig 65 - 75) | 1 | chevron_right |
| SAE AMS 3226 SAE AMS 3226 (Elastomer: Heißöl- und Kühlmittelbeständigkeit gegen Acrylnitril-Butadien-Kautschuk (NBR), Low Swell 45 bis 55 Durometerhärte Typ A für Produkte in Motorölsystemen / Kühlmittelsystemen) | 1 | chevron_right |
| SAE AMS 3227 SAE AMS 3227 (Acrylnitril-Butadien (NBR) -Kautschuk, heißöl- und kühlmittelbeständig, quellarm 55 - 65) | 1 | chevron_right |
| SAE AMS 3229 SAE AMS 3229 (Acrylnitril-Butadien (NBR) -Kautschuk heißölbeständig, Low Swell 75 - 85) | 1 | chevron_right |
| SAE AMS 3237 SAE AMS 3237 (Butyl (IIR) Kautschukphosphatester beständig 35 - 45) | 1 | chevron_right |
| SAE AMS 3238 SAE AMS 3238 (Butyl (IIR) Kautschukphosphatester beständig 65 - 75) | 1 | chevron_right |
| SAE AMS 3240 SAE AMS 3240 (Chloropren (CR) Kautschuk, witterungsbeständig, 35-45) | 1 | chevron_right |
| SAE AMS 3241 SAE AMS 3241 (Chloropren (CR) Kautschuk, witterungsbeständig, 55-65) | 1 | chevron_right |
| SAE AMS 3242 SAE AMS 3242 (Wetterbeständig gegen Chloropren (CR) 75 - 85) | 1 | chevron_right |
| SAE AMS 3243 SAE AMS 3243 (Chloropren (CR) Kautschuk, schwer entflammbar, 55 - 65) | 1 | chevron_right |
| SAE AMS 3244 SAE AMS 3244 (Chloropren (CR) Kautschuk, schwer entflammbar, 65-75) | 1 | chevron_right |
| SAE AMS 3248 SAE AMS 3248 (Beständigkeit gegen Ethylen-Propylen (EPM) -Kautschukphosphatester 55 - 65) | 1 | chevron_right |
| SAE AMS 3249 SAE AMS 3249 (Ethylen Propylen (EPDM) Kautschuk Hydrazin-Base-Fluid Resistant 75 - 85) | 1 | chevron_right |
| SAE AMS 3250 SAE AMS 3250 (Synthetische Kautschuk- und Korkzusammensetzung, weich) | 1 | chevron_right |
| SAE AMS 3251 SAE AMS 3251 (Synthetische Kautschuk- und Korkzusammensetzung Allzweckmedium) | 1 | chevron_right |
| SAE AMS 3252 SAE AMS 3252 (Synthetische Kautschuk- und Korkzusammensetzung Allzweck) | 1 | chevron_right |
| SAE AMS 3253 SAE AMS 3253 (Beständigkeit gegen Ethylen-Propylen-Kautschuk-Phosphatester 65 - 75) | 1 | chevron_right |
| SAE AMS 3258 SAE AMS 3258 (Dichtungsmasse, Polythioether für Flugzeugwindschutzscheiben und -überdachungen, für den Einsatz bis 300 °F) | 3 | chevron_right |
| SAE AMS 3260 SAE AMS 3260 (Ethylen-Propylen-Dien (EPDM) -Kautschuk Allzweck 45 - 55) | 1 | chevron_right |
| SAE AMS 3265 SAE AMS 3265 (Dichtungsmasse, Polysulfid (T)-Kautschuk, kraftstoffbeständig, nicht chromatiert, korrosionshemmend für den zeitweiligen Einsatz bis 182 °C (360 °F)) | 15 | chevron_right |
| SAE AMS 3266 SAE AMS 3266 (Dichtungsmasse, Polythioether-Elastomer, zweikomponentig, elektrisch leitfähig) | 4 | chevron_right |
| SAE AMS 3269 SAE AMS 3269 (Dichtungsmasse, Polysulfid (T)-Synthesekautschuk für integrierte Kraftstofftank- und Brennstoffzellenhohlräume, hochfest, für zeitweiligen Einsatz bis 360 °F (182 °C)) | 10 | chevron_right |
| SAE AMS 3275 SAE AMS 3275 (Folie, Acrylnitril-Butadien (NBR) -Kautschuk und asbestfreie Fasern, kraftstoff- und ölbeständig) | 1 | chevron_right |
| SAE AMS 3284 SAE AMS 3284 (Dichtmasse, geringe Haftung, für abnehmbare Verkleidungen und Tankinspektionsplatten) | 8 | chevron_right |
| SAE AMS 3301H SAE AMS 3301H (Silikon, Gummi, universell einsetzbar, 40 Durometer) | 1 | chevron_right |
| SAE AMS 3302J SAE AMS 3302J (Silikon-Kautschuk, universell einsetzbar, 50 Durometer) | 1 | chevron_right |
| SAE AMS 3304 SAE AMS 3304 (Elastomer: Silikon, Gummi (MQ/VMQ) universell einsetzbar 65 - 75 Durometer Typ 'A' Härte) | 1 | chevron_right |
| SAE AMS 3305 SAE AMS 3305 (Elastomer: Silikonkautschuk, (VMQ) Allzweck, 75 - 85 Durometer Typ 'A' Härte) | 1 | chevron_right |
| SAE AMS 3306 SAE AMS 3306 (Elastomer: Methyl/Methylvinylsilikon, (MQ/MVQ) Hochtemperatur-/Gasturbinen-Motoröl/Phosphat-Ether-Hydraulikflüssigkeitsbeständig Hohe Festigkeit/Hohe Reißfestigkeit/Hoher Modul 55 bis 65 Typ „A“ Härte für Produkte in Hochtemperaturumgebungen/Gasturbinen-Motor Öle) | 1 | chevron_right |
| SAE AMS 3316 SAE AMS 3316 (Elastomer: Silikonkautschuk (MQ/VMQ), glasfaserverstärkt, Härte 65 bis 75 Shore A) | 1 | chevron_right |
| SAE AMS 3325 SAE AMS 3325 (Fluorsilikonkautschuk (FVMQ) Kraftstoff- und ölbeständig 55 - 65 Durometer Typ 'A' Härte für Produkte in Kraftstoffsystemen / Schmierölen) | 1 | chevron_right |
| SAE AMS 3327 SAE AMS 3327 (Elastomer: Fluorsilikonkautschuk (FVMQ) Hochtemperatur-, Hochmodul-, Kraftstoff- und Ölbeständigkeit 70 - 80 Shore A-Härte für Produkte in Kraftstoffsystemen / Schmierölen) | 1 | chevron_right |
| SAE AMS 3328 SAE AMS 3328 (Fluorsilikon (FVMQ) Kautschuk kraftstoff- und ölbeständig 35 - 45) | 1 | chevron_right |
| SAE AMS 3329 SAE AMS 3329 (Elastomer: Fluorsilikon-Gummi (FVMQ), kraftstoff- und ölbeständig, hochfest, 45-55 Shore A Härte, für Produkte in Kraftstoffsystemen / Schmierölen) | 1 | chevron_right |
| SAE AMS 3330 SAE AMS 3330 (Elastomer: Fluorsilikon (FVMQ) Kautschuk, kraftstoff- und ölbeständig 45 - 55 Für Produkte in Kraftstoffsystemen / Schmierölen) | 1 | chevron_right |
| SAE AMS 3331 SAE AMS 3331 (Elastomer: Fluorsilikonkautschuk (FVMQ) Kraftstoff- und ölbeständig 65 - 75 Shore A-Härte für Produkte in Kraftstoffsystemen / Schmierölen) | 1 | chevron_right |
| SAE AMS 3332 SAE AMS 3332 (Extrem niedertemperaturbeständiger Silikonkautschuk 15 - 30) | 1 | chevron_right |
| SAE AMS 3333 SAE AMS 3333 (Dichtungsmasse, Polysulfid, für Windschutzscheiben und Hauben von Flugzeugen, zur Verwendung bis zu 250 °F (121 °C)) | 10 | chevron_right |
| SAE AMS 3334 SAE AMS 3334 (Extrem niedertemperaturbeständiger Silikonkautschuk 35 - 45) | 1 | chevron_right |
| SAE AMS 3336 SAE AMS 3336 (Silikonkautschuk (PVMQ) extrem niedrigtemperaturbeständig 55 - 65) | 1 | chevron_right |
| SAE AMS 3337 SAE AMS 3337 (Silikonkautschuk (PVMQ) extrem niedrigtemperaturbeständig 65 - 75) | 1 | chevron_right |
| SAE AMS 3338 SAE AMS 3338 (Silikonkautschuk (PVMQ) extrem niedrigtemperaturbeständig 75 - 85) | 1 | chevron_right |
| SAE AMS 3345 SAE AMS 3345 (Elastomer: Methylphenylvinylsilikon (PVMQ) Sehr niedrige Temperatur / Flugzeugkolben Motorölbeständig Hochfest / Reißfest 45 bis 55 Durometer Typ 'A' Härte Für Produkte in Flugzeugkolbenmotoröl / Niedertemperaturumgebungen) | 1 | chevron_right |
| SAE AMS 3347 SAE AMS 3347 (Elastomer: Methyl / Methylvinylsilikon (MQ / VMQ) Hochtemperaturbeständig Hochfest / Reißfest 45 bis 55 Typ 'A' Durometerhärte) | 1 | chevron_right |
| SAE AMS 3348 SAE AMS 3348 (Silikonkautschuk (VMQ) 7,93 MPa (1150 psi) Zugfestigkeit, hohe Elastizität 25 - 35) | 1 | chevron_right |
| SAE AMS 3349 SAE AMS 3349 (Silikonkautschuk (VMQ) 7,58 MPa (1100 psi) Zugfestigkeit, hohe Elastizität 65 - 75) | 1 | chevron_right |
| SAE AMS 3356 SAE AMS 3356 (Silikon (VMQ) Kautschukschmieröl und Druckfestigkeit, elektrische Qualität 55 - 65) | 1 | chevron_right |
| SAE AMS 3362 SAE AMS 3362 (Vulkanisieren bei Raumtemperatur mit Silikonkautschukverbindung, Durometer mit einer Viskosität von 15.000 Centipoise 35 - 55) | 1 | chevron_right |
| SAE AMS 3363 SAE AMS 3363 (Vulkanisieren bei Raumtemperatur mit Silikonkautschukverbindung, Durometer mit einer Viskosität von 50.000 Centipoise 30 - 45) | 1 | chevron_right |
| SAE AMS 3364 SAE AMS 3364 (Vulkanisieren bei Raumtemperatur mit Silikonkautschukverbindung, Viskosität von 50.000 Centipoise, kurze Anwendungsdauer, Durometer 35 - 55) | 1 | chevron_right |
| SAE AMS 3366 SAE AMS 3366 (Vulkanisieren bei Raumtemperatur mit Silikonkautschukverbindung, Durometer mit einer Viskosität von 55.000 Centipoise 55 - 70) | 1 | chevron_right |
| SAE AMS 3368 SAE AMS 3368 (Silikonharz, elastomere, transparente Härtung bei erhöhter Temperatur) | 1 | chevron_right |
| SAE AMS 3370 SAE AMS 3370 (Silikonharz, elastomer, transparent bei Raumtemperatur aushärten) | 1 | chevron_right |
| SAE AMS 3372 SAE AMS 3372 (Silikonharz, elastomere Härtung bei erhöhter Temperatur und hoher Reißfestigkeit) | 1 | chevron_right |
| SAE AMS 3375 SAE AMS 3375 (Kleb-/Dichtmittel, Fluorsilikon, beständig gegen aromatische Kraftstoffe, Einkomponenten-Vulkanisation bei Raumtemperatur) | 1 | chevron_right |
| SAE AMS 3384 SAE AMS 3384 (Gummi, Fluorkohlenstoff-Elastomer (FKM) 70 bis 80 Härte, Niedertemperatur-Dichtungs-Tg -22 °F (-30 °C) Für elastomere Formen oder Teile in Gasturbinen-Motoröl-, Kraftstoff- und Hydrauliksystemen) | 1 | chevron_right |
| SAE AMS 3611 SAE AMS 3611 (Plastikblech, Polycarbonat, Allgemeine Verwendung) | 1 | chevron_right |
| SAE AMS 3614 SAE AMS 3614 (Polycarbonatblech und -teile, Optische Sorte, beschichtet) | 1 | chevron_right |
| SAE AMS 3617 SAE AMS 3617 (Polyamid Typ 6-6, Kunststoffformteile und -profile) | 1 | chevron_right |
| SAE AMS 3619 SAE AMS 3619 (Harz, Polyimid, Laminierung Hochtemperaturbeständig, 315 °C (599 °F)) | 1 | chevron_right |
| SAE AMS 3626 SAE AMS 3626 (Kunststoffguss und Strangpressteile, Methylmethacrylat) | 1 | chevron_right |
| SAE AMS 3628 SAE AMS 3628 (Kunststoff-Strangpressteile und Formteile, Polycarbonat, Allgemeiner Gebrauch) | 1 | chevron_right |
| SAE AMS 3631 SAE AMS 3631 (Polyvinylchlorid (PVC) Kunststoff-Extrusionen, Hochtemperatur, Flexibel) | 1 | chevron_right |
| SAE AMS 3643 SAE AMS 3643 (Kunststoffguss, Silikon, Duroplast Glas Roving gefüllt, Wärmebeständig) | 1 | chevron_right |
| SAE AMS 3644 SAE AMS 3644 (Polyimid für geformte Stäbe, Stangen, Rohre, Platten und geformte Teile) | 14 | chevron_right |
| SAE AMS 3645 SAE AMS 3645 (Polychlortrifluorethylen (PCTFE), formgepresste schwere Profile, weichmacherfrei) | 1 | chevron_right |
| SAE AMS 3646 SAE AMS 3646 (Platte, geformt aus Polychlortrifluorethylen (PCTFE), weichmacherfrei) | 1 | chevron_right |
| SAE AMS 3652 SAE AMS 3652 (Polytetrafluorethylen (PTFE) Film unkritische Sorte) | 1 | chevron_right |
| SAE AMS 3660 SAE AMS 3660 (Polytetrafluorethylen (PTFE) Formteile allgemeine Sorte, gesintert) | 1 | chevron_right |
| SAE AMS 3668 SAE AMS 3668 (Polytetrafluorethylen (PTFE) Formteile Premiumqualität, gesintert) | 1 | chevron_right |
| SAE AMS 3669 SAE AMS 3669 (Polytetrafluorethylen (PTFE)-Platten, geformte Premiumqualität, gesintert.) | 2 | chevron_right |
| SAE AMS 3670/1 SAE AMS 3670/1 (Aus ungefülltem Polyamid-Imid (PAI) hergestellte Stäbe, Stangen und Formteile) | 3 | chevron_right |
| SAE AMS 3670/2 SAE AMS 3670/2 (Geformte oder extrudierte Stangen, Stäbe und Formen aus 20% Graphit - 3% Polytetrafluorethylen (PTFE) gefülltem Polyamid-Imid (PAI) Material) | 3 | chevron_right |
| SAE AMS 3670/3 SAE AMS 3670/3 (Stangen, Stäbe und Formen aus 12% Graphit - 3% Polytetrafluorethylen (PTFE) gefülltem Polyamid-Imid (PAI) Material) | 3 | chevron_right |
| SAE AMS 3670/4 SAE AMS 3670/4 (Stangen, Stangen und Formen aus 30 % glasfasergefülltem Polyamid-Imid (PAI)-Material) | 3 | chevron_right |
| SAE AMS 3670/5 SAE AMS 3670/5 (Stangen, Stäbe und Formen aus 30% kohlenstofffasergefülltem Polyamid-Imid (PAI) Material) | 3 | chevron_right |
| SAE AMS 3679C SAE AMS 3679C (Isolation, thermische, keramische Faser) | 1 | chevron_right |
| SAE AMS 3684 SAE AMS 3684 (Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled) | 1 | chevron_right |
| SAE AMS 3688 SAE AMS 3688 (Klebstoff, schäumend, Wabenkernspleiß, strukturell −55 bis +82 °C (−65 bis +180 °F)) | 1 | chevron_right |
| SAE AMS 3689 SAE AMS 3689 (Klebstoff, Schäumen, Wabenstruktur, Kernspleiß, Strukturell −54 bis +177 °C (−65 bis +350 °F)) | 1 | chevron_right |
| SAE AMS 3710 SAE AMS 3710 (Sandwich Structures, Glass Fabric-Resin Low Pressure Molded, Heat Resistant) | 1 | chevron_right |
| SAE AMS 3711E SAE AMS 3711E (Kern, Honigwabe, faserig, Aramid-Basis, Phenolisch beschichtet) | 40 | chevron_right |
| SAE AMS 3712C SAE AMS 3712C (Kern, Honigwabe, Glas/Polyimid) | 20 | chevron_right |
| SAE AMS 3713D SAE AMS 3713D (Kern, Flexible Honigwaben, Polyamidpapier-Basis, Phenolisch beschichtet) | 14 | chevron_right |
| SAE AMS 3714D SAE AMS 3714D (Kern, überdehnte Wabe, Polyamid-Papierbasis, phenolbeschichtet) | 6 | chevron_right |
| SAE AMS 3715D SAE AMS 3715D (Kern, Honigwabe, Glas/Phenolisch) | 30 | chevron_right |
| SAE AMS 3716C SAE AMS 3716C (Kern-, Waben-, Glas- / Phenol-Bias-Webfaserkonstruktion) | 14 | chevron_right |
| SAE AMS 3742 SAE AMS 3742 (Elastomer: Gummi, Silikon (MQ/VMQ/PVMQ) Flammschutzmittel, geringe Rauchdichte, geringe Rauchtoxizität 50 – 60 Durometer Typ A Härte für Produkte im Innenraum von unter Druck stehenden Flugzeugabteilen) | 1 | chevron_right |
| SAE AMS 3786 SAE AMS 3786 (Elastomer: Nitrilkautschuk (NBR) Synthetische Ölbeständige Platten, 65 bis 75 Typ A Härte für Produkte in Motorölsystemen) | 1 | chevron_right |
| SAE AMS 3787/1B SAE AMS 3787/1B (Faden, Para-Aramid mittlerer Modul 10,000 yards pro Pfund (20,159 m/kg), 16 Pfund Kraft (71 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/2B SAE AMS 3787/2B (Faden, Para-Aramid mittlerer Modul 6700 yards pro Pfund (13,507 M/Kg), 25 Pfund Kraft (111 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/3B SAE AMS 3787/3B (Faden, Para-Aramid mittlerer Modul 5000 yards pro Pfund (10,080 m/kg), 35 Pfund Kraft (156 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/4B SAE AMS 3787/4B (Faden, Para-Aramid mittlerer Modul 3350 yards pro Pfund (6753 m/kg), 50 Pfund Kraft (222 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/5B SAE AMS 3787/5B (Faden, Para-Aramid mittlerer Modul 2000 yards pro Pfund (4032 M/Kg), 80 Pfund Kraft (356 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/6B SAE AMS 3787/6B (Faden, Para-Aramid mittlerer Modul 950 yards pro Pfund (1915 m/kg), 150 Pfund Kraft (667 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/7B SAE AMS 3787/7B (Faden, Para-Aramid mittlerer Modul 850 yards pro Pfund (1714 m/kg), 175 Pfund Kraft (778 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3787/8C SAE AMS 3787/8C (Faden, Para-Aramid mittlerer Modul 500 yards pro Pfund (1008 m/kg), 225 Pfund Kraft (1001 N) Bruchstärke) | 1 | chevron_right |
| SAE AMS 3821C SAE AMS 3821C (Cloth, type ʺEʺ Glass, ʺBʺ stage epoxy-resin-impregnated, 7781 style fabric, flame resistant) | 1 | chevron_right |
| SAE AMS 3824 SAE AMS 3824 (Gewebe, Glas, Oberflächenveredelt für Harz-Laminate) | 73 | chevron_right |
| SAE AMS 3826C SAE AMS 3826C (Cloth, type ʺEʺ glass ʺBʺ stage polyester resin impregnated 1581 and 7781 type fabric) | 1 | chevron_right |
| SAE AMS 3827C SAE AMS 3827C (Cloth, type ʺEʺ Glass, ʺBʺ stage polyester-resin-impregnated, 7781 style fabric, flame resistant) | 1 | chevron_right |
| SAE AMS 3828D SAE AMS 3828D (Glas Roving, Epoxidharz vorimprägniert, Typ E-Glas) | 1 | chevron_right |
| SAE AMS 3829C SAE AMS 3829C (Cloth, Type ʺEʺ Glass, Style 7781 Fabric, Solution-Addition-Type PMR-15 Polyimide Resin Impregnated) | 1 | chevron_right |
| SAE AMS 3831B SAE AMS 3831B (Cloth, Type ʺEʺ Glass, ʺBʺ Stage Epoxy-Resin-Impregnated, 7781 Style Fabric, Flame Resistant, Improved Strength) | 1 | chevron_right |
| SAE AMS 3832D SAE AMS 3832D (Roving, Type ʺS-2ʺ Glass, Epoxy Resin Impregnated) | 1 | chevron_right |
| SAE AMS 3834B SAE AMS 3834B (Cloth, Type ʺEʺ Glass, ʺBʺ Stage Polyester-Resin-Impregnated, 7781 Style Fabric, Flame Resistant, Improved Strength) | 1 | chevron_right |
| SAE AMS 3844C SAE AMS 3844C (Cloth, type ʺEʺ glass, style 7781 fabric, hot-melt, addition-type, polyimide resin impregnated) | 1 | chevron_right |
| SAE AMS 3845C SAE AMS 3845C (Cloth, type ʺEʺ glass, ʺBʺ stage addition cure polyimide-resin-impregnated) | 2 | chevron_right |
| SAE AMS 3846D SAE AMS 3846D (Gewebe, Quarz, Oberflächenveredelt für Harz-Laminate) | 15 | chevron_right |
| SAE AMS 3847 SAE AMS 3847 (Cloth, Quartz, ʺBʺ Stage Polyimide Resin Impregnated, Style 581 Fabric, 315°C (599°F)) | 1 | chevron_right |
| SAE AMS 3849C SAE AMS 3849C (Stoff, Quarz, Stil 581 Gewebe Hot-Melt, Additions-Typ, Polyimidharz imprägniert) | 1 | chevron_right |
| SAE AMS 3856/1B SAE AMS 3856/1B (Gewebe, Polster, Feuerresistent Novoloid/Aramid, Waffeltypwebung) | 1 | chevron_right |
| SAE AMS 3856/2B SAE AMS 3856/2B (Gewebe, Polster, Feuerresistentes Aramid, Leinenbindung) | 1 | chevron_right |
| SAE AMS 3856/3B SAE AMS 3856/3B (Gewebe, Polster, Feuerresistentes Nylon, Jacquardgewebe) | 1 | chevron_right |
| SAE AMS 3867/1C SAE AMS 3867/1C (Borfilament Band, Epoxidharz imprägniert Typ B4.0-E374 (Typ B0.102-E191)) | 1 | chevron_right |
| SAE AMS 3867/2C SAE AMS 3867/2C (Borfilament-Band, Epoxidharz imprägniert Typ B5.6-E374 (Type B0.142-E190)) | 1 | chevron_right |
| SAE AMS 3867/3C SAE AMS 3867/3C (Borfilament Band, Epoxidharz imprägniert Typ B8.0-E374 (Type B0.203-E190)) | 1 | chevron_right |
| SAE AMS 3867/4B SAE AMS 3867/4B (Borfilament Band, Epoxidharz imprägniert Typ B4.0-E180 (Type B0.102-E82)) | 1 | chevron_right |
| SAE AMS 3867/5B SAE AMS 3867/5B (Borfilament Band, Epoxidharz imprägniert Typ B5.6-E180 (Type B0.142-E82)) | 1 | chevron_right |
| SAE AMS 3867/6B SAE AMS 3867/6B (Borfilament Band, Epoxidharz imprägniert Typ B8.0-E180 (Type B0.203-E82)) | 1 | chevron_right |
| SAE AMS 3870E SAE AMS 3870E (Keramische Formteile und Extrusionen, Ultra dichtes Aluminiumoxid (99% Al203)) | 1 | chevron_right |
| SAE AMS 3880D SAE AMS 3880D (Kristallisierte Glaskeramik) | 1 | chevron_right |
| SAE AMS 3890B SAE AMS 3890B (Graphitgarn, Nichtstrukturelles 5Ply-Garn, 720 Filamente) | 1 | chevron_right |
| SAE AMS 3894/10B SAE AMS 3894/10B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 210,000 (1448) dehnbar, 20,000,000 (138) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/11B SAE AMS 3894/11B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 200,000 (1379) dehnbar, 18,000,000 (124) Modul, 80 (176)) | 1 | chevron_right |
| SAE AMS 3894/12B SAE AMS 3894/12B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 200,000 (1379) dehnbar, 18,000,000 (124) Modul, 120 (248)) | 1 | chevron_right |
| SAE AMS 3894/13B SAE AMS 3894/13B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 131,000 (903) dehnbar, 25,000,000 (172) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/14B SAE AMS 3894/14B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 90,000 (621) dehnbar, 40,000,000 (276) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/15B SAE AMS 3894/15B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 200,000 (1379) dehnbar, 21,000,000 (145) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/16B SAE AMS 3894/16B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 200,000 (1379) dehnbar, 21,000,000 (145) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/17B SAE AMS 3894/17B (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 200 (1379) dehnbar, 18.0 (124) Modul, 120 (248)) | 1 | chevron_right |
| SAE AMS 3894/18A SAE AMS 3894/18A (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 355,000 (2448) dehnbar, 22,000,000 (152) Modul, 130 (266)) | 1 | chevron_right |
| SAE AMS 3894/1C SAE AMS 3894/1C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 110,000 (758) dehnbar, 27,000,000 (186) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/2C SAE AMS 3894/2C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 150,000 (1034) dehnbar, 20,000,000 (138) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3894/3C SAE AMS 3894/3C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 150,000 (1034) dehnbar, 19,000,000 (131) Modul, 80 (176)) | 1 | chevron_right |
| SAE AMS 3894/5C SAE AMS 3894/5C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 110,000 (758) dehnbar, 27,000,000 (186) Modul, 80 (176)) | 1 | chevron_right |
| SAE AMS 3894/7C SAE AMS 3894/7C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 90,000 (621) dehnbar, 40,000,000 (276) Modul, 80 (176)) | 1 | chevron_right |
| SAE AMS 3894/8C SAE AMS 3894/8C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 70,000 (483) dehnbar, 36,000,000 (248) Modul, 80 (176)) | 1 | chevron_right |
| SAE AMS 3894/9C SAE AMS 3894/9C (Kohlenfaserband und -Blech, Epoxidharz-imprägniert, G 70,000 (483) dehnbar, 36,000,000 (248) Modul, 175 (347)) | 1 | chevron_right |
| SAE AMS 3897/1A SAE AMS 3897/1A (Kohlenfasergewebe, 8HS Strukturform, Epoxidharz-imprägniert) | 1 | chevron_right |
| SAE AMS 3899/1C SAE AMS 3899/1C (Kohlenfaserband und -Blech, Polysulfonharz-imprägniert, C PS 172 (1170) dehnbar, 16 (110) Modul, 120 (248)) | 1 | chevron_right |
| SAE AMS 3899/2C SAE AMS 3899/2C (Kohlenfaserband und -Blech, Polysulfonharz-imprägniert, C Ps 140 (956) dehnbar, 27 (186) Modul, 120 (248)) | 1 | chevron_right |
| SAE AMS 3902E SAE AMS 3902E (Gewebe, Organische Faser (Para-Aramid), Hohes Modul für strukturellen Verbund) | 11 | chevron_right |
| SAE AMS 3903/1B SAE AMS 3903/1B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 120, 175 (350)) | 1 | chevron_right |
| SAE AMS 3903/2B SAE AMS 3903/2B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 181, 175 (350)) | 1 | chevron_right |
| SAE AMS 3903/3B SAE AMS 3903/3B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 281, 175 (350)) | 1 | chevron_right |
| SAE AMS 3903/4B SAE AMS 3903/4B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 328, 175 (350)) | 1 | chevron_right |
| SAE AMS 3903/5B SAE AMS 3903/5B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 120, 80 (180)) | 1 | chevron_right |
| SAE AMS 3903/6B SAE AMS 3903/6B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 181, 80 (180)) | 1 | chevron_right |
| SAE AMS 3903/7B SAE AMS 3903/7B (Gewebe, Organische Faser, Hohes Modul, Epoxidharz-imprägniert, OC Style 281, 80 (180)) | 1 | chevron_right |
| SAE AMS 3903/8B SAE AMS 3903/8B (Gewebe, Organische Faser, Hohes Modul, Epoxyharz-imprägniert, OC Style 328, 80 (180)) | 1 | chevron_right |
| SAE AMS 3906/1C SAE AMS 3906/1C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup GL-I-36-120 (248)) | 1 | chevron_right |
| SAE AMS 3906/2C SAE AMS 3906/2C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup Gl-Iii-36-120 (250)) | 1 | chevron_right |
| SAE AMS 3906/3C SAE AMS 3906/3C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup GL-I-26-150 (302)) | 1 | chevron_right |
| SAE AMS 3906/4C SAE AMS 3906/4C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup GL-III-26-150 (302)) | 1 | chevron_right |
| SAE AMS 3906/5C SAE AMS 3906/5C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup GL-I-36-150 (302)) | 1 | chevron_right |
| SAE AMS 3906/6C SAE AMS 3906/6C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup GL-I-36-95 (203)) | 1 | chevron_right |
| SAE AMS 3906/7C SAE AMS 3906/7C (Ungewebtes Glas Faserband und gerichtetes Blech- Epoxidharz-imprägniert, Für Hand- und Maschinenlayup GL-III-33-95 (203)) | 1 | chevron_right |
| SAE AMS 3912 SAE AMS 3912 (Radomes, Foam Sandwich Polyimide/Quartz Cloth Construction) | 1 | chevron_right |
| SAE AMS 3913 SAE AMS 3913 (Radom, Schaumstoff-Sandwich-Schmelzkleber, Polyimid vom Additionstyp) | 1 | chevron_right |
| SAE AMS 4000F SAE AMS 4000F (Aluminiumfeinblech und Grobblech (1060-O)) | 1 | chevron_right |
| SAE AMS 4001J SAE AMS 4001J (Aluminium Feinblech und Grobblech 0.12Cu (1100-0), geglüht) | 1 | chevron_right |
| SAE AMS 4002B SAE AMS 4002B (Rohre aus Aluminiumlegierung, Nahtlos, gezogen 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Lösungsgeglüht, entspannt durch Dehnung, und ausgelagert (2013-T6511)) | 1 | chevron_right |
| SAE AMS 4003H SAE AMS 4003H (Aluminiumlegierung, Feinblech und Grobblech, (1100-H14), kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4004E SAE AMS 4004E (Aluminiumlegierung, Metallfolie, 2.5Mg - 0.25Cr (5052-H191), kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4005D SAE AMS 4005D (Aluminiumlegierung, Metallfolie, 5.0Mg - 0.12Mn - 0.12Cr (5056-H191), kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4006K SAE AMS 4006K (Aluminiumlegierung, Feinblech und Grobblech, 1.25Mn - 0.12Cu (3003-0) geglüht) | 1 | chevron_right |
| SAE AMS 4007D SAE AMS 4007D (Folie aus Aluminiumlegierung 4,4Cu 1,5Mg 0,60Mn) | 1 | chevron_right |
| SAE AMS 4008K SAE AMS 4008K (Aluminiumlegierung, Feinblech und Grobblech, 1.25Mn - 0.12Cu (3003-H14), kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4009C SAE AMS 4009C (Folie aus Aluminiumlegierung 1.0Mg - 0.6Si - 0.30Cu - 0.20Cr (6061-O) Geglüht) | 1 | chevron_right |
| SAE AMS 4010C SAE AMS 4010C (Aluminiumlegierung, Metallfolie, 1.25Mn - 0.12Cu (3003-H18)) | 1 | chevron_right |
| SAE AMS 4011E SAE AMS 4011E (Aluminium, Metallfolie und Dünnblech, 99.45Al (1145-0), geglüht) | 1 | chevron_right |
| SAE AMS 4015N SAE AMS 4015N (Aluminiumlegierung, Feinblech und Grobblech, 2.5Mg - 0.25Cr (5052-O), geglüht) | 1 | chevron_right |
| SAE AMS 4016N SAE AMS 4016N (Aluminiumlegierung, Feinblech und Grobblech, 2.5Mg - 0.25Cr (5052-H32), kaltgehärtet, 1/4 hart, stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4017M SAE AMS 4017M (Aluminiumlegierung, Feinblech und Grobblech, 2.5Mg - 0.25Cr (5052-H34), kaltgehärtet, 1/2 hart, stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4021H SAE AMS 4021H (Aluminiumlegierung, Alclad, Feinblech und Grobblech, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061-0), geglüht) | 1 | chevron_right |
| SAE AMS 4022F SAE AMS 4022F (Feinblech und Grobblech aus Aluminiumlegierung, Alclad, 1.0mg 0.60Si 0.28Cu 0.20Cr) | 1 | chevron_right |
| SAE AMS 4023F SAE AMS 4023F (Aluminiumlegierung, Alclad, Feinblech und Grobblech, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061; -T6 Feinblech, -T651 Grobblech)) | 1 | chevron_right |
| SAE AMS 4025P SAE AMS 4025P (Feinblech und Grobblech aus Aluminiumlegierung 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) geglüht) | 1 | chevron_right |
| SAE AMS 4026N SAE AMS 4026N (Aluminiumlegierung, Feinblech und Grobblech, 1.0Mg- 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Feinblech, -T451 Grobblech), lösungsgeglüht und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4027P SAE AMS 4027P (Aluminiumlegierung, Feinblech und Grobblech, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Feinblech, -T651 Grobblech), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4028J SAE AMS 4028J (Feinblech und Grobblech aus Aluminiumlegierung 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-O) geglüht) | 1 | chevron_right |
| SAE AMS 4029M SAE AMS 4029M (Aluminiumlegierung, Feinblech und Grobblech, (2014; -T6 Feinblech, -T651 Grobblech), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4031K SAE AMS 4031K (Aluminiumlegierung, Bleche und Grobbleche 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Gelüht oder wenn angegeben, "im Herstellungszustand" (2219-F)) | 1 | chevron_right |
| SAE AMS 4035N SAE AMS 4035N (Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed; or when specified, “As Fabricated” (2024-F)) | 1 | chevron_right |
| SAE AMS 4036L SAE AMS 4036L (Aluminiumlegierung, Feinbelch und Grobblech, einseitig alcladbeschichtet 4.4Cu - 1.5Mg - 0.60Mn, einseitig alcladbeschichtet 2024, 1-1/2% einseitig alcladbeschichtet 2024-T3 Feinblech, 1-1/2% einseitig alcladbeschichtet 2024-T351 Grobblech) | 1 | chevron_right |
| SAE AMS 4037R SAE AMS 4037R (Aluminiumlegierung, Feinblech und Grobblech, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 flaches Blech, -T351 Grobblech), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4040R SAE AMS 4040R (Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 - 1/2% Alclad) Annealed) | 1 | chevron_right |
| SAE AMS 4041U SAE AMS 4041U (Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1-1/2% Alclad) Solution Heat Treated, Cold Worked and Naturally Aged) | 1 | chevron_right |
| SAE AMS 4044P SAE AMS 4044P (Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or when specified, ʺAs Fabricatedʺ (7075-F)) | 1 | chevron_right |
| SAE AMS 4045M SAE AMS 4045M (Aluminiumlegierung, Feinblech und Grobblech, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Feinblech, -T651 Grobblech), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4046G SAE AMS 4046G (Aluminiumlegierung, Feinblech und Grobblech, einseitig alcladbeschichtet, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad einseitig 7075; -T6 Feinblech, -T651 Grobblech), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4048R SAE AMS 4048R (Feinblech und Grobblech aus Aluminiumlegierung, Alclad 5.6Zn - 2,5 Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) geglüht oder wenn angegeben, "Im Herstellungszustand" (Alclad 7075-F)) | 1 | chevron_right |
| SAE AMS 4049N SAE AMS 4049N (Aluminiumlegierung, Feinblech und Grobblech, Alclad 5.6Zn - 2.5Mg - 1.6Cu -Grobblech), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4050K SAE AMS 4050K (Blech aus Aluminiumlegierung 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) lösungsgeglüht, spannungsarm geglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4051G SAE AMS 4051G (Blech aus Aluminiumlegierung 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) lösungsgeglüht, spannungsarm geglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4056J SAE AMS 4056J (Aluminiumlegierung, Feinblech und Grobblech, 4.4Mg - 0.70Mn - 0.15Cr (5083-O), geglüht) | 1 | chevron_right |
| SAE AMS 4057E SAE AMS 4057E (Aluminiumlegierung, Blech 4.4Mg-0.70Mn-0.15Cr (5083-H323)) | 1 | chevron_right |
| SAE AMS 4059F SAE AMS 4059F (Blech und Platte - 4.4Mg 0.70Mn 0.15Cr) | 1 | chevron_right |
| SAE AMS 4062J SAE AMS 4062J (Aluminiumlegierung, gezogenes, nahtloses, rundes Rohr, (1100-H14), kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4063G SAE AMS 4063G (Aluminiumlegierung, einseitig plattiert, Grobblech, 1.25Mn - 0.12Cu (No. 11-0 1.25Mn - 0.12Cu (No. 11-0 Lötblech)), geglüht) | 1 | chevron_right |
| SAE AMS 4064H SAE AMS 4064H (Aluminum Alloy, Clad Two Sides Sheet, 1.25Mn - 0.12Cu (No. 12-O Brazing Sheet), Annealed) | 1 | chevron_right |
| SAE AMS 4065K SAE AMS 4065K (Aluminiumlegierung, gezogenes, nahtloses Rohr, 1.2Mn - 0.12Cu (3003-0), geglüht) | 1 | chevron_right |
| SAE AMS 4066D SAE AMS 4066D (Aluminiumlegierung, gezogen, rundes, nahtloses Rohr, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219-T8511), lösungsgeglüht, spannungsarm durch Strecken, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4067J SAE AMS 4067J (Aluminiumlegierung, gezogenes, rundes, nahtloses Rohr, 1.25Mn - 0.12Cu (3003-H14), kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4068G SAE AMS 4068G (Aluminiumlegierung, gezogenes, rundes, nahtloses Rohr, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511), lösungsgeglüht, spannungsarm durch Strecken) | 1 | chevron_right |
| SAE AMS 4069G SAE AMS 4069G (Aluminiumlegierung, gezogen, Runde, nahtlose Rohre, enge Toleranz 2,5 Mg - 0.25Cr (5052-O) geglüht) | 1 | chevron_right |
| SAE AMS 4070P SAE AMS 4070P (Aluminiumlegierung, gezogen, Runde, nahtlose Rohre 2,5 Mg - 0.25Cr (5052-O) geglüht) | 1 | chevron_right |
| SAE AMS 4071P SAE AMS 4071P (Aluminiumlegierung, gezogenes, rundes, nahtloses, hydraulisches Rohr, 2,5Mg - 0,25Cr (5052-O), geglüht) | 1 | chevron_right |
| SAE AMS 4077J SAE AMS 4077J (Bleche und Platten aus Aluminiumlegierungen, einseitig plattiert 4.4Cu - 1.5Mg - 0.60Mn (einseitig plattiert 2024-O) geglüht) | 1 | chevron_right |
| SAE AMS 4078K SAE AMS 4078K (Aluminiumlegierung, Grobblech, (7075-T7351), lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4079J SAE AMS 4079J (Aluminiumlegierung, gezogenes, rundes, nahtloses Rohr, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O), enge Toleranzen, geglüht) | 1 | chevron_right |
| SAE AMS 4080R SAE AMS 4080R (Aluminiumlegierung, gezogene, nahtlose Rohre 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) geglüht) | 1 | chevron_right |
| SAE AMS 4081K SAE AMS 4081K (Aluminiumlegierung, hydraulisches Rohr, nahtlos, gezogen, rund, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), lösungsgeglüht und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4082S SAE AMS 4082S (Aluminiumlegierung, nahtloses, gezogenes Rohr, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4083N SAE AMS 4083N (Aluminiumlegierung, hydraulisches Rohr, nahtlos, gezogen, rund,1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4084E SAE AMS 4084E (Aluminiumlegierung, Feinblech, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4085G SAE AMS 4085G (Aluminiumlegierung, Feinblech, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), lösungsgeglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4086P SAE AMS 4086P (Aluminiumlegierung, gezogenes, rundes, nahtloses, hydraulisches Rohr, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3), lösungsgehlüht, kaltumgeformt und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4087K SAE AMS 4087K (Rohr aus Aluminiumlegierung, nahtlos, gezogen 4,4Cu - 1,5Mg - 0,60Mn (2024-O) geglüht) | 1 | chevron_right |
| SAE AMS 4088L SAE AMS 4088L (Aluminiumlegierung, gezogenes, nahtloses Rohr, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3), lösungsgeglüht und kaltumgeformt) | 1 | chevron_right |
| SAE AMS 4089G SAE AMS 4089G (Aluminum Alloy, Plate, 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4090H SAE AMS 4090H (Aluminum Alloy, Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4094E SAE AMS 4094E (Aluminiumlegierung, Fein- und Grobblech, Alclad, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Feinblech, lösungsgeglüht, kaltumgeformt, ausgehärtet, Alclad 2219-T851 Grobblech, lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4095F SAE AMS 4095F (Aluminum Alloy, Alclad Sheet and Plate, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti, Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked, Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved) | 1 | chevron_right |
| SAE AMS 4096E SAE AMS 4096E (Aluminiumlegierung, Fein- und Grobblech, Alclad 6.3Cu - 0.30Mn- 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-O), geglüht) | 1 | chevron_right |
| SAE AMS 4100G SAE AMS 4100G (Aluminiumlegierung, Alclad, Feinblech, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761), lösungsgelüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4101G SAE AMS 4101G (Aluminiumlegierung, Grobblech, 4.4Cu - 1.5Mg - 0.60Mn (2124-T851), lösungsgeglüht, gestreckt und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4102G SAE AMS 4102G (Stangen, Stäbe und Draht, gerollt oder kaltfertiggestellt, aus Aluminiumlegierung 99,0Al Herstellzustand) | 1 | chevron_right |
| SAE AMS 4107H SAE AMS 4107H (Aluminiumlegierung, gesenkgeschmiedet, (7050-T74), lösungsgeglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4108G SAE AMS 4108G (Aluminiumlegierung, freiformgeschmiedet, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452), lösungsgeglüht, spannungsarm durch Pressen, überaltert) | 1 | chevron_right |
| SAE AMS 4111F SAE AMS 4111F (Aluminiumlegierung, Schmiedestücke, 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4112C SAE AMS 4112C (Stangen, Stäbe und Draht aus Aluminiumlegierung, 4.4Cu - 11.5Mg - 0.6Mn (2024-T6) gerollt, gezogen oder kaltfertiggestellt) | 1 | chevron_right |
| SAE AMS 4113G SAE AMS 4113G (Aluminiumlegierung, extrudierte Profile, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4114J SAE AMS 4114J (Aluminiumlegierung, Stangen und Rundstäbe, gewalzt oder kaltumgeformt, 2.5Mg - 0.25Cr (5052-F), Herstellungszustand) | 1 | chevron_right |
| SAE AMS 4115K SAE AMS 4115K (Aluminiumlegierung, gerollt oder kalt veredelte, Stangen, Stäbe, Drähte und abbrennstumpfgeschweißte Ringe geglüht 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O)) | 1 | chevron_right |
| SAE AMS 4116K SAE AMS 4116K (Aluminiumlegierung, Stäbe, Stäbe und Draht 1,0 Mg - 0,60 Si - 0,30 Cu - 0,20 Cr (6061-T4) Kaltveredelt, lösungsgeglüht und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4117M SAE AMS 4117M (Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651)) | 1 | chevron_right |
| SAE AMS 4118M SAE AMS 4118M (Aluminiumlegierung, gewalzte oder kaltumgeformte Stangen, Rundstäbe, Draht, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4120T SAE AMS 4120T (Aluminum Alloy, Rolled or Cold-Finished Bars, Rods, and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024), Solution Heat Treated and Naturally Aged (T4), Solution Heat Treated, Cold Worked, and Naturally Aged (T351)) | 1 | chevron_right |
| SAE AMS 4121K SAE AMS 4121K (Stangen, Stäbe und Drähte aus Aluminiumlegierung gewalzt, gezogen oder kaltfertiggestellt 4.5Cu - 0.85Si - 0.80Mn - 0,50 Mg (2014-T6-T651) Lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4122N SAE AMS 4122N (Aluminiumlegierung, Stangen, Rundstäbe, Draht, gewalzt oder kaltumgeformt, Ringe, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4123L SAE AMS 4123L (Aluminiumlegierung, gewalzte oder kaltumgeformte Stangen und Rundstäbe, (7075-T651), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4124G SAE AMS 4124G (Aluminiumlegierung, gewalzte oder kaltumgeformte Stangen, Rundstäbe, Draht, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351), lösungsgeglüht,spannungsarm durch Strecken, überaltert) | 1 | chevron_right |
| SAE AMS 4125L SAE AMS 4125L (Aluminiumlegierung, Gesenkschmiedeteile, gewalzte und geschmiedete Ringe, 0.9Si - 0.62Mg - 0.25Cr (6151-T6), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4126E SAE AMS 4126E (Aluminiumlegierung, Gesenk- und Freiformschmiedeteile und gewalzte Ringe, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4127L SAE AMS 4127L (Aluminiumlegierung, Schmiedeteile und gewalzte oder geschmiedete Ringe, (6061-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4128F SAE AMS 4128F (Aluminiumlegierung Stäbe, gewalzte oder kaltumgeformt, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) lösungsgeglüht, spannungsarm durch Strecken) | 1 | chevron_right |
| SAE AMS 4130N SAE AMS 4130N (Aluminiumlegierung, gesenkgeschmiedet, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4131F SAE AMS 4131F (Aluminiumlegierung, Form- und Freihandschmiedestücke 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) lösungsgeglüht und ausgelagert) | 1 | chevron_right |
| SAE AMS 4132J SAE AMS 4132J (Aluminum Alloy, Die and Hand Forgings, and Rolled Rings, 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4133F SAE AMS 4133F (Aluminiumlegierung, Schmiedestücke und gewalzte Ringe, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4134H SAE AMS 4134H (Aluminiumlegierung, Gesenkschmiedeteile 4,4 Cu - 0,85 Si - 0,80 Mn - 0,50 mg (2014-T4) lösungsgeglüht und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4136A SAE AMS 4136A (Aluminiumlegierung, Schmiedestücke, 4.3Zn 3.3Mg 0.6Cu 0.2Mn 0.2Cr Lösungswärmebehandelt und Ausscheidungsgeglüht, niedrige Restspannungen) | 1 | chevron_right |
| SAE AMS 4138B SAE AMS 4138B (Aluminiumlegierung, Schmiedestücke, 4.3Zn - 3.3Mg - 0.60Cu - 0.20 Mn - 0.18Cr (7079-T6)) | 1 | chevron_right |
| SAE AMS 4139H SAE AMS 4139H (Aluminiumlegierung, Schmiedeteile, 5,6 Zn, 2,5 mg, 1,6 Cu, 0,25 Cr (7075-T6)) | 1 | chevron_right |
| SAE AMS 4140K SAE AMS 4140K (Aluminiumlegierung, gesenkgeschmiedet, 4.0Cu - 2.0Ni - 0.68Mg (2018-T61), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4141H SAE AMS 4141H (Formschmiedestücke aus Aluminiumlegierung 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Lösungswärmebehandelt und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4143G SAE AMS 4143G (Aluminiumlegierung, Schmiedestücke und gewalzte oder geschmiedete Ringe, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) lösungsgeglüht ausgehärtet) | 1 | chevron_right |
| SAE AMS 4144H SAE AMS 4144H (Aluminiumlegierung, freiformgeschmiedet, gewalzte Ringe, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), lösungsgeglüht, mechanisch spannungsarm und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4145 SAE AMS 4145 (Aluminiumlegierung, Schmiedestücke, 12,2Si-1,1Mg-0,9Cu-0,9Ni) | 1 | chevron_right |
| SAE AMS 4146H SAE AMS 4146H (Schmiedeteile aus Aluminiumlegierungen und gewalzte oder geschmiedete Ringe und Schmiedematerial 1,0 Mg - 0,60 Si - 0,28 Cu - 0,20 Cr (6061 - T4) Lösungsgeglüht und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4147F SAE AMS 4147F (Aluminiumlegierung, Schmiedestücke, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352), lösungsgeglüht, spannungsarm durch Kompression, überaltert) | 1 | chevron_right |
| SAE AMS 4148F SAE AMS 4148F (Aluminiumlegierung, gesenkgeschmiedet, (7175-T66) lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4149G SAE AMS 4149G (Aluminiumlegierung, Gesenk- und Freiformschmiedeteile, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4150P SAE AMS 4150P (Aluminiumlegierung, Extrusionen und Ringe, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4152P SAE AMS 4152P (Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked) | 1 | chevron_right |
| SAE AMS 4153N SAE AMS 4153N (Aluminiumlegierung, Extrusionen, 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4154R SAE AMS 4154R (Aluminiumlegierung, Extrusionen, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4156M SAE AMS 4156M (Aluminiumlegierung, Extrusionen, 0.68Mg - 0.40Si (6063-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4157F SAE AMS 4157F (Aluminiumlegierung, Extrusionen, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4159G SAE AMS 4159G (Aluminiumlegierung, Extrusionen, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511), lösungsgeglüht, spannungsarm, geglättet, überaltert) | 1 | chevron_right |
| SAE AMS 4160K SAE AMS 4160K (Aluminiumlegierung, Extrusionen 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Geglüht) | 1 | chevron_right |
| SAE AMS 4161K SAE AMS 4161K (Aluminiumlegierung, Extrusionen, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), lösungsgeglüht, natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4162G SAE AMS 4162G (Aluminiumlegierung, Extrusionen, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511), lösungsgeglüht, spannungsarm durch Strecken, geglättet,ausgehärtet) | 1 | chevron_right |
| SAE AMS 4163G SAE AMS 4163G (Aluminiumlegierung, Extrusionen, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511), lösungsgeglüht, spannungsarm durch Strecken, geglättet) | 1 | chevron_right |
| SAE AMS 4164K SAE AMS 4164K (Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Solution Heat Treated, Cold Worked, Stress-Relief by Stretching, Unstraightened) | 1 | chevron_right |
| SAE AMS 4165K SAE AMS 4165K (Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Cold worked, Stress-Relieved by Stretching, and Straightened) | 1 | chevron_right |
| SAE AMS 4166G SAE AMS 4166G (Aluminiumlegierung, Extrusionen, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73), lösungsgeglüht, überaltert) | 1 | chevron_right |
| SAE AMS 4167J SAE AMS 4167J (Aluminiumlegierung, Extrusionen, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511), lösungsgeglüht, spannungsarm durch Strecken, überaltert) | 1 | chevron_right |
| SAE AMS 4168K SAE AMS 4168K (Aluminiumlegierung, Extrusionen, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510), lösungswärmebehandelt, spannungsarm durch Dehnen, ausgehärtet, nicht geglättet) | 1 | chevron_right |
| SAE AMS 4169L SAE AMS 4169L (Aluminiumlegierung, Extrusionen, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511), lösungsgeglüht, spannungsarm durch Strecken, geglättet, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4171C SAE AMS 4171C (Aluminiumlegierung, Extrusionen, 4.3zn 3.3mg 0.60cu 0.20mn 0.18cr) | 1 | chevron_right |
| SAE AMS 4172H SAE AMS 4172H (Aluminiumlegierung, Extrusionen, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 oder T4510), lösungsgeglüht und spannungsarm durch Strecken) | 1 | chevron_right |
| SAE AMS 4173G SAE AMS 4173G (Aluminiumlegierung, Extrusionen, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) lösungsgeglüht, spannungsarm durch Strecken, geglättet, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4174F SAE AMS 4174F (Aluminum Alloy, Flash-Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4175C SAE AMS 4175C (Honigwabenkern, Aluminiumlegierung, für Sandwichkonstruktion, 5052, 350 (175)) | 60 | chevron_right |
| SAE AMS 4176C SAE AMS 4176C (Honigwabenkern, Aluminiumlegierung, für Sandwichkonstruktion, 5056, 350 (175)) | 60 | chevron_right |
| SAE AMS 4177F SAE AMS 4177F (Core, Flexible Honeycomb, Aluminum Alloy, For Sandwich Construction, 5056, 350 Fahrenheit (177 Celsius)) | 12 | chevron_right |
| SAE AMS 4178 SAE AMS 4178 (Biegsame Wabenkernstruktur, Aluminiumlegierung, behandelt für Sandwichkonstruktion 5052, 350 (177)) | 32 | chevron_right |
| SAE AMS 4179D SAE AMS 4179D (Aluminiumlegierung, Schmiedestücke, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452), lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4180G SAE AMS 4180G (Aluminiumdraht, 99.0Al Minimum (1100-H18)) | 1 | chevron_right |
| SAE AMS 4181C SAE AMS 4181C (Aluminiumlegierung, Schweißdraht 7.0Si - 0.38Mg - 0.10Ti (4008 or 356)) | 1 | chevron_right |
| SAE AMS 4182J SAE AMS 4182J (Aluminiumlegierung, Draht 5,0 Mg - 0,12 Mn - 0,12 Cr (5056-O) geglüht) | 1 | chevron_right |
| SAE AMS 4183B SAE AMS 4183B (Aluminiumlegierung, extrudierte Profile, (2027-T3511) 4.4Cu – 1.2Mg - 0.8Mn – 0.10Zr, lösungsgeglüht, spannungsarm durch Strecken) | 1 | chevron_right |
| SAE AMS 4184G SAE AMS 4184G (Füllmetall, Löten mit Aluminium, 10Si - 4.0Cu (4145)) | 1 | chevron_right |
| SAE AMS 4185G SAE AMS 4185G (Filler Metal, Aluminum Brazing, 12Si) | 1 | chevron_right |
| SAE AMS 4186F SAE AMS 4186F (Aluminiumlegierung, Stangen, Rundstäbe, Draht, gewalzt oder kalt umgeformt, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F), Herstellungszustand) | 1 | chevron_right |
| SAE AMS 4187C SAE AMS 4187C (Stangen, und Stäbe, gewalzt, gezogen oder kalt veredelt 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr geglüht) | 1 | chevron_right |
| SAE AMS 4189J SAE AMS 4189J (Aluminiumlegierung, Schweißdraht 4.1Si -0.20 Mg (4643)) | 1 | chevron_right |
| SAE AMS 4190L SAE AMS 4190L (Aluminiumlegierung, Schweißdraht 5.2Si (4043)) | 1 | chevron_right |
| SAE AMS 4191K SAE AMS 4191K (Aluminiumlegierung, Schweißdraht, 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)) | 1 | chevron_right |
| SAE AMS 4193E SAE AMS 4193E (Aluminiumlegierung, Fein- und Grobblech, 4.4Cu - 1.5Mg - 0.60Mn (2024-T861), lösungsgeglüht, kaltumgeformt, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4194F SAE AMS 4194F (Aluminiumlegierung, Fein- und Grobblech, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T361 flaches Blech; 1-1/2% Alclad 2024-T361 Grobblech), lösungsgeglüht, kaltumgeformt) | 1 | chevron_right |
| SAE AMS 4195D SAE AMS 4195D (Aluminiumlegierung, Fein- und Grobblech, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 und 1-1/2% Alclad 2024-T861 flaches Blech; 1-1/2% Alclad 2024-T861 Grobblech), lösungsgeglüht, kaltumgeformt und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4200C SAE AMS 4200C (Aluminiumlegierung, Grobblech, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7351), lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4201H SAE AMS 4201H (Aluminum Alloy Plate, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4202F SAE AMS 4202F (Aluminum Alloy Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4203D SAE AMS 4203D (Aluminiumlegierung, Grobblech, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7351) lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4204E SAE AMS 4204E (Aluminiumlegierung, Grobblech, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651), lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4205F SAE AMS 4205F (Aluminiumlegierung, Grobblech, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7451), lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4206D SAE AMS 4206D (Aluminiumlegierung, Grobblech, (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, lösungsgeglüht, spannungsarm und überaltert) | 1 | chevron_right |
| SAE AMS 4207D SAE AMS 4207D (Aluminiumlegierung, Feinblech, Alclad, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4208D SAE AMS 4208D (Aluminiumlegierung, Feinblech, 6.0Cu - 0.40Zr (2004-F), Walzzustand) | 1 | chevron_right |
| SAE AMS 4209D SAE AMS 4209D (Aluminiumlegierungsblech, Alclad; 6,0 Cu – 0,40 Zr – (2004-F); Wie gerollt) | 1 | chevron_right |
| SAE AMS 4210M SAE AMS 4210M (Aluminiumlegierung, Guss, 5.0Si - 1.2Cu - 0.50Mg (355.0-T51), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4211D SAE AMS 4211D (Aluminiumlegierung, Grobblech, 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4212M SAE AMS 4212M (Aluminum Alloy Castings, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4213B SAE AMS 4213B (Aluminiumlegierung, Grobblech, (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr, lösungsgeglüht, kaltumgeformt und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4214L SAE AMS 4214L (Guss, Aluminiumlegierung, Sandgussteile, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71), lösungsgeglüht, überaltert) | 1 | chevron_right |
| SAE AMS 4215L SAE AMS 4215L (Aluminiumlegierung, Guss, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4216C SAE AMS 4216C (Aluminiumlegierung, Feinblech, 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6), lösungsgeglüht, künstlich gealtert) | 1 | chevron_right |
| SAE AMS 4217K SAE AMS 4217K (Aluminiumlegierung, Guss, 7.0Si - 0.32Mg (356.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4218J SAE AMS 4218J (Gussteile aus Aluminiumlegierung 7,0Si - 0,35 Mg (A356.0-T6) (ehemals T6P Werkstoffzustand) Lösungsbehandelt und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4219F SAE AMS 4219F (Aluminiumlegierung, Guss, 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T61P), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4220E SAE AMS 4220E (Gussteile aus Aluminiumlegierung, Sand 4cu - 2ni - 1.5mg - 0.2cr(A142-T75)) | 1 | chevron_right |
| SAE AMS 4221F SAE AMS 4221F (Aluminiumlegierung, Grobblech, 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151), lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4222H SAE AMS 4222H (Aluminiumlegierung, Guss, Sandgussteile, mäßig hitzebeständig, 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P), lösungsgeglüht, stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4223F SAE AMS 4223F (Aluminiumlegierung, Guss, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4), lösungsgeglüht, natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4224C SAE AMS 4224C (Aluminiumlegierung, Guss, Sandgussteile, 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0), stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4225E SAE AMS 4225E (Aluminiumlegierung, Hitzeresistent, Güsse 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4226B SAE AMS 4226B (Aluminiumlegierung, Guss, hochfest, 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0), lösungsgeglüht, ausgehärtet (überaltert)) | 1 | chevron_right |
| SAE AMS 4227E SAE AMS 4227E (Aluminiumlegierung, Guss, Sandgussteile, 8.0Cu 6.0Mg 0.50Mn 0.50Ni, Gussform) | 1 | chevron_right |
| SAE AMS 4229H SAE AMS 4229H (Aluminiumlegierung, Guss, hochfest, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7), lösungsgeglüht, überaltert) | 1 | chevron_right |
| SAE AMS 4230D SAE AMS 4230D (Gussteile aus Aluminiumlegierung, Sand 4.5Cu (195-T4)) | 1 | chevron_right |
| SAE AMS 4231G SAE AMS 4231G (Guss, Sandgussteile, 4.5Cu - 1.1Si, lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4232E SAE AMS 4232E (Aluminiumlegierung, Extrusionen, 2.7Cu - 2.2Li - 0.12Zr (2090-T86), lösungsgeglüht, kaltumgeformt, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4233C SAE AMS 4233C (Aluminiumlegierung, Schweißdraht, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201)) | 1 | chevron_right |
| SAE AMS 4235D SAE AMS 4235D (Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T7), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4236E SAE AMS 4236E (Aluminum Alloy Castings, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4), Solution Heat Treated and Naturally Aged) | 1 | chevron_right |
| SAE AMS 4237B SAE AMS 4237B (Aluminiumlegierung, Guss, Sandgussteile, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71), lösungsgeglüht, natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4238E SAE AMS 4238E (Aluminiumlegierung, Guss, Sandgussteile, 6.8Mg - 0.18Ti - 0.18Mn (535.0-F), Gusszustand) | 1 | chevron_right |
| SAE AMS 4239D SAE AMS 4239D (Aluminiumlegierung, Guss, Sandgussteile, 6.8Mg - 0.18Ti - 0.18Mn (535.0-0), geglüht) | 1 | chevron_right |
| SAE AMS 4240G SAE AMS 4240G (Guss Sandgussteile, 10Mg, lösungsgeglüht und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4241F SAE AMS 4241F (Aluminiumlegierung, Guss, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), lösungsgeglüht, ausgehärtet, Kontrolle bzgl. Dendritenarmabstand (DAS)) | 1 | chevron_right |
| SAE AMS 4242D SAE AMS 4242D (Aluminiumlegierung, Guss, 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7), lösungsgeglüht, überaltert) | 1 | chevron_right |
| SAE AMS 4243D SAE AMS 4243D (Aluminum Alloy, Alclad Sheet, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76), Solution Heat Treated and Overaged) | 1 | chevron_right |
| SAE AMS 4244D SAE AMS 4244D (Aluminiumlegierung, Schweißdraht, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti, zum Schweißen A206.0 -Typ Legierungen) | 1 | chevron_right |
| SAE AMS 4245G SAE AMS 4245G (Aluminum Alloy, Welding Wire 5.0Si – 1.2Cu – 0.50Mg (C355.0)) | 1 | chevron_right |
| SAE AMS 4246G SAE AMS 4246G (Aluminum Alloy, Welding Wire, 7.0Si - 0.52Mg (357)) | 1 | chevron_right |
| SAE AMS 4247D SAE AMS 4247D (Aluminiumlegierung, Freiformschmiedestücke 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Lösungsgeglüht, entspannt durch Kompression und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4248D SAE AMS 4248D (Freiformschmiedestücke und Gewalzte Ringe aus Aluminiumlegierung 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Lösungsgeglüht, entspannt durch Kompression und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4249B SAE AMS 4249B (Aluminiumlegierung,Guss, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), lösungsgeglüht, ausgehärtet, (bedarf Dauertests und Bruchzähigkeitstests)) | 1 | chevron_right |
| SAE AMS 4250C SAE AMS 4250C (Aluminiumlegierung, Grobblech, 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651), lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4251D SAE AMS 4251D (Aluminiumlegierung, Feinblech, 2.7Cu - 2.2Li - 0.12Zr (2090-T83), lösungsgeglüht, kaltumgeformt, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4252C SAE AMS 4252C (Aluminiumlegierung, Grobblech, 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751), lösungsgeglüht, spannungsfrei und überaltert) | 1 | chevron_right |
| SAE AMS 4254C SAE AMS 4254C (Aluminiumlegierung, Aramidfaserverstärkt, Laminierte Blech, 4.4Cu - 1.5Mg - 0.6Mn (2024-T3), 3, 5, 7, or 9 Ply) | 1 | chevron_right |
| SAE AMS 4255E SAE AMS 4255E (Aluminiumlegierung, einseitig beschichtet, Feinblech 0.6Mg - 0.35Si - 0.28Cu (No. 21 Löt - Feinblech), Herstellungszustand) | 1 | chevron_right |
| SAE AMS 4256D SAE AMS 4256D (Aluminiumlegierung, zweiseitig beschichtet,Feinblech, 0.6Mg - 0.35Si - 0.28Cu (No. 22 Löt - Feinblech), Herstellungszustand) | 1 | chevron_right |
| SAE AMS 4257A SAE AMS 4257A (Aluminum Alloy, Extrusion, 3.7Cu - 1.15Li - 0.5Zn - 0.45Ag - 0.4Mg - 0.3Mn - 0.1Zr (2055-T84) Solution Heat Treated, Stress Relieved by Stretching 2% to 5% and Aged) | 1 | chevron_right |
| SAE AMS 4259B SAE AMS 4259B (Aluminiumlegierung, Feinblech, 2.4Li - 1.3Cu - 0.95Mg - 0.10Zr (8090-T6), lösungsgeglüht, ausgehärtet (nicht rekristallisiert)) | 1 | chevron_right |
| SAE AMS 4260H SAE AMS 4260H (Aluminiumlegierung, Investment-Feinguss, 7.0Si - 0.32Mg (356.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4261H SAE AMS 4261H (Aluminiumlegierung, Guss, Investment-Feinguss, 7.0Si - 0.32Mg (356.0-T51), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4264A SAE AMS 4264A (Bronze, Aluminium Silizium, Stäbe, Stangen und Schmiedestücke, 90Cu - 7.0Al-1.8Si gezogen und spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 4265A SAE AMS 4265A (Aluminiumlegierung - Partikelverstärkte Extrusionen 6092/SiC/25P-T6P lösungsgeglüht, abgeschreckt und ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4266B SAE AMS 4266B (Aluminiumlegierung, Feinblech, 6.5Fe - 1.3Si - 0.60V (8022-H112), Produkt der Pulvermetallurgie, kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4267A SAE AMS 4267A (Aluminiumlegierung, Feinblech, (7055-O) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, geglüht) | 1 | chevron_right |
| SAE AMS 4268B SAE AMS 4268B (Aluminum Alloy, Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn; (2024-T81 Sheet, -T851 Plate), Solution Heat Treated, Cold Worked and Artificially Aged) | 1 | chevron_right |
| SAE AMS 4269B SAE AMS 4269B (Aluminiumlegierung, Blech und Platte, 4.4Cu - 1.5Mg - 0.60Mn (2024-T361), lösungsgeglüht und kalt bearbeitet) | 1 | chevron_right |
| SAE AMS 4270C SAE AMS 4270C (Aluminiumlegierung, Alclad, flaches Feinblech, 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3), lösungsgeglüht, kaltumgeformt) | 1 | chevron_right |
| SAE AMS 4271A SAE AMS 4271A (Aluminiumlegierung, Blech und Platte, 4.4Cu - 1.5Mg - 0.60Mn (2024-T861), lösungsgeglüht und kalt bearbeitet und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4272A SAE AMS 4272A (Aluminiumlegierung, Alclad-Blech und -Platte (Alclad 2029-T8) 3,6 Cu – 0,30 Mn – 0,95 Mg – 0,40 Ag – 0,12 Zr Lösungsgeglüht, kaltverformt und gealtert) | 1 | chevron_right |
| SAE AMS 4273D SAE AMS 4273D (Aluminiumlegierung, Blech und Grobblech, (2424-T3 flaches Blech und 2424-T351 Grobblech), lösungsgeglüht und kalt bearbeitet) | 1 | chevron_right |
| SAE AMS 4274C SAE AMS 4274C (Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O) Annealed, Fine Grain) | 1 | chevron_right |
| SAE AMS 4275E SAE AMS 4275E (Gussteile, Kokille 6.2Sn - 1Cu - 1Ni spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 4276C SAE AMS 4276C (Aluminiumlegierung, Feinblech, 4.4Cu - 1.5Mg - 0.60Mn (2024-O), geglüht, feinkörnig) | 1 | chevron_right |
| SAE AMS 4277C SAE AMS 4277C (Aluminiumlegierung, Feinblech, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O), geglüht, feinkörnig) | 1 | chevron_right |
| SAE AMS 4278C SAE AMS 4278C (Aluminiumlegierung, Alclad, Feinblech, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O), geglüht, feinkörnig) | 1 | chevron_right |
| SAE AMS 4279C SAE AMS 4279C (Aluminiumlegierung, Alclad, Feinblech, 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 flaches Feinblech), lösungsgeglüht, hohe Umformbarkeit) | 1 | chevron_right |
| SAE AMS 4280K SAE AMS 4280K (Aluminiumlegierung, Guss, Dauerform, 5.0Si - 1.2Cu - 0.5Mg (355.0-T71), lösungsgeglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4281H SAE AMS 4281H (Aluminiumlegierung, Guss, Dauerform, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4284L SAE AMS 4284L (Aluminiumlegierung, Guss, Dauerform, 7.0Si - 0.30Mg (356.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4285G SAE AMS 4285G (Aluminiumlegierung , Schleuderguss, 7.0Si - 0.30Mg (356.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4286F SAE AMS 4286F (Aluminiumlegierung, Guss, Dauerform, 7.0Si - 0.32Mg (356.0-T51), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4287C SAE AMS 4287C (Aluminum Alloy, Extrusion, 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1 to 4% and Aged) | 1 | chevron_right |
| SAE AMS 4288 SAE AMS 4288 (Aluminiumlegierung, Guss, 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4289A SAE AMS 4289A (Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4290N SAE AMS 4290N (Aluminiumlegierung, Spritzguss, 9.5Si - 0.50Mg (360.0-F) (siehe AS1990), Gusszustand) | 1 | chevron_right |
| SAE AMS 4291K SAE AMS 4291K (Aluminiumlegierung, Spritzguss, 8.5Si - 3.5Cu (A380.0-F) (siehe AS1990), Gusszustand) | 1 | chevron_right |
| SAE AMS 4293B SAE AMS 4293B (Aluminiumlegierung, Extrusionen, 7.9Zn-1.6Cu-2.2Mg-0.16Cr (7249-T76511), lösungsgeglüht, spannungsarm, geglättet und überaltert) | 1 | chevron_right |
| SAE AMS 4294A SAE AMS 4294A (Aluminiumlegierung, Extrusionen, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T5511), Druck-Wärme-behandelt, spannungsarm durch Strecken, geglättet und künstlich gealtert) | 1 | chevron_right |
| SAE AMS 4295D SAE AMS 4295D (Aluminiumlegierung, Feinblech and Grobblech, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87) (Zusammensetzung)) | 1 | chevron_right |
| SAE AMS 4296D SAE AMS 4296D (Aluminiumlegierung, Alclad, Feinblech und Grobblech, 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3), lösungsgeglüht, kaltumgeformt) | 1 | chevron_right |
| SAE AMS 4297C SAE AMS 4297C (Aluminiumlegierung, Feinblech, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 flaches Feinblech), lösungsgeglüht, hohe Umformbarkeit) | 1 | chevron_right |
| SAE AMS 4298B SAE AMS 4298B (Aluminiumlegierung, Alclad, Feinblech, 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3), lösungsgeglüht, kaltumgeformt) | 1 | chevron_right |
| SAE AMS 4299B SAE AMS 4299B (Aluminiumlegierung, Grobblech, (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4300D SAE AMS 4300D (Blech aus Bor-Aluminium-Verbund 50 v/o 5.6B, 6061-O, für Diffusionsschweißen) | 1 | chevron_right |
| SAE AMS 4302C SAE AMS 4302C (Aluminiumlegierung, laminiertes Blech, Aramidfaserverstärkt, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), 3, 5, 7, oder 9 Ply) | 1 | chevron_right |
| SAE AMS 4303C SAE AMS 4303C (Aluminiumlegierung, Grobblech, 2.7Cu - 2.2Li - 0.12Zr (2090-T81), lösungsgeglüht, kaltumgeformt und gealtert) | 1 | chevron_right |
| SAE AMS 4304C SAE AMS 4304C (Aluminiumlegierung, diskontinuierlich verstärkt, Feinblech, 2009/SiC/15w (T8P), lösungsgeglüht, gezogen und ausgehärtet) | 1 | chevron_right |
| SAE AMS 4305A SAE AMS 4305A (Aluminiumlegierung, extrudierte Profile, (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr, lösungsgeglüht, spannungsarm und überaltert) | 1 | chevron_right |
| SAE AMS 4306C SAE AMS 4306C (Aluminiumlegierung, Grobblech, 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151), lösungsgeglüht, spannungsarm, gealtert) | 1 | chevron_right |
| SAE AMS 4307C SAE AMS 4307C (Aluminiumlegierung, Extrusionen, 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T61511,) lösungsgeglüht, spannungsarm durch Strecken, geglättet, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4308B SAE AMS 4308B (Aluminiumlegierung, Feinblech, 8.6Fe - 1.8Si - 1.3V (8009-H112), Produkt der Pulvermetallurgie, kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4309B SAE AMS 4309B (Aluminium, Extrusionen, 8.6Fe - 1.8Si - 1.3V (8009-H112), Produkt der Pulvermetallurgie, kaltgehärtet) | 1 | chevron_right |
| SAE AMS 4310G SAE AMS 4310G (Aluminiumlegierung, gewalzte oder geschmiedete Ringe, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) lösungsgeglüht, mechanisch spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4311F SAE AMS 4311F (Aluminiumlegierung, gewalzte oder geschmiedete Ringe, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352), lösungsgeglüht, mechanisch spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4312E SAE AMS 4312E (Aluminiumlegierung, gewalzte oder geschmiedete Ringe, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652), lösungsgeglüht, mechanisch spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4313F SAE AMS 4313F (Aluminiumlegierung, gewalzte oder geschmiedete Ringe, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352), lösungsgeglüht, mechanisch spannungsarm) | 1 | chevron_right |
| SAE AMS 4314E SAE AMS 4314E (Aluminiumlegierung, gewalzte oder geschmiedete Ringe, 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652), lösungsgeglüht, mechanisch spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4315B SAE AMS 4315B (Aluminiumlegierung, Feinblech und Grobblech, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T76 Feinblech, -T7651 Grobblech), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4316C SAE AMS 4316C (Aluminum Alloy, Alclad Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075; -T76 Sheet, -T7651 Plate), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4317C SAE AMS 4317C (Aluminum Alloy, Extruded Bar, Rod, and Shapes 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T76(51X)) Solution Heat Treated and Overaged) | 1 | chevron_right |
| SAE AMS 4318A SAE AMS 4318A (Aluminiumlegierung, gewalzte oder kaltgeformte Stangen und Rundstäbe, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86), lösungsgeglüht, kaltumgeformt und künstlich gealtert) | 1 | chevron_right |
| SAE AMS 4319D SAE AMS 4319D (Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress-Relieved, Artificially Aged) | 1 | chevron_right |
| SAE AMS 4320C SAE AMS 4320C (Schmiedestücke aus Aluminiumlegierung 7.7Zn – 2.5Mg – 1.5Cu – 0.16Cr (7149-T73) Lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4321B SAE AMS 4321B (Aluminiumlegierung Schmiedeteile 7.7Zn - 2,5 Mg - 1.5Cu - 0.16Cr (7049 - 01) Hochtemperaturgeglüht) | 1 | chevron_right |
| SAE AMS 4322A SAE AMS 4322A (Aluminiumlegierung, Gesenkschmiedeteile, 4.0Mg - 1.3Li - 1.2C - 0.45O (AL-905XL), mechanisch legiert, Herstellungszustand) | 1 | chevron_right |
| SAE AMS 4323E SAE AMS 4323E (Aluminiumlegierung, Freihandschmiedestücke 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) lösungsgeglüht, spannungsarm geglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4324C SAE AMS 4324C (Aluminum Alloy, Extruded Rod, Bar and Profiles, 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr (7055-T74511), Solution Heat Treated, Stress-Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4325B SAE AMS 4325B (Aluminiumlegierung, extrudierter Draht, Panelprofile, (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr , lösungsgeglüht, spannungsarm, geglättet und überaltert) | 1 | chevron_right |
| SAE AMS 4326B SAE AMS 4326B (Aluminiumlegierung, 2013, extrudierte Stangen, Runstäbe und Profile, 1.0 Mg - 0.80 Si - 1.8 Cu - 0.20 Cr (2013 -T6511), lösungsgeglüht, spannungsarm durch Strecken, gealtert) | 1 | chevron_right |
| SAE AMS 4327B SAE AMS 4327B (Aluminiumlegierung, Grobblech ,(2098-O) 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr, geglüht) | 1 | chevron_right |
| SAE AMS 4328C SAE AMS 4328C (Aluminum Alloy, Plate (2397-T87), 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn, Solution Heat Treated, Cold Worked, and Artificially Aged) | 1 | chevron_right |
| SAE AMS 4329C SAE AMS 4329C (Aluminiumlegierung, Grobblech, (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4330E SAE AMS 4330E (Aluminiumlegierung, Grobblech (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr, lösungsgeglüht, gestreckt und künstlich gealtert) | 1 | chevron_right |
| SAE AMS 4331B SAE AMS 4331B (Aluminiumlegierung, Extrusionen, 7.8Zn - 2.6Mg - 2.0Cu - 0.10Zr - (7068-T6511), lösungsgeglüht, spannungsarm, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4332B SAE AMS 4332B (Aluminiumlegierung, extrudierte Profile, (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4333E SAE AMS 4333E (Aluminiumlegierung, Formschmiedestücke 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) lösungsgeglüht, entspannt durch Kompression und überaltert) | 1 | chevron_right |
| SAE AMS 4334B SAE AMS 4334B (Aluminium-Legierung, Schmiedestücke 7.8Zn - 2,2 Mg - 1.6Cu - 0.15Cr (7249-T74 und -T7452)) | 1 | chevron_right |
| SAE AMS 4336D SAE AMS 4336D (Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Solution Heat Treated, Stress-Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4337C SAE AMS 4337C (Aluminiumlegierung, extrudierte Profile, (7055-T77511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4338C SAE AMS 4338C (Aluminiumlegierung, Extrusionen, 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511), lösungsgeglüht, spannungsarm durch Strecken) | 1 | chevron_right |
| SAE AMS 4339C SAE AMS 4339C (Aluminiumlegierung, gewalzte und kaltgeformte Stangen und Rundstäbe, 4.4Cu - 1.5Mg - 0.60Mn (2024-T851), lösungsgeglüht, kaltumgeformt, künstlich gealtert) | 1 | chevron_right |
| SAE AMS 4340H SAE AMS 4340H (Aluminiumlegierung, Extrusionen, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511), lösungsgeglüht, spannungsarm, geglättet, überaltert) | 1 | chevron_right |
| SAE AMS 4341H SAE AMS 4341H (Aluminiumlegierung, Extrusionen, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511), lösungsgeglüht, spannungsarm durch Strecken, geglättet, überaltert) | 1 | chevron_right |
| SAE AMS 4342G SAE AMS 4342G (Aluminiumlegierung, Extrusionen, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511), lösungsgeglüht, spannungsarm, geglättet, überaltert) | 1 | chevron_right |
| SAE AMS 4343G SAE AMS 4343G (Aluminiumlegierung, Extrusionen, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511), lösungsgeglüht, spannungsarm durch Strecken, überaltert) | 1 | chevron_right |
| SAE AMS 4344G SAE AMS 4344G (Aluminiumlegierung, Extrusionen, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511), lösungsgeglüht, spannungsarm durch Strecken, geglättet, überaltert) | 1 | chevron_right |
| SAE AMS 4345C SAE AMS 4345C (Aluminiumlegierung, Extrusionen, 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T77511), lösungsgeglüht, spannungsarm, geglättet, überaltert) | 1 | chevron_right |
| SAE AMS 4347F SAE AMS 4347F (Aluminiumlegierung, Feinblech, 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4), lösungsgeglüht, natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4348E SAE AMS 4348E (Kern, Honigwabe, Aluminiumlegierung, gehemmte Korrosion, Für Sandwichkonstruktion, 5052, 350 (177)) | 60 | chevron_right |
| SAE AMS 4349E SAE AMS 4349E (Kern, Honigwabe, Aluminiumlegierung, gehemmte Korrosion, Für Sandwichkonstruktion, 5056, 350 Fahrenheit (177 Celsius)) | 60 | chevron_right |
| SAE AMS 4350N SAE AMS 4350N (Magnesiumlegierung, Extrusionen, 6.5A1 - 0.95Zn (AZ61A-F), wie extrudiert) | 1 | chevron_right |
| SAE AMS 4351B SAE AMS 4351B (Aluminum Alloy, Plate (7065-T7651), 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr, Solution Heat Treated, Stress-Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4352K SAE AMS 4352K (Magnesiumlegierung, Extrusionen, 5.5Zn - 0.45Zr (ZK60A - T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4353A SAE AMS 4353A (Aluminiumlegierung, stranggepresste runde Stange 3.5Cu - 1.0Li - 0.40Mg - 0.45Ag - 0.12Zr (2050-T84) lösungsgeglüht, entspannt durch strecken und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4354B SAE AMS 4354B (Aluminiumlegierung, Grobblech, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) lösungsgeglüht, spannungsarm geglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4356A SAE AMS 4356A (Nahtlose gezogene Rundrohre aus Aluminiumlegierung; 2,3 Cu – 8,0 Zn – 2,0 Mg – 0,16 Zr (7155-T76); Lösungsgeglüht und gealtert) | 1 | chevron_right |
| SAE AMS 4357A SAE AMS 4357A (Aluminiumlegierung, Gesenkschmiedeteile 3.5Cu - 1.0Li - 0.04Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T852) lösungsgeglüht, Kalt bearbeitet und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4359A SAE AMS 4359A (Aluminiumlegierung, Stranggepresste Profile (2395-T84) 3.95Cu - 1.15Li - 0.3Ag - 0.5Mg - 0.1Zr - lösungsgeglüht, entspannt durch strecken und ausgelagert) | 1 | chevron_right |
| SAE AMS 4360E SAE AMS 4360E (Schmiedestücke aus Magnesiumlegierung, 8.5al 0.50zn) | 1 | chevron_right |
| SAE AMS 4361B SAE AMS 4361B (Aluminum Alloy, Plate (7065-T7451), 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr, Solution Heat Treated, Stress-Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4362H SAE AMS 4362H (Schmiedestücke, Magnesiumlegierung, 5.5Zn - 0.45Zr (ZK60A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4363G SAE AMS 4363G (Schmiedestücke, Magnesiumlegierung, 2.0Th - 0.78Mn (HM21A - T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4364A SAE AMS 4364A (Aluminiumlegierung, Grobblech, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) lösungsgeglüht, spannungsarm geglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4365A SAE AMS 4365A (Aluminiumlegierung, Grobblech, 7.9Zn – 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) lösungsgeglüht, spannungsarm geglüht und überaltert) | 1 | chevron_right |
| SAE AMS 4366B SAE AMS 4366B (Aluminiumlegierung, Stranggepresste Profile (2065-T84) 4.2Cu - 1.2Li – 0.52Mg – 0.32Mn – 0.32Ag - 0.1Zr lösungsgeglüht, entspannt durch strecken und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4367A SAE AMS 4367A (Aluminiumlegierung, Strangpressprofile 8,9Zn - 2,2Cu - 2,2Mg - 0,15Zr (7136-T74511) lösungsgeglüht, durch Strecken spannungsarm geglüht, gerichtet und überaltert) | 1 | chevron_right |
| SAE AMS 4368A SAE AMS 4368A (Aluminiumlegierung, diskontinuierlich verstärkte, heißisostatisch gepresste Formen 6061B/SiC/40p (3μm) (T1P)) | 2 | chevron_right |
| SAE AMS 4369A SAE AMS 4369A (Aluminiumlegierung, diskontinuierlich verstärkte extrudierte Stäbe, Stangen, Draht und Formen (2124A / SiC / 25p (0,7 μm) (T1P)) | 1 | chevron_right |
| SAE AMS 4371C SAE AMS 4371C (Magnesiumlegierung, Platte 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4372B SAE AMS 4372B (Aluminiumlegierung, Grobblech, 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T34), lösungsgeglüht und spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 4373A SAE AMS 4373A (Aluminiumlegierung, gewalzte, gezogene oder kaltgefertigte Stangen, Stäbe und Draht 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -O oder bei Bestellung -F)) | 1 | chevron_right |
| SAE AMS 4374A SAE AMS 4374A (Aluminiumlegierung, Strangpressprofile 8,9Zn - 2,2Cu - 2,2Mg - 0,15Zr (7136-T73511) lösungsgeglüht, durch Strecken spannungsarm geglüht, gerichtet und überaltert) | 1 | chevron_right |
| SAE AMS 4375N SAE AMS 4375N (Feinblech und Grobblech, Magnesiumlegierung, 3.0AI - 1.0Zn - 0.20Mn (AZ31B-O), geglüht und rekristallisiert) | 1 | chevron_right |
| SAE AMS 4376H SAE AMS 4376H (Grobblech, Magnesiumlegierung, 3.0AI - 1.0Zn - 0.20Mn (AZ31B-H26), kaltgewalzt und teilweise geglüht) | 1 | chevron_right |
| SAE AMS 4377K SAE AMS 4377K (Magnesium Alloy, Sheet and Plate 3.0AI - 1.0Zn - 0.20Mn (AZ31B-H24) Cold Rolled, Partially Annealed) | 1 | chevron_right |
| SAE AMS 4378A SAE AMS 4378A (Aluminiumlegierung, Blech (7160-T7651) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr, lösungsgeglüht, spannungsfrei und überaltert) | 1 | chevron_right |
| SAE AMS 4379A SAE AMS 4379A (Aluminum Alloy, Discontinuously Reinforced Extruded Bar, Rod, Wire and Shapes 2124A/SiC/25p (3 μm)- T1P) | 1 | chevron_right |
| SAE AMS 4382E SAE AMS 4382E (Magnesium Alloy, Plate, Extra Flat, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0), Annealed) | 1 | chevron_right |
| SAE AMS 4383F SAE AMS 4383F (Magnesiumlegierung, Feinblech und Grobblech, 2.0Th - 0.78Mn, lösungsgeglüht, kaltumgeformt, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4384J SAE AMS 4384J (Magnesiumlegierung, Feinblech und Grobblech ,3.2Th - 0.70Zr, geglüht, rekristallisiert) | 1 | chevron_right |
| SAE AMS 4385K SAE AMS 4385K (Magnesiumlegierung, Feinblech und Grobblech, 3.2Th - 0.70Zr, kaltgewalzt und teilweise geglüht) | 1 | chevron_right |
| SAE AMS 4386B SAE AMS 4386B (Blech und Grobblech aus Magnesiumlegierung, 14li 1.25al) | 1 | chevron_right |
| SAE AMS 4387F SAE AMS 4387F (Magnesiumlegierung, Extrusionen, 2.3Zn - 0.62Zr (ZK21A-F), wie extrudiert) | 1 | chevron_right |
| SAE AMS 4388F SAE AMS 4388F (Magnesiumlegierung, Extrusionen, 3.0Th - 1.5Mn (HM31A-F), wie extrudiert) | 1 | chevron_right |
| SAE AMS 4389G SAE AMS 4389G (Magnesiumlegierung, Extrusionen 3.0Th - 1.5Mn (HM31A-T5) Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4390K SAE AMS 4390K (Feinblech und Grobblech, Magnesiumlegierung, 2.0Th - 0.78Mn (HM21A-T8), lösungsgeglüht, kaltumgeformt, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4391A SAE AMS 4391A (Schweissdraht aus Magnesiumlegierung 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A)) | 1 | chevron_right |
| SAE AMS 4392A SAE AMS 4392A (Schweissdraht aus Magnesiumlegierung 4.2Zn - 1.2 Seltenerden - 0.7Zr (ZE41A)) | 1 | chevron_right |
| SAE AMS 4393A SAE AMS 4393A (Schweissdraht aus Magnesiumlegierung 4.0Y - 2.3Nd - 0.7Zr (WE43B)) | 1 | chevron_right |
| SAE AMS 4394A SAE AMS 4394A (Schweissdraht aus Magnesiumlegierung 2.5Ag - 2.1Di - 0.70Zr (QE22A)) | 1 | chevron_right |
| SAE AMS 4395G SAE AMS 4395G (Magnesiumlegierung, Schweißdraht, 9.0Al - 2.0Zn (AZ92A)) | 1 | chevron_right |
| SAE AMS 4396G SAE AMS 4396G (Schweissdraht aus Magnesiumlegierung 3.2 Seltenerden - 2.5Zn - 0.72Zr (EZ33A)) | 1 | chevron_right |
| SAE AMS 4397A SAE AMS 4397A (Magnesiumdraht, Schweißen 14Li - 1.25AI (LA 141 A)) | 1 | chevron_right |
| SAE AMS 4398A SAE AMS 4398A (Schweissdraht aus Magnesiumlegierung 8.7Al - 0.70Zn - 0.26Mn (AZ91E)) | 1 | chevron_right |
| SAE AMS 4399A SAE AMS 4399A (Schweissdraht aus Magnesiumlegierung 5.1Y - 3.0Re - 0.7Zr (WE54A)) | 1 | chevron_right |
| SAE AMS 4400A SAE AMS 4400A (Schweissdraht aus Magnesiumlegierung 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A)) | 1 | chevron_right |
| SAE AMS 4401C SAE AMS 4401C (Aluminiumlegierung, Grobblech, (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4402B SAE AMS 4402B (Aluminiumlegierung, extrudierte Profile, (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn, geglüht, streckgezogen, lösungsgeglüht, spannungsarm durch Strecken) | 1 | chevron_right |
| SAE AMS 4403B SAE AMS 4403B (Aluminiumlegierung, Gesenkschmiedeteile, 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452), lösungsgeglüht, spannungsarm durch Kompression, überaltert) | 1 | chevron_right |
| SAE AMS 4404C SAE AMS 4404C (Aluminiumlegierung, extrudierte Profile, (6056-T4511) 1.0Si - 0.90Mg - 0.80Cu - 0.60Mn - 0.40Zn, lösungsgeglüht, spannungsarm durch Kompression) | 1 | chevron_right |
| SAE AMS 4405C SAE AMS 4405C (Aluminiumlegierung, Alclad Blech (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Lösungsbehandelt und natürlich gealtert) | 1 | chevron_right |
| SAE AMS 4406B SAE AMS 4406B (Aluminiumlegierung, Schleuderguss, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61), heißisostatisch gepresst, lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4407B SAE AMS 4407B (Aluminiumlegierung, Grobblech, (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4408B SAE AMS 4408B (Aluminiumlegierung, Grobblech, (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4409A SAE AMS 4409A (Aluminiumlegierung, Grobblech, 4.0Zn - 2.0Mg - 0.32Mn (7019-T651), lösungsgeglüht, spannungsarm , warmausgelagert) | 1 | chevron_right |
| SAE AMS 4410A SAE AMS 4410A (Aluminiumlegierung, Grobblech, (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4411A SAE AMS 4411A (Aluminiumlegierung, Grobblech, (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4412C SAE AMS 4412C (Aluminiumlegierung, Blech 3.2Cu - 0.52Mg - 0.30Ag - 0.95Li - 0.12Zr (2198-T8) Lösungsgeglüht, kaltverformt und künstlich gealtert) | 1 | chevron_right |
| SAE AMS 4413C SAE AMS 4413C (Aluminiumlegierung, Platte 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) lösungsgeglüht, spannungsarm geglüht und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4414A SAE AMS 4414A (Aluminiumlegierung, Freiformschmiedeteile, 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452), lösungsgeglüht, spannungsarm durch Kompression, überaltert) | 1 | chevron_right |
| SAE AMS 4415B SAE AMS 4415B (Extrusionen aus Aluminiumlegierung 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) lösungsgeglüht, Spannungsarm geglüht, begradigt und überaltert) | 1 | chevron_right |
| SAE AMS 4416B SAE AMS 4416B (Aluminiumlegierung, Stranggepresste Profile (2196-T8511) 2.9Cu - 1.7Li - 0.4Mg - 0.4Ag - 0.10Zr lösungsgeglüht, entspannt durch strecken und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4417C SAE AMS 4417C (Guss, Sandguss, Magnesiumlegierung, 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21 - T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4418J SAE AMS 4418J (Magnesiumlegierung, Sandguss, 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4419C SAE AMS 4419C (Magnesiumlegierung, Guss, Sandguss, 2.5Ag - 1.1Th - 1.0Di - 0.70Zr (QH21-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4420P SAE AMS 4420P (Magnesiumlegierung, Guss, Sandguss, 6Al - 3Zn (AZ63A-F), Gusszustand) | 1 | chevron_right |
| SAE AMS 4421A SAE AMS 4421A (Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-O), Annealed) | 1 | chevron_right |
| SAE AMS 4422P SAE AMS 4422P (Magnesiumlegierung, Guss, Sandguss, 6.0Al - 3.0Zn (AZ63 - T4), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4423A SAE AMS 4423A (Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T8511) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Precipitation Heat Treated, and Straightened) | 1 | chevron_right |
| SAE AMS 4424M SAE AMS 4424M (Magnesium alloy castings, Sand, 6.0Al - 3.0Zn (AZ63-T6), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4425D SAE AMS 4425D (Magnesiumlegierung, Guss, Sandguss, 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4426B SAE AMS 4426B (Guss, Sandguss, Magnesiumlegierung, 5.1Y - 3.0Re - 0.70Zr (WE54 - T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4427D SAE AMS 4427D (Magnesiumlegierung, Sandguss 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Lösungs- und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4429B SAE AMS 4429B (Magnesiumlegierung, Guss, Sandguss, 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4431 SAE AMS 4431 (Magnesiumlegierung, direkter Kühlstrangguss 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4432A SAE AMS 4432A (Aluminum Alloy, Plate (7160-T7451), 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr, Solution Heat Treated, Stress Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4433 SAE AMS 4433 (Aluminum Alloy, Plate (7140-T7351), 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr, Solution Heat Treated, Stress Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4434N SAE AMS 4434N (Magnesiumlegierung, Guss, Sandguss, 9.0Al - 2.0Zn (AZ92-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4437G SAE AMS 4437G (Magnesiumlegierung, Guss, Sandguss, 8.7Al - 0.70Zn (AZ91C-T6), lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 4438E SAE AMS 4438E (Magnesiumlegierung, Guss, Sandguss, 5.7Zn - 1.8Th (ZH62A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4439H SAE AMS 4439H (Magnesiumlegierung, Guss, 4.2Zn - 1.2Seltenerden - 0.7Zr (ZE41A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4440E SAE AMS 4440E (Gussteile aus Magnesiumlegierung, Sand 3.5Ce-0.70Zr(EK41A-T5), Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4441E SAE AMS 4441E (Magnesiumlegierung, Guss, Sandguss, 3.5Ce - 0.70Zr (EK41A-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4442H SAE AMS 4442H (Magnesiumlegierung, Guss, Sandguss, 3.2 Seltenerden - 2.5Zn - 0.70Zr (EZ33A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4443J SAE AMS 4443J (Magnesiumlegierung, Guss, Sandguss, 4.5Zn - 0.75Zr (ZK51A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4444E SAE AMS 4444E (Magnesiumlegierung, Guss, Sandguss, 6.0Zn - 0.80Zr (ZK61A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4445G SAE AMS 4445G (Magnesiumlegierung, Guss, Sandguss, 3.3Th - 0.7Zr (HK31A-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4446D SAE AMS 4446D (Magnesiumlegierung, Guss, Sandguss, 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4447F SAE AMS 4447F (Magnesiumlegierung, Guss, Sandguss, 3.3Th - 2.1Zn - 0.75Zr (HZ32A-T5), ausgehärtet) | 1 | chevron_right |
| SAE AMS 4448A SAE AMS 4448A (Aluminiumlegierung, Platte (7160-T7351) 7,0Zn - 2,2Cu - 1,5Mg - 0,10Zr lösungsgeglüht, entspannt und überaltert) | 1 | chevron_right |
| SAE AMS 4450A SAE AMS 4450A (Aluminum Alloy, Extruded Profiles (2043-T85), 2.8Cu - 1.65Li - 0.35Mg - 0.1Zr, Solution Heat Treated, Stress Relieved by Stretching, and Aged) | 1 | chevron_right |
| SAE AMS 4452G SAE AMS 4452G (Magnesiumlegierung, Feinguss 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Lösungs- und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4453H SAE AMS 4453H (Magnesiumlegierung, Investment-Feinguss, 9.0Al - 2.0Zn (AZ92A-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4455J SAE AMS 4455J (Magnesium Alloy, Investment Castings, 10Al (AM100A-T6), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4456B SAE AMS 4456B (Aluminiumlegierung, Freiformschmiedestücke 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) lösungsgeglüht, entspannt durch kompression und überaltert) | 1 | chevron_right |
| SAE AMS 4457B SAE AMS 4457B (Aluminum Alloy, Sheet, 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.12Zr (2098-T8), Solution Heat Treated, Cold Worked, and Artificially Aged) | 1 | chevron_right |
| SAE AMS 4458B SAE AMS 4458B (Aluminiumlegierung, Platte (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 lösungsgeglüht, kalt bearbeitet undwarmausgelagert) | 1 | chevron_right |
| SAE AMS 4459C SAE AMS 4459C (Aluminum Alloy, Extrusion, 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T81) Solution Heat Treated, Stress Relieved by Stretching 1 to 3% and Aged) | 1 | chevron_right |
| SAE AMS 4460C SAE AMS 4460C (Aluminiumlegierung, zweiseitig beschichtet, Feinblech, 0.6Mg - 0.35Si - 0.28Cu (No. 24 Lötblech), wie hergestellt) | 1 | chevron_right |
| SAE AMS 4461C SAE AMS 4461C (Aluminiumlegierung, Blech und Grobblech, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Blech und Platte) geglüht; oder falls spezifiziert, “Wie Fabriziert“ (2024-F)) | 1 | chevron_right |
| SAE AMS 4462B SAE AMS 4462B (Aluminiumlegierung, Blech und Grobblech, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T3 Blech, -T351 Platte), lösungsgeglüht, kalt bearbeitet und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4463B SAE AMS 4463B (Aluminmum Alloy, Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr Solution Heat Treated, Stress Relieved, and Overaged) | 1 | chevron_right |
| SAE AMS 4464B SAE AMS 4464B (Grobblech aus Aluminiumlegierung (2624-T351) 4.1Cu – 1.4Mg - 0.6Mn, lösungsgeglüht, kalt bearbeitet und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4465C SAE AMS 4465C (Aluminum Alloy, Clad One Side Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 23 Brazing Sheet) As Fabricated) | 1 | chevron_right |
| SAE AMS 4466C SAE AMS 4466C (Aluminiumlegierung, Blech und Grobblech, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Blech und Platte), lösungsgeglüht, 6% kalt bearbeitet und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4467C SAE AMS 4467C (Aluminiumlegierung, Blech und Grobblech, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T861 Blech und Platte), lösungsgeglüht, 6% kalt bearbeitet und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4468A SAE AMS 4468A (Aluminiumlegierung, Grobblech 5.0Cu - 0.4Mn – 0.5Mg - 0.4Ag (2139-T84), lösungsgeglüht, kalt bearbeitet und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4469B SAE AMS 4469B (Rohre aus Aluminiumlegierung, Nahtlos, gezogen 1.8 Cu - 1.0 Mg - 0.8 Si - 0.20 Cr lösungsgeglüht, entspannt durch dehnen, und ausgelagert (2013-T4511)) | 1 | chevron_right |
| SAE AMS 4470D SAE AMS 4470D (Aluminiumlegierung, Grobblech, (7085-T7451), 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr, lösungsgeglüht, spannungsarm, überaltert) | 1 | chevron_right |
| SAE AMS 4471C SAE AMS 4471C (Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB<sub>2</sub>/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4472B SAE AMS 4472B (Aluminiumlegierung, Platte, 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T34), lösungsgeglüht und spannungsarmgeglüht) | 1 | chevron_right |
| SAE AMS 4473B SAE AMS 4473B (Grobblech aus Aluminiumlegierung (2624-T39) 4.1Cu – 1.4Mg - 0.6Mn, lösungsgeglüht, Kalt bearbeitet und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4474C SAE AMS 4474C (Aluminiumlegierung, Bleche und Platten 4,0Cu - 1,0Li - 0,40Mg - 0,35Ag - 0,13Zr (2195-T8) lösungsgeglüht, kaltverformt und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4475C SAE AMS 4475C (Aluminiumlegierung, Aufgerolltes Blech, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024; -T4 Aufgerolltes Blech) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4476A SAE AMS 4476A (Aluminiumlegierung, Extrusionen 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O), geglüht) | 1 | chevron_right |
| SAE AMS 4477B SAE AMS 4477B (Aluminiumlegierung, Rollenblech 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4478B SAE AMS 4478B (Aluminiumlegierung, Blech und Grobblech, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T81 Feinblech, -T851 Platte) lösungsgeglüht, kalt bearbeitet und warmausgelagert) | 1 | chevron_right |
| SAE AMS 4479A SAE AMS 4479A (Aluminium-Legierung, Strangpressprofile (2824-T3511) 4.0Cu - 1,35 Mg - 0.7Mn lösungsgeglüht und entspannt durch Dehnung) | 1 | chevron_right |
| SAE AMS 4480B SAE AMS 4480B (Aluminium-Legierung, nahtlose gezogene Rohre 1,0 Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) lösungsgeglüht und kaltausgelagert) | 1 | chevron_right |
| SAE AMS 4481A SAE AMS 4481A (Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T8510), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Precipitation Heat Treated, Unstraightened) | 1 | chevron_right |
| SAE AMS 4482B SAE AMS 4482B (Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4483F SAE AMS 4483F (Magnesium Alloy Castings, Permanent Mold, 10Al (AM100A-T6), Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4484M SAE AMS 4484M (Magnesiumlegierung, Guss, Dauerform, 9.0Al - 2.0Zn (AZ92A-T6), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4485B SAE AMS 4485B (Magnesiumlegierung, Extrusionen 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4490K SAE AMS 4490K (Magnesiumlegierung, Druckguss, 9.0Al - 0.70Zn (AZ91D, Temper F), Gusstzustand) | 1 | chevron_right |
| SAE AMS 4491A SAE AMS 4491A (Aluminiumlegierung, Extrusionen 4,4 Cu - 1,5 mg - 0,60 Mn (2024-T81) Lösungsgeglüht, kalt bearbeitet und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 4500L SAE AMS 4500L (Kupfer, Feinblech, Bandstahl und, Grobblech, weichgeglüht) | 1 | chevron_right |
| SAE AMS 4501F SAE AMS 4501F (Kupfer, Feinblech, Bandblech, Grobblech, sauerstofffrei, dünn kaltgewalzt) | 1 | chevron_right |
| SAE AMS 4505M SAE AMS 4505M (Kupferlegierung (Messing), Feinblech, Bandstahl, Grobblech, 70Cu - 30Zn, geglüht (OS035)) | 1 | chevron_right |
| SAE AMS 4507K SAE AMS 4507K (Kupferlegierung (Messing), Feinblech, Bandstahl und Grobblech, 70Cu - 30Zn, halbhart (H02)) | 1 | chevron_right |
| SAE AMS 4508K SAE AMS 4508K (Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded) | 1 | chevron_right |
| SAE AMS 4510J SAE AMS 4510J (Phosphor-Bronze, Feinblech, Bandstahl und Grobblech, 94.5Cu - 4.0Sn - 0.19P, federhart (H08)) | 1 | chevron_right |
| SAE AMS 4511B SAE AMS 4511B (Kupfer-Beryllium-Legierung, Guss, 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si, lösungsgeglüht, ausgehärtet (TFOO)) | 1 | chevron_right |
| SAE AMS 4520M SAE AMS 4520M (Bleihaltiges Phosphorbronze-Band 88,5Cu - 4,0Sn - 4,0Pb - 3,0Zn - 0,26P Kaltgewalzt, halbhart (H02)) | 1 | chevron_right |
| SAE AMS 4530J SAE AMS 4530J (Kupfer-Beryllium-Legierung, Feinblech, Bandstahl, Grobblech, 98Cu - 1.9Be, lösungsgeglüht(TB00)) | 1 | chevron_right |
| SAE AMS 4532J SAE AMS 4532J (Kupfer-Beryllium-Legierung, Feinblech und Bandstahl, 98Cu - 1.9Be, halbhart (TD02)) | 1 | chevron_right |
| SAE AMS 4533F SAE AMS 4533F (Copper-Beryllium Alloy, Bars and Rods, 98Cu - 1.9Be, Solution and Precipitation Heat Treated (TF00, formerly AT)) | 1 | chevron_right |
| SAE AMS 4534E SAE AMS 4534E (Kupfer-Beryllium-Legierung, Stangen und Rundstäbe, 98Cu - 1.9Be, lösungsgeglüht, kaltumgeformt, ausgehärtet (TH04, früher HT)) | 1 | chevron_right |
| SAE AMS 4535E SAE AMS 4535E (Kupfer-Beryllium-Legierung, mechanische Rohre, 98Cu - 1.9Be, lösungsgeglüht, ausgehärtet (TF00, früher AT)) | 1 | chevron_right |
| SAE AMS 4544J SAE AMS 4544J (Nickel-Kupfer-Legierung, korrosionsbeständig, Feinblech, Bandstahl, Grobblech, 67Ni - 30Cu, geglüht) | 1 | chevron_right |
| SAE AMS 4553E SAE AMS 4553E (Messing, nahtlose Rohre, 85Cu-15Zn, geglüht (O61)) | 1 | chevron_right |
| SAE AMS 4554D SAE AMS 4554D (Messingrohre, nahtlos, 66.5Cu - 33Zn - 0.45Pb, geglüht) | 1 | chevron_right |
| SAE AMS 4555L SAE AMS 4555L (Bleihaltiges Messing, nahtlose Rohre 66,5Cu - 32,5Zn - 0,48Pb leicht geglüht (O50)) | 1 | chevron_right |
| SAE AMS 4558J SAE AMS 4558J (Messing, nahtlose Rohre, 66.5Cu - 31.5Zn - 1.6Pb, gezogen (H58)) | 1 | chevron_right |
| SAE AMS 4574F SAE AMS 4574F (Nickel-Kupfer-Legierung, korrosionsbeständig, Rohr, nahtlos, 67Ni - 31Cu, geglüht) | 1 | chevron_right |
| SAE AMS 4575F SAE AMS 4575F (Nickel-Kupfer-Legierung, Rohr, gelötet, korrosionsbeständig, 67Ni - 31Cu, geglüht) | 1 | chevron_right |
| SAE AMS 4590D SAE AMS 4590D (Strangpressprofile, Nickel-Aluminium-Bronze, martensitisch 78,5Cu - 10,5Al - 5,1Ni - 4,8Fe abgeschreckt und angelassen (TQ50)) | 1 | chevron_right |
| SAE AMS 4595A SAE AMS 4595A (Copper Nickel Tin Alloy Plate, 77Cu - 15Ni - 8Sn, Solution Annealed and Spinodal Hardened (TX02, formerly TX00)) | 1 | chevron_right |
| SAE AMS 4596C SAE AMS 4596C (Copper Nickel Tin Alloy, Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX02, formerly TX00)) | 1 | chevron_right |
| SAE AMS 4597A SAE AMS 4597A (Kupfer-Nickel-Zinn-Legierung, Stangen, Rundstäbe, 77Cu - 15Ni - 8Sn, lösungsgeglüht, kaltgeformt und spinodal gehärtet (TX TS)) | 1 | chevron_right |
| SAE AMS 4598B SAE AMS 4598B (Kupfer-Nickel-Zinn-Legierung, mechanisches Rohr 77Cu - 15Ni - 8Sn lösungsgeglüht und spinodalgehärtet (TX02, früher TX00)) | 1 | chevron_right |
| SAE AMS 4599B SAE AMS 4599B (Aluminiumlegierung, Blech und Grobblech, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Lösungsgeglüht und Ausscheidungsgeglüht (2219 -T81/-T851)) | 1 | chevron_right |
| SAE AMS 4600B SAE AMS 4600B (Aluminiumlegierung, Blech and Grobblech, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, lösungsgeglüht, kalt bearbeitet (8%) und kaltausgelagert (2219 -T27)) | 1 | chevron_right |
| SAE AMS 4601B SAE AMS 4601B (Aluminiumlegierung, Blech und Grobblech, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, lösungsgeglüht, Kalt bearbeitet und kaltausgelagert(2219 -T31/-T351)) | 1 | chevron_right |
| SAE AMS 4602E SAE AMS 4602E (Stangen, Stäbe und Formen aus Kupfer sauerstofffrei, harter Zustand (H04)) | 1 | chevron_right |
| SAE AMS 4610P SAE AMS 4610P (Messing, Automatenstahl, Stangen und Rundstäbe, 61.5Cu - 35Zn - 3.1Pb oder 2.8Pb, halbhart (H02)) | 3 | chevron_right |
| SAE AMS 4611K SAE AMS 4611K (Messing, Verwendung in der Seefahrt, Stangen und Rundstäbe, 60.5Cu - 38.7Zn - 0.8Sn, halbhart (H02)) | 1 | chevron_right |
| SAE AMS 4612L SAE AMS 4612L (Messing, Verwendung in der Seefahrt, Stangen und Rundstäbe, 60.5Cu - 38.5Zn - 0.75Sn, hart angelassen (H04)) | 1 | chevron_right |
| SAE AMS 4613B SAE AMS 4613B (Aluminiumlegierung, Blech und Grobblech, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, lösungsgeglüht, Kalt bearbeitet (8%) und Ausscheidungsgeglüht (2219 -T87)) | 1 | chevron_right |
| SAE AMS 4614J SAE AMS 4614J (Messing, Schmiedestücke, Automatenstahl, 60Cu - 2.0Pb - 37.5Zn, Schmiedezustand (M10)) | 2 | chevron_right |
| SAE AMS 4616H SAE AMS 4616H (Silikon-Bronze-Stangen, Rundstäbe, Schmiedestücke, Rohre, 92Cu - 3.2Si - 2.8Zn - 1.5Fe, spannungsarm) | 1 | chevron_right |
| SAE AMS 4617B SAE AMS 4617B (Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510), Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged) | 1 | chevron_right |
| SAE AMS 4625J SAE AMS 4625J (Stahl, Schweißdraht 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130)) | 2 | chevron_right |
| SAE AMS 4631F SAE AMS 4631F (Aluminium-Bronze-Rundstäbe,Stangen und Schmiedestücke, 90.5Cu - 7.5Al - 1.95: spannungsarm) | 1 | chevron_right |
| SAE AMS 4632E SAE AMS 4632E (Aluminium Bronze, Stangen und Stäbe, 90Cu-8.5Al, Hart) | 1 | chevron_right |
| SAE AMS 4633C SAE AMS 4633C (Bronze, Aluminium-Silikon, Rundstäbe, Stangen und Schmiedestücke 90Cu - 7.0Al - 1.8Si gezogen, spannungsarm (HR50)) | 1 | chevron_right |
| SAE AMS 4634E SAE AMS 4634E (Aluminium-Bronze-Stangen, Rundstäbe, Schmiedestücke, 90.5Cu - 7.5Al - 1.9Si, spannungsarm) | 1 | chevron_right |
| SAE AMS 4635H SAE AMS 4635H (Aluminium-Bronze-Stangen, Rundstäbe, Schmiedestücke 87Cu - 9Al - 3Fe, spannungsarm) | 2 | chevron_right |
| SAE AMS 4640H SAE AMS 4640H (Aluminium-Bronze, Stangen, Rundstäbe, Formteile, Rohre, Schmiedestücke, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, gezogen und spannungsarm (HR50) oder anlassgeglüht (TQ50)) | 1 | chevron_right |
| SAE AMS 4650P SAE AMS 4650P (Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu - 1.9Be Solution Heat Treated (TB00)) | 1 | chevron_right |
| SAE AMS 4651C SAE AMS 4651C (Kupfer-Beryllium-Legierung, Stangen, Rundstäbe, 98Cu - 1.9Be (CDA 172), hart angelassen (TD04)) | 1 | chevron_right |
| SAE AMS 4674J SAE AMS 4674J (Nickel - Copper Alloy, Corrosion-Resistant, Bars, Forgings and Forging Stock 67Ni - 30Cu - 0.04S Free Machining) | 1 | chevron_right |
| SAE AMS 4675F SAE AMS 4675F (Nickel-Kupfer-Legierung, korrosionsbeständig, Stäbe und Schmiedestücke, 67Ni - 30Cu) | 1 | chevron_right |
| SAE AMS 4676F SAE AMS 4676F (Nickel-Kupfer-Legierung, korrosionsbeständig, Stäbe und Schmiedestücke, 66.5Ni - 3.0Al - 0.62Ti - 28Cu, warmgefertigt, aushärtbar) | 1 | chevron_right |
| SAE AMS 4677C SAE AMS 4677C (Nickel-Kupfer Legierung, korrosionsbeständig, Stäbe, Schmiedestücke 66.5Ni - 2.9Al - 30Cu, geglüht) | 1 | chevron_right |
| SAE AMS 4700F SAE AMS 4700F (Kupferdraht, blank, hochrein) | 1 | chevron_right |
| SAE AMS 4701H SAE AMS 4701H (Kupferdraht, sauerstofffrei, 99.95(Cu+Ag), geglüht) | 1 | chevron_right |
| SAE AMS 4710H SAE AMS 4710H (Messingdraht, verzinnt, 65Cu - 35Zn, geglüht (061)) | 2 | chevron_right |
| SAE AMS 4712H SAE AMS 4712H (Kupferlegierung, Draht, 65Cu - 35Zn, geglüht (061)) | 2 | chevron_right |
| SAE AMS 4713H SAE AMS 4713H (Messing, Draht, 65Cu - 35Zn, Achtel-hart (H00)) | 2 | chevron_right |
| SAE AMS 4720J SAE AMS 4720J (Draht, Phosphor-Bronze, 94Cu - 5.0Sn - 0.19P, kaltgezogen, federhart (H08)) | 1 | chevron_right |
| SAE AMS 4725F SAE AMS 4725F (Kupfer-Beryllium-Legierung, Draht, 98Cu - 1.9Be, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4730J SAE AMS 4730J (Nickel-Kupfer-Legierung, Draht, korrosionsbeständig, 67Ni - 31Cu, geglüht (400)) | 1 | chevron_right |
| SAE AMS 4731E SAE AMS 4731E (Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant 67Ni - 31Cu (Monel 400), Annealed) | 1 | chevron_right |
| SAE AMS 4732D SAE AMS 4732D (Kupfer-Nickel-Legierung, Draht, Band, 77.5Cu - 22.5Ni) | 2 | chevron_right |
| SAE AMS 4740E SAE AMS 4740E (Kupfer, Pulver, 99.0 Cu, Minimum, Herstellungszustand) | 1 | chevron_right |
| SAE AMS 4750E SAE AMS 4750E (Lot, Zinn-Blei, 45Sn - 55Pb) | 1 | chevron_right |
| SAE AMS 4751D SAE AMS 4751D (Zinn-Blei, eutektisch, 63Sn - 37Pb) | 1 | chevron_right |
| SAE AMS 4761C SAE AMS 4761C (Silberlegierung, Hartlotzusatzmetall, 38Ag - 32Cu - 28Zn - 2.0Sn, 1200 bis 1330 °F (649 bis 721 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4762C SAE AMS 4762C (Silberlegierung, Hartlotzusatzmetall, 40Ag - 30Cu - 30Zn, 1245 bis 1340 °F (674 bis 727 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4763C SAE AMS 4763C (Silberlegierung, Hartlotzusatzmetall, 56Ag - 22Cu - 17Zn - 5.0Sn, 1145 bis 1205 °F (618 bis 652 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4764H SAE AMS 4764H (Kupferlegierung, Hartlotzusatzmetall, 52.5Cu - 38Mn - 9.5Ni, 1615 bis 1700 °F (879 bis 927 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4765G SAE AMS 4765G (Silberlegierung, Hartlotzusatzmetall, 56Ag - 42Cu - 2.0Ni, 1420 bis 1640 °F (771 bis 893 °C), Solidus-Liquidus-Bereich) | 2 | chevron_right |
| SAE AMS 4766J SAE AMS 4766J (Silberlegierung, Hartlotzusatzmetall, 85Ag - 15Mn, 1760 bis 1780 °F (960 bis 971 °C), Solidus-Liquidus-Bereich) | 2 | chevron_right |
| SAE AMS 4767H SAE AMS 4767H (Silberlegierung, Hartlotzusatzmetall, 92.5Ag - 7.2Cu - 0.22Li 1435 bis 1635 °F (779 bis 891 °C), Solidus-Liquidus-Bereich) | 2 | chevron_right |
| SAE AMS 4768J SAE AMS 4768J (Silberlegierung, Hartlotzusatzmetall, 35Ag - 26Cu - 21Zn - 18Cd, 1125 bis 1295 °F (607 bis 702 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4769G SAE AMS 4769G (Silberlegierung, Hartlotzusatzmetall, 45Ag - 24Cd - 16Zn - 15Cu, 1125 bis 1145 °F (607 bis 618 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4770L SAE AMS 4770L (Silberlegierung, Hartlotzusatzmetall, 50Ag - 18Cd - 16.5Zn - 15.5Cu, 1160 bis 1175 °F (627 bis 635 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4771J SAE AMS 4771J (Silberlegierung, Hartlotzusatzmetall, 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni ,1170 bis 1270 °F (632 bis 688 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4772L SAE AMS 4772L (Silberlegierung, Hartlotzusatzmetall, 54Ag - 40Cu - 5.0Zn - 1.0Ni, 1325 bis 1575 °F (718 bis 857 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4773H SAE AMS 4773H (Silberlegierung, Hartlotzusatzmetall, 60Ag - 30Cu - 10Sn, 1115 bis 1325 °F (602 bis 718 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4774H SAE AMS 4774H (Silberlegierung, Hartlotzusatzmetall, 63Ag - 28.5Cu - 6.0Sn - 2.5Ni, 1275 bis 1475 °F (691 bis 802 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4775L SAE AMS 4775L (Nickellegierung, Hartlotfüllmetall 73Ni - 0,75C - 4,5Si - 14Cr - 3,1B - 4,5Fe 977 ° C (1790 ° F) Solidustemperatur bis 1077 ° C (1970 ° F) Liquidustemperatur) | 1 | chevron_right |
| SAE AMS 4776K SAE AMS 4776K (Nickellegierung, Hartlotzusatzmetall 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (kohlenstoffarm) 1790 °F (977 °C) Solidus bis 1970 °F (1077 °C) Liquidus Bereich) | 1 | chevron_right |
| SAE AMS 4777J SAE AMS 4777J (Nickellegierung, Hartlotzusatzmetall 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus bis 1830 °F (999 °C) Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4778M SAE AMS 4778M (Nickellegierung, Hartlotzusatzmetall 92Ni - 4.5Si - 3.1B 1800 bis 1900°F Solidus-Liquidus Bereich) | 1 | chevron_right |
| SAE AMS 4779L SAE AMS 4779L (Nickellegierung, Hartlotzusatzmetall 94Ni - 3.5Si - 1.8B 1800°F (982°C) Solidustemperatur, 1950 °F (1066 °C) Liquidustemperatur) | 1 | chevron_right |
| SAE AMS 4780H SAE AMS 4780H (Nickellegierung, Hartlotzusatzmetall, 66Mn - 16Ni - 16Co - 0.80B 1770 bis 1875 °F (966 bis 1024 °C) Solidus-Liquidus Range) | 1 | chevron_right |
| SAE AMS 4782H SAE AMS 4782H (Nickellegierung, Hartlotzusatzmetall 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidustemperatur, 2075 °F (1135 °C) Liquidustemperatur) | 1 | chevron_right |
| SAE AMS 4783H SAE AMS 4783H (Kobaltlegierung, Hochtemperatur-Hartlotzusatzmetall 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 bis 2100°F (1121 bis 1149°C) Solidus-Liquidus Bereich) | 1 | chevron_right |
| SAE AMS 4784H SAE AMS 4784H (Gold-Palladium-Nickel-Legierung, Füllmetall, bei hohen Temperaturen, 50Au - 25Pd - 25Ni, 2015 bis 2050 °F (1102 bis 1121 °C), Solidus-Liquidus-Bereich) | 2 | chevron_right |
| SAE AMS 4785K SAE AMS 4785K (Gold-Palladium-Nickel-Legierung, Füllmetall, bei hohen Temperaturen, 30Au - 34Pd - 36Ni, 2075 bis 2130 °F (1135 bis 1166 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4786K SAE AMS 4786K (Gold-Palladium-Nickel-Legierung, Hartlotzusatzmetall, Hochtemperatur 70Au - 8,0Pd - 22Ni 1845 bis 1915 °F (1007 bis 1046 °C) Solidus-Liquidus Bereich) | 1 | chevron_right |
| SAE AMS 4787H SAE AMS 4787H (Gold-Nickel-Legierung, Hartlot, Hochtemperatur 82Au - 18Ni, 1740°F (949°C) Solidus-Liquidus-Temperatur) | 1 | chevron_right |
| SAE AMS 4788C SAE AMS 4788C (Gold-Palladium-Nickel-Legierung, Füllmetall, 50Ag - 28Zn - 20Cu - 2.0Ni, 1220 bis 1305 °F (660 bis 707 °C), Solidus-Liquidus-Bereich) | 1 | chevron_right |
| SAE AMS 4800E SAE AMS 4800E (Für Lager, Babbittmetall, 91Sn - 4.5Sb - 4.5Cu) | 1 | chevron_right |
| SAE AMS 4803F SAE AMS 4803F (Zinklegierung, Druckguss, 4.0Al - 0.04Mg (AG40A), Druckzustand) | 1 | chevron_right |
| SAE AMS 4805F SAE AMS 4805F (Material für Lager, gesintertes Metallpulver, 89Cu - 10Sn, ölimprägniert) | 1 | chevron_right |
| SAE AMS 4815G SAE AMS 4815G (Lager, silberplattierter Stahlrücken) | 2 | chevron_right |
| SAE AMS 4816D SAE AMS 4816D (Lager, silberplattierter Bandstahl) | 1 | chevron_right |
| SAE AMS 4820F SAE AMS 4820F (Matrial für Lager, verbleites Kupfer, 70Cu - 28.5Pb, Stahlrücken) | 1 | chevron_right |
| SAE AMS 4822F SAE AMS 4822F (Matrial für Lager, verbleites Bronze, 71.5Cu - 25Pb - 3.0Sn, Stahlrücken) | 1 | chevron_right |
| SAE AMS 4824E SAE AMS 4824E (Matrial für Lager, Babbitt-beschichtet, verbleite Bronze, Stahlrücken) | 1 | chevron_right |
| SAE AMS 4825D SAE AMS 4825D (Matrial für Lager, verbleite Bronze, 74Cu – 15.5Pb – 10Sn, Stahlrücken) | 1 | chevron_right |
| SAE AMS 4827E SAE AMS 4827E (Matrial für Lager, verbleite Bronze, 80Cu - 10Pb - 10Sn, Stahlrücken) | 2 | chevron_right |
| SAE AMS 4842H SAE AMS 4842H (Castings, Leaded Bronze, Sand and Centrifugal, 80Cu - 10Sn - 9.5Pb, As Cast) | 1 | chevron_right |
| SAE AMS 4845K SAE AMS 4845K (Tin Bronze Castings, Sand and Centrifugal, 87.5Cu - 10Sn - 2Zn, As Cast) | 1 | chevron_right |
| SAE AMS 4855G SAE AMS 4855G (verbleites Rotmessung, Sand- und Schleuderguss, 85Cu - 5.0Sn - 5.0Pb - 5.0Zn, Gusszustand) | 2 | chevron_right |
| SAE AMS 4860F SAE AMS 4860F (Mangan-Bronze, Sand- und Schleuderguss, 58Cu - 39Zn - 1.2Fe - 1.0Al) | 1 | chevron_right |
| SAE AMS 4862F SAE AMS 4862F (Mangan-Bronze, Sand- und Schleuderguss, 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe, hochfest, Gusszustand) | 1 | chevron_right |
| SAE AMS 4863A SAE AMS 4863A (Gussteile aus Kupfer-Nickel-Zinn Legierung Cu – 15Ni – 8Sn isostatisch gepresst, Lösungsgeglüht und Spinodal wärmebehandelt) | 1 | chevron_right |
| SAE AMS 4870G SAE AMS 4870G (Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe, As Cast) | 1 | chevron_right |
| SAE AMS 4871H SAE AMS 4871H (Aluminium-Bronze, Schleuder- und Kokillenguss, 85Cu - 11Al - 3.6Fe lösungsgeglüht und angelassen) | 1 | chevron_right |
| SAE AMS 4873G SAE AMS 4873G (Aluminium-Bronze-Legierung, Sandguss, 85Cu - 11Al - 3.6Fe, lösungsgeglüht, angelassen) | 2 | chevron_right |
| SAE AMS 4880E SAE AMS 4880E (Aluminium-Bronze-Legierung, Schleuder- und Strangguss, 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe, abschreckgehärtet, anlassgeglüht (TQ50)) | 2 | chevron_right |
| SAE AMS 4881E SAE AMS 4881E (Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper Annealed) | 1 | chevron_right |
| SAE AMS 4890D SAE AMS 4890D (Kupfer-Beryllium-Legierung, Guss, 97Cu - 2.1Be - 0.52Co - 0.28Si, lösungsgeglüht (TB00)) | 2 | chevron_right |
| SAE AMS 4892D SAE AMS 4892D (Legierung, Guss, korrosions- und hitzebeständig, 66Ni - 29Cu - 4.0Si, Gusszustand) | 1 | chevron_right |
| SAE AMS 4893D SAE AMS 4893D (Legierung, Guss, korrosions- und hitzebeständig, 66Ni - 29Cu - 4.0Si, lösungsbehandelt) | 1 | chevron_right |
| SAE AMS 4895 SAE AMS 4895 (Titanlegierung, Rundstäbe, 5Al - 1Fe, geglüht) | 1 | chevron_right |
| SAE AMS 4897F SAE AMS 4897F (Titanium Alloy, Sheet and Strip, 15Mo - 3.0AI - 2.8Cb - 0.20Si) | 1 | chevron_right |
| SAE AMS 4898F SAE AMS 4898F (Titanlegierung, Feinblech, 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si, geglüht) | 1 | chevron_right |
| SAE AMS 4899F SAE AMS 4899F (Titanlegierung, Feinblech, Bandstahl und Grobblech, 4.5AI - 3V - 2Fe - 2Mo, geglüht) | 1 | chevron_right |
| SAE AMS 4900S SAE AMS 4900S (Titan, Feinblech, Bandstahl und Grobblech, technisch rein geglüht, 55 ksi (379 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4901V SAE AMS 4901V (Titanium Sheet, Strip, and Plate, Commercially Pure, Annealed, 70.0 ksi (485 MPa)) | 1 | chevron_right |
| SAE AMS 4902M SAE AMS 4902M (Titan, Feinblech, Bandstahl und Grobblech, technisch rein geglüht, 40.0 ksi (276 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4903E SAE AMS 4903E (Titanium Alloy Sheet, Strip, and Plate, 6Al - 4V, Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 4904E SAE AMS 4904E (Titanlegierung, Feinblech, Bandstahl und Grobblech, 6Al - 4V, lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 4905G SAE AMS 4905G (Titanlegierung, schadenstolerant, Grobblech, 6Al - 4V, extra low interstitial (ELI) beta geglüht) | 1 | chevron_right |
| SAE AMS 4907M SAE AMS 4907M (Titanlegierung, Feinblech, Bandstahl und Grobblech, 6.0Al - 4.0V, extra low interstitial (ELI) geglüht) | 1 | chevron_right |
| SAE AMS 4908G SAE AMS 4908G (Titanlegierung, Feinblech und Bandstahl, 8Mn, geglüht, 110 ksi (758 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4909M SAE AMS 4909M (Titanium Alloy, Sheet, Strip, and Plate, 5Al - 2.5Sn, Extra Low Interstitial, Annealed) | 1 | chevron_right |
| SAE AMS 4910T SAE AMS 4910T (Titanium Alloy, Sheet, Strip, and Plate, 5Al - 2.5Sn, Annealed) | 1 | chevron_right |
| SAE AMS 4911T SAE AMS 4911T (Titanium Alloy, Sheet, Strip, and Plate, 6AI - 4V, Annealed) | 1 | chevron_right |
| SAE AMS 4914J SAE AMS 4914J (Titanium Alloy, Cold Rolled Sheet and Strip, 15V - 3Al - 3Cr - 3Sn Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 4915P SAE AMS 4915P (Titanium Alloy Sheet, Strip, and Plate, 8Al - 1V - 1Mo, Single Annealed) | 1 | chevron_right |
| SAE AMS 4916M SAE AMS 4916M (Titanlegierung, Feinblech, Bandstahl und Grobblech, 8Al - 1Mo - 1V, duplex geglüht) | 1 | chevron_right |
| SAE AMS 4917L SAE AMS 4917L (Titanlegierung, Feinblech, Bandstahl und Grobblech, 13.5V - 11Cr - 3.0A, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4918R SAE AMS 4918R (Titanlegierung, Feinblech, Banstahl und Grobblech, 6AI - 6V - 2Sn, geglüht) | 1 | chevron_right |
| SAE AMS 4919K SAE AMS 4919K (Titanlegierung, Feinblech, Bandstahl und Grobblech, 6AI - 2Sn - 4Zr - 2Mo - 0.08Si, duplex geglüht) | 1 | chevron_right |
| SAE AMS 4920H SAE AMS 4920H (Titanlegierung, Schmiedestücke, 6AI - 4V, alpha-beta oder beta processiert, geglüht) | 1 | chevron_right |
| SAE AMS 4921S SAE AMS 4921S (Titanium Bars, Wire, Forgings, and Rings, Commercially Pure, 483 MPa (70 ksi) Yield Strength) | 1 | chevron_right |
| SAE AMS 4922D SAE AMS 4922D (Titanlegierung, nahtlose, hydraulische Rohre, 15V - 3.0Cr - 3.0Al - 3.0Sn, kaltumgeformt, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4923A SAE AMS 4923A (Stangen und Schmiedeteile aus Titanlegierung 2Cr - 2Fe - 2Mo geglüht, 120.000 psi Streckgrenze) | 1 | chevron_right |
| SAE AMS 4924K SAE AMS 4924K (Titanlegierung, Stäbe, Schmiedestücke und Ringe, 5Al - 2.5Sn, extra low interstitial (ELI) geglüht) | 1 | chevron_right |
| SAE AMS 4925B SAE AMS 4925B (Stangen und Schmiedeteile aus Titanlegierung 4Al-4Mn geglüht, 130.000 psi Streckgrenze) | 1 | chevron_right |
| SAE AMS 4926R SAE AMS 4926R (Titanlegierung, Stäbe, Draht und Ringe, 5Al - 2.5Sn, geglüht, 110 ksi (758 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4927 SAE AMS 4927 (Titanlegierung 5Cr-3Al) | 1 | chevron_right |
| SAE AMS 4928X SAE AMS 4928X (Titanium Alloy Bars, Wire, Forgings, Flash-Welded Rings, and Drawn Shapes, 6Al - 4V Annealed) | 1 | chevron_right |
| SAE AMS 4930M SAE AMS 4930M (Titanium Alloy Bars, Wire, Forgings, and Rings, 6Al - 4V, Extra Low Interstitial, Annealed) | 1 | chevron_right |
| SAE AMS 4931H SAE AMS 4931H (Titanium Alloy Bars, Forgings, and Rings, 6Al - 4V Extra Low Interstitial (ELI), Duplex Annealed, Fracture Toughness) | 1 | chevron_right |
| SAE AMS 4932D SAE AMS 4932D (Titanlegierung Feinblech 6Al - 4V) | 1 | chevron_right |
| SAE AMS 4933G SAE AMS 4933G (Titanlegierung, Extrusionen, stumpfgeschweißte Ringe, 8Al - 1Mo - 1V lösungsgeglüht und stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4934J SAE AMS 4934J (Titanlegierung, Extrusionen und abbrennstrumpfgeschweißte Ringe, 6Al - 4V lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 4935M SAE AMS 4935M (Titanlegierung, Extrusionen und abbrennstrumpfgeschweißte Ringe, 6Al - 4V geglüht, beta processiert) | 1 | chevron_right |
| SAE AMS 4936E SAE AMS 4936E (Titanlegierung, Extrusionen und abbrennstrumpfgeschweißte Ringe, 6Al - 6V - 2Sn, beta extrudiert und geglüht, wärmebehandelbar) | 1 | chevron_right |
| SAE AMS 4937F SAE AMS 4937F (Titanlegierung, Extrusionen, abbrennstrumpfgeschweißte Ringe, 6Al - 6V - 2Sn, beta extruded und geglüht, wärmebehandelbar) | 1 | chevron_right |
| SAE AMS 4939D SAE AMS 4939D (Titanlegierung, Feinblech, Bandblech und Grobblech, 3Al - 8V - 6Cr - 4Mo - 4Zr, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4940D SAE AMS 4940D (Titan, Feinblech, Bandstahl und Grobblech, technisch rein geglüht, 25.0 ksi (172 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4941H SAE AMS 4941H (Titanrohre, geschweißt 40 ksi (276 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4942H SAE AMS 4942H (Titanrohre, nahtlos, geglüht, 40.0 ksi (275 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4943M SAE AMS 4943M (Titanlegierung, hydraulische, nahtlose Rohre, 3.0Al - 2.5V, geglüht) | 1 | chevron_right |
| SAE AMS 4944N SAE AMS 4944N (Titanlegierung , nahtlose, hydraulische Rohre, 3.0Al - 2.5V, kaltumgeformt, spannungsarm) | 1 | chevron_right |
| SAE AMS 4945J SAE AMS 4945J (Titanlegierung, nahtlose, hydraulische Rohre, 3Al - 2.5V, kontrolliertes kontraktiles Belastungsverhältnis, kaltumgeformt, spannungsarm) | 1 | chevron_right |
| SAE AMS 4946G SAE AMS 4946G (Titanlegierung, nahtlose, hydraulische Rohre, 3Al - 2.5V, Kontrolle der Struktur, kaltumgeformt, spannungsarm) | 1 | chevron_right |
| SAE AMS 4947 SAE AMS 4947 (Titanlegierung, kaltgewalztes Blech und Band, 5Al - 1Fe, geglüht) | 1 | chevron_right |
| SAE AMS 4948 SAE AMS 4948 (Titanlegierung, warmgewalztes Blech und Band, 5Al - 1Fe, geglüht) | 1 | chevron_right |
| SAE AMS 4950F SAE AMS 4950F (Titanlegierung, Stäbe, Draht, Schmiedestücke und Ringe, 6.0Al - 4.0V, lösungsgeglüht, gealtert, modifizierte Festigkeit) | 1 | chevron_right |
| SAE AMS 4951J SAE AMS 4951J (Titan, Schweißdraht, technisch rein, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 4952G SAE AMS 4952G (Titanlegierung, Schweißdraht, 6AI - 2Sn - 4Zr - 2Mo) | 1 | chevron_right |
| SAE AMS 4953J SAE AMS 4953J (Titanlegierung, Schweißdraht, 5Al - 2.5Sn) | 1 | chevron_right |
| SAE AMS 4954K SAE AMS 4954K (Titanlegierung, Schweißdraht, 6Al - 4V) | 1 | chevron_right |
| SAE AMS 4955J SAE AMS 4955J (Titanlegierung, Schweissdraht 8AI - 1Mo - 1V) | 1 | chevron_right |
| SAE AMS 4956G SAE AMS 4956G (Titanlegierung, Schweißdraht 6Al - 4V, extra low interstitial (ELI) , umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 4957H SAE AMS 4957H (Titanlegierung, Rundstäbe und Draht, 3AI - 8V - 6Cr - 4Mo - 4Zr, Abschmelzelektroden, lösungsgeglüht, kaltgezogen) | 1 | chevron_right |
| SAE AMS 4958F SAE AMS 4958F (Titanlegierung, Stangen und Rundstäbe, 3Al - 8V - 6Cr - 4Mo - 4Zr, Abschmelzelektroden, lösungsgeglüht, Spitzenlosschleifen oder abgezogen und poliert) | 1 | chevron_right |
| SAE AMS 4959G SAE AMS 4959G (Draht aus Titanlegierung 13.5V - 11Cr - 3Al Federhärte) | 1 | chevron_right |
| SAE AMS 4960 SAE AMS 4960 (Titanlegierungspulver, Titan Ti-5553 (Ti - 5Al - 5Mo - 5V - 3Cr)) | 1 | chevron_right |
| SAE AMS 4962B SAE AMS 4962B (Titanlegierung, Investment-Feinguss, 6AL - 4V, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 4963E SAE AMS 4963E (Titanlegierung, Stäbe, Draht, Schmiedestücke und Ringe, 6.0Al - 4.0V, geglüht, wärmebehandelbar, modifizierte Festigkeit) | 1 | chevron_right |
| SAE AMS 4964D SAE AMS 4964D (Titanlegierung, Stäbe, Draht, Schmiedestücke und Ringe, 4.5Al - 3V - 2Fe - 2Mo, geglüht) | 1 | chevron_right |
| SAE AMS 4965N SAE AMS 4965N (Titanlegierung, Stäbe, Draht, Schmiedestücke, Ringe, 6.0AI - 4.0V, lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 4966S SAE AMS 4966S (Titanlegierung, Schmiedestücke, 5Al - 2.5Sn, geglüht, 110 ksi (758 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 4967N SAE AMS 4967N (Titanlegierung, Stäbe, Draht, Schmiedestücke, Ringe, 6.0Al - 4.0V, geglüht, wärmebehandelbar) | 1 | chevron_right |
| SAE AMS 4970M SAE AMS 4970M (Titanlegierung, Stäbe, Draht, Schmiedestücke, 7Al - 4Mo, lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4971M SAE AMS 4971M (Titanlegierung, Stäbe, Draht, Schmiedestücke, Ringe, 6Al - 6V - 2Sn, geglüht, wärmebehandelbar) | 1 | chevron_right |
| SAE AMS 4972K SAE AMS 4972K (Titanlegierung, Stäbe, Draht und Ringe, 8Al - 1Mo - 1V, lösungsgeglüht und stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4973K SAE AMS 4973K (Titanlegierung, Schmiedestücke, 8Al - 1Mo - 1V, lösungsgeglüht, stabilgeglüht) | 1 | chevron_right |
| SAE AMS 4974D SAE AMS 4974D (Titanlegierung, Stäbe, Schmiedestücke, 11Sn - 5.0Zr - 2.3Al - 1.0Mo - 0.21Si, lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4975R SAE AMS 4975R (Titanlegierung, Stäbe, Draht, Ringe, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si, lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4976N SAE AMS 4976N (Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.8Si Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4978K SAE AMS 4978K (Titanlegierung, Stäbe, Draht, Schmiedestücke und Ringe, 6Al - 6V - 2Sn, geglüht) | 1 | chevron_right |
| SAE AMS 4979L SAE AMS 4979L (Titanium Alloy, Bars, Wire, Forgings, and Rings, 6Al - 6V - 2Sn, Solution and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 4981J SAE AMS 4981J (Titanlegierung, Stäbe, Draht und Schmiedestücke, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 4982G SAE AMS 4982G (Titanlegierung, Draht, 44.5 Cb) | 1 | chevron_right |
| SAE AMS 4983G SAE AMS 4983G (Titanlegierung, Schmiedestücke, 10V - 2Fe - 3Al, Abschmelzelektroden, single-step lösungsgeglüht, gealtert, 180 ksi (1241 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 4984G SAE AMS 4984G (Titanlegierung, Schmiedestücke, 10V - 2Fe - 3Al, Abschmelzelektroden, lösungsgeglüht, gealtert, 173 ksi (1193 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 4985E SAE AMS 4985E (Titanlegierung, Investment-Feinguss, 6Al - 4V 130 UTS, 120 YS, 6% EL heißisostatisch gepresst, glühen optional bzw. falls vorgegeben) | 1 | chevron_right |
| SAE AMS 4986F SAE AMS 4986F (Titanlegierung, Schmiedestücke, 10V - 2Fe - 3Al, Abschmelzelektroden, single-step lösungsgeglüht, überaltert, 160 ksi (1103 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 4987G SAE AMS 4987G (Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged, 140 ksi (965 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 4988E SAE AMS 4988E (Titanlegierung, Feinblech, Bandstahl, Grobblech, 6Al - 6V - 2Sn, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 4989E SAE AMS 4989E (Titanlegierung, Feinblech, Bandstahl, Grobblech, 3Al - 2.5V, geglüht) | 1 | chevron_right |
| SAE AMS 4990E SAE AMS 4990E (Blech, Band und Platte aus Titanlegierung 6Al-6V-2Sn, Lösungsgeglüht und Ausgelagert) | 1 | chevron_right |
| SAE AMS 4991F SAE AMS 4991F (Titanlegierung, Guss, Investment-Feinguss, 6Al - 4V, heißisostatisch gepresst, Glühen optional) | 1 | chevron_right |
| SAE AMS 4992D SAE AMS 4992D (Guss, structural investment, Titanlegierung, 6Al - 4V, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 4993F SAE AMS 4993F (Titanlegierung, gemischtes Kompaktpulver, gesintert, 6Al - 4V) | 1 | chevron_right |
| SAE AMS 4994B SAE AMS 4994B (Titanlegierung, pulverförmige Metallprodukte, 6Al - 4V, heißisostatisch gepresst, geglüht) | 1 | chevron_right |
| SAE AMS 4995B SAE AMS 4995B (Blöcke und Vorformen, 5Al 2Sn 2Zr 4Cr 4Mo, Premiumqualität, Pulvermetallurgieprodukt) | 1 | chevron_right |
| SAE AMS 4996B SAE AMS 4996B (Titanlegierung, Barren und Vorformlinge, 6Al - 4V, Premiumqualität, Produkt der Pulvermetallurgie) | 1 | chevron_right |
| SAE AMS 4997B SAE AMS 4997B (Titanlegierung, Pulver, 5Al - 2Sn - 2Zr - 4Cr - 4Mo - 0.100, Premiumqualität) | 1 | chevron_right |
| SAE AMS 4998F SAE AMS 4998F (Titanlegierung, Pulver, 6Al - 4V) | 1 | chevron_right |
| SAE AMS 4999B SAE AMS 4999B (Titanlegierung, laserbeschichtete Produkte, 6Al - 4V, geglüht) | 1 | chevron_right |
| SAE AMS 5010L SAE AMS 5010L (Stahlstäbe, Automatenstahl, kaltgezogen (SAE 1212 or SAE 1215)) | 4 | chevron_right |
| SAE AMS 5020F SAE AMS 5020F (Stahlstäbe, Schmiedestücke und Rohre, Automatenstahl 1.5Mn - 0.25Pb (0.32 - 0.39C) (11L37)) | 1 | chevron_right |
| SAE AMS 5022P SAE AMS 5022P (Stahl, Stäbe, Schmiedestücke und Rohre, Automatenstahl 0.14 - 0.20C (SAE 1117)) | 2 | chevron_right |
| SAE AMS 5024J SAE AMS 5024J (Stahl, Stäbe, Schmiedestücke und Rohre, Automatenstahl 1.5Mn (0.32 - 0.39C) (SAE 1137)) | 2 | chevron_right |
| SAE AMS 5027H SAE AMS 5027H (Stahl, Schweißdraht 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) unter Vakuum geschmolzen, EnvEisenment-Controlled Packaging) | 1 | chevron_right |
| SAE AMS 5028G SAE AMS 5028G (Stahl, Schweißdraht 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC) unter Vakuum geschmolzen, EnvEisenment-Controlled Packaging) | 1 | chevron_right |
| SAE AMS 5029F SAE AMS 5029F (Stahl, Schweißdraht 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 5030K SAE AMS 5030K (Stahl, Schweißdraht 0.06 Kohlenstoff, Maximum) | 1 | chevron_right |
| SAE AMS 5031G SAE AMS 5031G (Schweißelektroden, ummantelt, Stahl 0.07 - 0.15C) | 1 | chevron_right |
| SAE AMS 5032J SAE AMS 5032J (Draht, Stahl 0.18 - 0.23C (SAE 1020) geglüht) | 2 | chevron_right |
| SAE AMS 5034B SAE AMS 5034B (Stahl, Schweißdraht 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)) | 1 | chevron_right |
| SAE AMS 5035B SAE AMS 5035B (Stahl, Schweißdraht, 0,65Si - 1,25Cr - 0,50Mo - 0,30V (0,28 - 0,33C)) | 1 | chevron_right |
| SAE AMS 5036J SAE AMS 5036J (Stahlblech und -streifen, aluminiumbeschichtet, kohlenstoffarm) | 1 | chevron_right |
| SAE AMS 5040N SAE AMS 5040N (Stahl, Feinblech and Strip 0.15 Carbon, Maximum Tiefziehgüte) | 1 | chevron_right |
| SAE AMS 5042N SAE AMS 5042N (Stahl, Feinblech and Strip 0.15 Carbon, Maximum Ziehgüte) | 1 | chevron_right |
| SAE AMS 5044L SAE AMS 5044L (Steel, Sheet and Strip, 0.15 Carbon, Maximum (SAE 1010), Half Hard Temper) | 1 | chevron_right |
| SAE AMS 5045L SAE AMS 5045L (Steel, Sheet and Strip 0.25 Carbon, Maximum (SAE 1020) Hard Temper) | 2 | chevron_right |
| SAE AMS 5046F SAE AMS 5046F (Kohlenstoffstahl, Stahlblech, Bänder und Grobbleche (SAE 1020 und 1025)) | 4 | chevron_right |
| SAE AMS 5047G SAE AMS 5047G (Stahl, Feinblech und Bandstahl 0.08 - 0.13C, aluminiumberuhigt (SAE 1010), Tiefziehgüte) | 2 | chevron_right |
| SAE AMS 5050M SAE AMS 5050M (Steel Tubing, Seamless 0.15 Carbon Maximum (SAE 1010) Annealed) | 1 | chevron_right |
| SAE AMS 5053J SAE AMS 5053J (Stahlrohre, geschweißt, 0.13 Kohlenstoff, maximal geglüht) | 1 | chevron_right |
| SAE AMS 5060J SAE AMS 5060J (Stahl, Stäbe, Schmiedestücke und Rohre 0.13 - 0.18C (SAE 1015)) | 2 | chevron_right |
| SAE AMS 5061H SAE AMS 5061H (Stahl, niedriger Kohlenstoffgehalt, Stangen und Draht 0,08 bis 0,20 C) | 1 | chevron_right |
| SAE AMS 5062J SAE AMS 5062J (Stahl, niedriger Kohlenstoffgehalt, Stäbe, Schmiedestücke, Rohre, Feinblech, Bandstahl und Grobblech 0.25 Kohlenstoff, Maximum) | 1 | chevron_right |
| SAE AMS 5069G SAE AMS 5069G (Stahlstäbe, Schmiedestücke und Rohre 0.15 - 0.20C (SAE 1018)) | 2 | chevron_right |
| SAE AMS 5070L SAE AMS 5070L (Steel, Bars, Forgings and Forging Stock, 0.18 - 0.23C (SAE 1022)) | 2 | chevron_right |
| SAE AMS 5075G SAE AMS 5075G (Stahlrohre, nahtlos 0.22 - 0.28C (SAE 1025) kaltgezogen und spannungsarm geglüht) | 2 | chevron_right |
| SAE AMS 5077G SAE AMS 5077G (Stahlrohre, geschweißt (0.22 - 0.28C) (SAE 1025) normalgeglüht oder spannungsarmgeglüht) | 2 | chevron_right |
| SAE AMS 5080K SAE AMS 5080K (Stahl, Stäbe, Schmiedestücke und Rohre 0.31 - 0.38C (SAE 1035)) | 2 | chevron_right |
| SAE AMS 5082J SAE AMS 5082J (Stahlrohre, nahtlos 0.31 - 0.38C (SAE 1035) spannungsarm geglüht) | 2 | chevron_right |
| SAE AMS 5085K SAE AMS 5085K (Stahlblech, Bänder und Grobbleche 0,48 - 0,55 C (SAE 1050)) | 2 | chevron_right |
| SAE AMS 5110K SAE AMS 5110K (Kohlenstoffstahl, Draht und Federn 0.75 - 0.88C (SAE 1080) federhart, kaltgezogen) | 2 | chevron_right |
| SAE AMS 5112N SAE AMS 5112N (Kohlenstoffstahl, Draht, Federqualität, Saitendraht 0.70 - 1.00C kaltgezogen) | 1 | chevron_right |
| SAE AMS 5115J SAE AMS 5115J (Draht, Kohlenstoffstahl 0.60 - 0.75C gehärtet und angelassen) | 1 | chevron_right |
| SAE AMS 5120P SAE AMS 5120P (Stahl, Bandstahl 0.68 - 0.80C (SAE 1074)) | 2 | chevron_right |
| SAE AMS 5121M SAE AMS 5121M (Feinblech und Bandstahl, Stahl (0.90 - 1.04C) (SAE 1095) geglüht) | 2 | chevron_right |
| SAE AMS 5122K SAE AMS 5122K (Stahl, Bandstahl (0.90 - 1.04C) (SAE 1095) hart angelassen) | 2 | chevron_right |
| SAE AMS 5132M SAE AMS 5132M (Stahl, Stäbe; 0.90 - 1.03C) | 2 | chevron_right |
| SAE AMS 5210C SAE AMS 5210C (Stahlguss, verlorene Gießform, durch elektrische Induktion geschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 5221G SAE AMS 5221G (Eisen-Nickellegierung, Stäbe 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5223H SAE AMS 5223H (Eisen-Nickellegierung, Bandstahl 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al lösungsgeglüht, kaltgewalzt, 10% Schrumpfung) | 1 | chevron_right |
| SAE AMS 5225G SAE AMS 5225G (Eisen-Nickellegierung, Bandstahl 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al lösungsgeglüht, kaltgewalzt, 50% Schrumpfung) | 1 | chevron_right |
| SAE AMS 5310G SAE AMS 5310G (Eisenguss, perlitisch formbar) | 1 | chevron_right |
| SAE AMS 5315E SAE AMS 5315E (Gusseisen mit Kugelgraphit (Sphäroguss) , Sand 60000 Psi (415 MPa) Zugfestigkeit, ferritisierend geglüht) | 1 | chevron_right |
| SAE AMS 5316E SAE AMS 5316E (Leitfähiger Eisenguss (mit Graphiteinschlüssen), Sand, 80,000 psi (550 MPa) Zugfestigkeit, Gusszustand) | 1 | chevron_right |
| SAE AMS 5328E SAE AMS 5328E (Stahlguss, verlorene Gießform 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 modifiziert) geglüht) | 1 | chevron_right |
| SAE AMS 5329F SAE AMS 5329F (Stahlguss, Sand, 0.80Cr 1.8ni 0.35Mo (0.28-0.36C) geglüht) | 1 | chevron_right |
| SAE AMS 5330E SAE AMS 5330E (Stahlguss, Feinguss 0.80Cr - 1.8Ni - 0.35Mo (0,38 - 0.46 C) (SAE 4340 geändert) geglüht) | 1 | chevron_right |
| SAE AMS 5331G SAE AMS 5331G (Stahl, Sand, Guss 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) normalgeglüht und angelassen) | 2 | chevron_right |
| SAE AMS 5333G SAE AMS 5333G (Stahl, verlorene Gussform 0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615) normalgeglüht) | 1 | chevron_right |
| SAE AMS 5334J SAE AMS 5334J (Stahl, verlorene Gussform 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) normalgeglüht und angelassen) | 1 | chevron_right |
| SAE AMS 5336J SAE AMS 5336J (Stahl, Feinguss 0,95 Cr – 0,20 Mo (0,25 – 0,35 C) (4130 Mod) normalisiert oder normalisiert und angelassen) | 1 | chevron_right |
| SAE AMS 5337E SAE AMS 5337E (Stahl, Maraging, Feinguss 18,5 Ni – 9,0 Co – 5,0 Mo – 0,70 Ti – 0,12 Al Vakuumgeschmolzen, homogenisiert, überaltert und lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5338H SAE AMS 5338H (Stahl, Feinguss 0,95 Cr – 0,20 Mo (0,35 – 0,45 C) (4140 Mod) normalisiert oder normalisiert und angelassen) | 1 | chevron_right |
| SAE AMS 5339H SAE AMS 5339H (Stahl, Maraging, Feinguss 17Ni - 10Co - 4,6Mo - 0,30Ti - 0,06Al Vakuumgeschmolzen, homogenisiert, überaltert und lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5340E SAE AMS 5340E (Stahl, korrosionsbeständig, verlorene Gussform 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu diffusionsgeglüht und lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5341D SAE AMS 5341D (Stahlguss, verlorene Gießform, korrosionsbeständig 19.5Cr - 10.5Ni - 0.25S (Type 303) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5342G SAE AMS 5342G (Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu (17-4), Homogenization, Solution, and Precipitation Heat Treated (H1100), 130 ksi (896 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5343G SAE AMS 5343G (Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu (17-4), Homogenization, Solution, and Precipitation Heat Treated (H1000), 150 ksi (1034 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5344H SAE AMS 5344H (Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization, Solution, and Precipitation Heat Treated (H900), 180 ksi (1241 MPa) Tensile Strength (17-4)) | 1 | chevron_right |
| SAE AMS 5346E SAE AMS 5346E (Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu (15-5 PH), Solution and Precipitation Heat Treated (H925), 180 ksi (1241 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5347C SAE AMS 5347C (Stahl, korrosionsbeständig, verlorene Gussform 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu lösungsgeglüht und ausgehärtet, (H1000) 150 ksi (1034 MPa) Zugfestigkeit (15-5)) | 1 | chevron_right |
| SAE AMS 5348C SAE AMS 5348C (Stahlguss, Röhrenform, schleudergegossen, Korrosionsbeständig 15Cr - 4.6Ni - 0.22 (Cb+Ta) - 2.8Cu lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5349F SAE AMS 5349F (Stahl, korrosionsbeständig, verlorene Gussform 13Cr Automatenstahl, gehärtet und angelassen) | 2 | chevron_right |
| SAE AMS 5350K SAE AMS 5350K (Stahl, korrosions- und mäßig hitzebeständig, verlorene Gussform 12.5Cr (410) gehärtet und angelassen) | 1 | chevron_right |
| SAE AMS 5351G SAE AMS 5351G (Stahlguss, Sand, korrosions- und mäßig hitzebeständig 13Cr normalgeglüht und angelassen) | 1 | chevron_right |
| SAE AMS 5352H SAE AMS 5352H (Steel, Corrosion-Resistant, Investment Castings, 17Cr - 0.55Mo (0.95 - 1.20C) (440C), Annealed) | 1 | chevron_right |
| SAE AMS 5353G SAE AMS 5353G (Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.9Ni - 0.08N (431) As Cast) | 1 | chevron_right |
| SAE AMS 5354G SAE AMS 5354G (Stahl, korrosions- und hitzebeständig, verlorene Gussform 13Cr - 2.0Ni - 3.0W gehärtet und angelassen bis 32 - 38 HRC) | 1 | chevron_right |
| SAE AMS 5355J SAE AMS 5355J (Stahl, korrosionsbeständig, verlorene Gussform 16Cr - 4.1Ni - 0.28Cb - 3.2Cu diffusionsgeglüht und lösungsgeglüht oder diffusions-, lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5356D SAE AMS 5356D (Stahl, korrosionsbeständig, verlorene Gussform 15Cr - 4.6Ni - 0.22Cb - 2.8Cu lösungsgeglüht und ausgehärtet, (H1100) 130 ksi (896 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5357E SAE AMS 5357E (Stahl, korrosionsbeständig, verlorene Gussform 15Cr - 4.6Ni - 0.22Cb - 2.8Cu lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5358D SAE AMS 5358D (Stahlguss, verlorene Gießform, korrosionsbeständig 18Cr - 9Ni lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5359E SAE AMS 5359E (Stahlguss, Sand, korrosions- und hitzebeständig 15Cr - 4.0Ni - 2.3Mo - 0.08N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5360G SAE AMS 5360G (Stahl, korrosions- und hitzebeständig, verlorene Gussform 17Cr - 13Ni - 1.9Mo lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5361G SAE AMS 5361G (Stahlguss, Sand, schleudergegossen, korrosions- und hitzebeständig 18.5Cr - 13.5Ni - 2.1Mo lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5362N SAE AMS 5362N (Stahl, Korrosions- und hitzebeständig, Feinguss 19Cr - 12Ni - 1.0Cb (Nb) Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5363F SAE AMS 5363F (Stahlguss, Sand, schleudergegossen, korrosions- und hitzebeständig 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5364D SAE AMS 5364D (Stahl, korrosions- und hitzebeständig, Feingussteile 19,5Cr - 10,5Ni - 0,65Cb (Nb) (CF-8C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5365E SAE AMS 5365E (Stahlguss, Sand, korrosions- und hitzebeständig 24.5Cr - 20.5Ni lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5366F SAE AMS 5366F (Stahl, korrosions- und hitzebeständig, verlorene Gussform 25Cr - 20Ni (CK-20) As-Cast) | 1 | chevron_right |
| SAE AMS 5368E SAE AMS 5368E (Stahl, korrosionsbeständig, verlorene Gussform 15Cr - 4.0Ni - 2.3Mo - 0.09N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5369E SAE AMS 5369E (Stahlguss, Sand, korrosions- und hitzebeständig 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.50 (Cb+Ta) - 0.32Ti lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5370E SAE AMS 5370E (Stahl, korrosions- und hitzebeständig, verlorene Gussform 19Cr - 9.5Ni (CF-3) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5371E SAE AMS 5371E (Stahlguss, Sand, korrosions- und hitzebeständig 19.5Cr - 9.5Ni (niedriger Kohlenstoffgehalt) (304L) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5372D SAE AMS 5372D (Stahlguss, Sand, korrosionsbeständig 16Cr - 1.9Ni (Type 431 Mod) normalgeglüht und angelassen) | 1 | chevron_right |
| SAE AMS 5373E SAE AMS 5373E (Legierung, Guss, Sandguss, korrosions- und hitzebeständig, 16Co - 29Cr - 4.5W, Gusszustand) | 1 | chevron_right |
| SAE AMS 5375F SAE AMS 5375F (Aluminium-Gussteile, Feinguss, Korrosions- und hitzebeständig 65.5Co - 25Cr - 1.8Ni - 5.0W Gusszustand) | 1 | chevron_right |
| SAE AMS 5376J SAE AMS 5376J (Alloy, Corrosion- and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155) As Cast) | 1 | chevron_right |
| SAE AMS 5377H SAE AMS 5377H (Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 73Ni - 12Cr - 4.5Mo - 2.0Cb (Nb) - 0.70Ti - 0.05C - 6.0Al - 0.010 - 0.10Zr (IN-713 - Low Carbon) Vacuum Cast, As-Cast) | 1 | chevron_right |
| SAE AMS 5378F SAE AMS 5378F (Aluminium-Gussteile, Feinguss, Korrosions- und hitzebeständig 65.5Co - 25Cr - 1.8Ni - 5.0W Gusszustand) | 1 | chevron_right |
| SAE AMS 5380H SAE AMS 5380H (Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo (Stellite 30) As-Cast) | 1 | chevron_right |
| SAE AMS 5382L SAE AMS 5382L (Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W (Stellite 31) As-Cast) | 1 | chevron_right |
| SAE AMS 5383F SAE AMS 5383F (Nickel-Legierung, Korrosions- und hitzebeständig, Feinguss 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vakuum geschmolzene Homogenisierung und lösungsgeglüht.) | 1 | chevron_right |
| SAE AMS 5384F SAE AMS 5384F (Alu-Guss, Feinguss, Korrosions- und hitzebeständig 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vakuum geschmolzen, Vakuum-Druckguss, lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 5385J SAE AMS 5385J (Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo (Stellite 21) As-Cast) | 1 | chevron_right |
| SAE AMS 5387F SAE AMS 5387F (Legierung, korrosions- und hitzebeständig, Feinguss; 60Co - 29Cr - 4,5W; Als Besetzung) | 1 | chevron_right |
| SAE AMS 5388L SAE AMS 5388L (Nickellegierung, korrosions- und hitzebeständig, Investment-Feinguss, 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), Gusszustand) | 1 | chevron_right |
| SAE AMS 5389D SAE AMS 5389D (Legierungsgüsse, Sand, Korrosions- und Hitzeresistent 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5390H SAE AMS 5390H (Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (Hastelloy X) As-Cast) | 1 | chevron_right |
| SAE AMS 5391J SAE AMS 5391J (Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb (Nb) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr (IN-713) Vacuum Cast, As-Cast) | 1 | chevron_right |
| SAE AMS 5392M SAE AMS 5392M (Legierung, Eisenguss, Sand, mäßig korrosions- und hitzebeständig 2.1Cr - 15Ni - 6.5Cu (2.4 - 2.8C) Gusszustand) | 1 | chevron_right |
| SAE AMS 5393G SAE AMS 5393G (Legierung, Eisenguss, Sand, mäßig korrosions- und hitzebeständig 2.0Cr - 2.0Ni (2.4 - 2.8C) spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 5394D SAE AMS 5394D (Legierung, Eisenguss, leitfähig, Sand, korrosions- und hitzebeständig 2.0Cr - 20Ni (2.4 - 3.0C) spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 5395D SAE AMS 5395D (Legierung, Eisenguss, leitfähig, Sand, korrosionsbeständig 22Ni (2.5 - 3.0C) Gusszustand) | 1 | chevron_right |
| SAE AMS 5396G SAE AMS 5396G (Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV and Hastelloy B) As-Cast) | 1 | chevron_right |
| SAE AMS 5397G SAE AMS 5397G (Nickel Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr (IN-100) Vacuum Melted, Vacuum Cast, As Cast) | 1 | chevron_right |
| SAE AMS 5398H SAE AMS 5398H (Stahl, korrosionsbeständig, Sand, Schleuderguss 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5399D SAE AMS 5399D (Nickel Legierung, Korrosions- und hitzebeständig, Feinguss 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vakuum geschmolzen, Vakuum-Druckguss, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5400D SAE AMS 5400D (Stahl, korrosionsbeständig, Feinguss; 15Cr - 4,6Ni - 0,22Cb - 2,8Cu; Lösungs- und ausscheidungswärmebehandelt (H935); 170 ksi (1172 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5401C SAE AMS 5401C (Nickel-Legierung, Korrosions- und hitzebeständig,Feinguss 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vakuum geschmolzen, Vakuumguss Gusszustand) | 1 | chevron_right |
| SAE AMS 5402D SAE AMS 5402D (Nickel-Legierung, Korrosions- und hitzebeständig,Feinguss 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Gusszustand) | 1 | chevron_right |
| SAE AMS 5403B SAE AMS 5403B (Aluminiumguss, Feinguss, Korrosions- und hitzebeständig 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vakuum geschmolzen, Vakuumguss) | 1 | chevron_right |
| SAE AMS 5404B SAE AMS 5404B (Aluminiumguss, Feinguss, Korrosions- und hitzebeständig 59Ni - 6Cr - 0Co - 12.9Mo - 9.2W - 1.0Ti - 4.2Ta Vakuum geschmolzen, Vakuum-Druckguss, lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 5405B SAE AMS 5405B (Aluminiumguss, Feinguss, Korrosions- und hitzebeständig 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vakuum geschmolzen, Vakuumguss) | 1 | chevron_right |
| SAE AMS 5406B SAE AMS 5406B (Aluminiumguss, Feinguss, Korrosions- und hitzebeständig 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vakuum geschmolzen, Vakuumguss Gusszustand) | 1 | chevron_right |
| SAE AMS 5407B SAE AMS 5407B (Aluminiumguss, Feinguss, Korrosions- und hitzebeständig 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vakuum geschmolzen, Vakuumguss, Gusszustand) | 1 | chevron_right |
| SAE AMS 5408B SAE AMS 5408B (Legierungsgüsse, zentrifugal, Korrosions- und Hitzeresistent 64Ni - 16Cr - 15Mo - 0.30Al - 0.05La lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5409A SAE AMS 5409A (Aluminiumguss, Feinguss, Korrosions- und hitzebeständig 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vakuum geschmolzen, Vakuumguss Gusszustand) | 1 | chevron_right |
| SAE AMS 5410C SAE AMS 5410C (Nickellegierung, korrosions- und hitzebeständig, Feinguss 61Ni - 16Cr - 8,5Co - 1,8Mo - 2,6W - 0,85Cb (Nb) - 3,4Ti - 1,8Ta - 3,4Al - 0,010B - 0,05Zr Vakuumgeschmolzen, Vakuumguss, As Gegossen oder lösungsbehandelt oder lösungs- und ausscheidungsgehärtet) | 1 | chevron_right |
| SAE AMS 5412B SAE AMS 5412B (Stahlguss, unter Vakuum geschmolzen und gegossen, verlorene Gussform, korrosionsbeständig 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195,000 psi (1344 MPa) Zugfestigkeit (Bedingung H1000), diffusionsgeglüht, Lösung, ausgehärtet) | 1 | chevron_right |
| SAE AMS 5441C SAE AMS 5441C (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe, Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W, umgeschmolzen mit Abschmelzektroden oder Vakuum-Induktions-Schmelzverfahren, 1775 °F (968 °C), lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5442B SAE AMS 5442B (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe, Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W, umgeschmolzen mit Abschmelzelektroden oder Vakuum-Induktions-Schmelzverfahren, 1775 °F (968 °C), lösungsgeglüht, ausgehärtet) | 1 | chevron_right |
| SAE AMS 5500H SAE AMS 5500H (Steel, Corrosion-Resistant, Laminated, Sheet, Surface Bonded (SAE 302)) | 1 | chevron_right |
| SAE AMS 5501G SAE AMS 5501G (Steel, Corrosion-Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5503G SAE AMS 5503G (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 17Cr (SAE 51430) geglüht) | 1 | chevron_right |
| SAE AMS 5504P SAE AMS 5504P (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 12.5Cr (410) geglüht) | 1 | chevron_right |
| SAE AMS 5505G SAE AMS 5505G (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 12Cr (410 modifiziert) Kontrolle bzgl. Ferritstruktur, geglüht) | 1 | chevron_right |
| SAE AMS 5506H SAE AMS 5506H (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 13Cr (0.30 - 0.40C) (420) geglüht) | 1 | chevron_right |
| SAE AMS 5507J SAE AMS 5507J (Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (316L) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5508H SAE AMS 5508H (Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 13Cr - 2.0Ni - 3.0W (Greek Ascoloy), Annealed) | 1 | chevron_right |
| SAE AMS 5510T SAE AMS 5510T (Stahl, korrosions- und hitzebeständig, Feinblech, Bandblech und Grobblech 18Cr - 10.5Ni - 0.40Ti (SAE 30321) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5511L SAE AMS 5511L (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 19Cr - 9.5Ni (304L) lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5512N SAE AMS 5512N (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 18Cr - 10.5Ni - 0.80Cb (347) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5513L SAE AMS 5513L (Stahl, korrosionsbeständig, Blech, Band und Platte; 19Cr - 9,2 Ni (SAE 30304); Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5514J SAE AMS 5514J (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 18Cr - 11.5Ni (305) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5515P SAE AMS 5515P (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 18Cr - 8.5Ni (302) lösungsgeglüht, hohe Leitfähigkeit) | 1 | chevron_right |
| SAE AMS 5516S SAE AMS 5516S (Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5517N SAE AMS 5517N (Stahl, korrosionsbeständig, Feinblech und Bandstahl 18Cr - 8Ni (301) kaltgewalzt, 125 ksi (862 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5518P SAE AMS 5518P (Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5519R SAE AMS 5519R (Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5520H SAE AMS 5520H (Stahl, korrosions- und hitzebeständig, Bleche, Bänder, Folien und Platten 15Cr - 7,1 Ni - 2,5 Mo - 1,1 Al Lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5521K SAE AMS 5521K (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 25Cr - 20Ni (SAE 30310S) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5523H SAE AMS 5523H (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 23Cr - 13.5Ni (309S) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5524P SAE AMS 5524P (Steel, Corrosion- and Heat-Resistant, Sheet, Strip and Plate, 18Cr - 13Ni - 2.5Mo (SAE 316), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5525L SAE AMS 5525L (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5526J SAE AMS 5526J (Stahl, Feinblech, Bandstahl und Grobblech, korrosions- und hitzebeständig 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb+Ta) - 0.22Ti lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5528K SAE AMS 5528K (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 17Cr - 7.1Ni - 1.1Al (Legierung 17-7) lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5529L SAE AMS 5529L (Stahl, korrosionsbeständig, Feinblech und Bandstahl 17Cr - 7.1Ni - 1.1Al (Legierung 17-7) lösungsgeglüht und kaltgewalzt, aushärtbar) | 1 | chevron_right |
| SAE AMS 5530H SAE AMS 5530H (Legierungsblech, Streifen und Grobblech, Korrosions- und Hitzeresistent 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5532J SAE AMS 5532J (Eisenlegierung, korrosions- und hitzebeständig, Bleche, Bänder und Platten; 30Fe - 21Cr - 20Ni - 20Co - 3,0Mo - 2,5W - 1,0Cb(Nb) - 0,15N; Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5536R SAE AMS 5536R (Nickellegierung, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Legierung X oder HX) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5537K SAE AMS 5537K (Kobaltlegierung, korrosions- und hitzebeständig, Feinblech, Bandstahl, Metallfolie und Grobblech, 52Co - 20Cr - 10Ni - 15W, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5540R SAE AMS 5540R (Nickellegierung, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech, 74Ni - 15.5Cr - 8.0Fe, geglüht) | 1 | chevron_right |
| SAE AMS 5541J SAE AMS 5541J (Nickellegierung, korrosions- und hitzebeständig, Blech und Band 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe (Legierung 722) geglüht) | 1 | chevron_right |
| SAE AMS 5542R SAE AMS 5542R (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Band und Grobblech 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) geglüht) | 1 | chevron_right |
| SAE AMS 5544L SAE AMS 5544L (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Streifen und Grobblech 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B, mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 5545H SAE AMS 5545H (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Streifen und Grobblech 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vakuuminduktions- und mit abschmelzender Elektrode geschmolzen, Lösungsgeglüht Ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5546E SAE AMS 5546E (Stahl, Feinblech und Bandblech, korrosions- und mäßig hitzebeständig 16.5Cr - 4.5Ni - 2.9Mo - 0.10N kaltgewalzt, angelassen) | 1 | chevron_right |
| SAE AMS 5547J SAE AMS 5547J (Stahl, korrosions- und hitzebeständig, Feinblech und Bandblech 15.5Cr - 4.5Ni - 2.9Mo - 0.10N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5548R SAE AMS 5548R (Stahl, Korrosions- und Hitzeresistent, Blech und Band 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 bis 1975°F (1010 bis 1079°C) Geglüht) | 1 | chevron_right |
| SAE AMS 5549H SAE AMS 5549H (Stahl, korrosions- und hitzebeständig, Grobblech 15.5Cr - 4.5Ni - 2.9Mo - 0.10N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5550F SAE AMS 5550F (Legierungsblech, Band und Blech, Korrosions- und Hitzeresistent 80Ni - 15.5Cr - 0.62Ti - 3.25Al geglüht) | 1 | chevron_right |
| SAE AMS 5552H SAE AMS 5552H (Legierung, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 46Fe - 20.5Cr - 32Ni - 1.1Ti geglüht) | 1 | chevron_right |
| SAE AMS 5553J SAE AMS 5553J (Nickel, Blech und Band niedriger (0.02 max) Kohlenstoffgehalt, geglüht) | 1 | chevron_right |
| SAE AMS 5554H SAE AMS 5554H (Stahl, korrosions- und hitzebeständiges, nahtloses Rohr 16,5 Cr – 4,5 Ni – 2,9 Mo – 0,10 N Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5555G SAE AMS 5555G (Nickeldraht und -band 99Ni) | 1 | chevron_right |
| SAE AMS 5556K SAE AMS 5556K (Stahl, korrosions- und hitzebeständige, nahtlose oder geschweißte Hydraulikschläuche 18Cr - 11Ni - 0,70Cb (347) Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5557K SAE AMS 5557K (Stahl, korrosions- und hitzebeständig, nahtloses oder geschweißtes Hydraulikrohr 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5558J SAE AMS 5558J (Stahl, korrosions- und hitzebeständig, geschweißte Rohre 18Cr - 10,5Ni - 0,70Cb (Nb) (347) Dünnwandig lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5559K SAE AMS 5559K (Stahl, korrosions- und hitzebeständiges, geschweißtes Rohr 18Cr - 10,5 Ni - 0,40 Ti (SAE 30321), dünnwandig, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5560P SAE AMS 5560P (Stahl, korrosionsbeständig, nahtlose Rohre; 19Cr - 10Ni (304); Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5561H SAE AMS 5561H (Stahl, korrosions- und hitzebeständig, geschweißtes und gezogenes oder nahtloses und gezogenes Rohr 9.0Mn - 20Cr - 6.5Ni - 0.28N Hochdruckhydraulik) | 1 | chevron_right |
| SAE AMS 5562F SAE AMS 5562F (Stahl, korrosions- und hitzebeständig, nahtlose Rohre 9.0Mn - 20Cr - 6.5Ni - 0.28N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5563D SAE AMS 5563D (Stahl, korrosionsbeständig, nahtlos oder geschweißtes Rohr 19Cr - 9.5Ni (SAE 30304) kaltgezogen, ¼ hart angelassen) | 1 | chevron_right |
| SAE AMS 5564D SAE AMS 5564D (Stahl, korrosionsbeständig, Rohr 19Cr - 10Ni Hochdruck-hydraulisch, geschweißt und mit Ultraschall geprüft oder nahtlos kaltgezogen, 1/8 hart angelassen) | 1 | chevron_right |
| SAE AMS 5565M SAE AMS 5565M (Stahl, korrosionsbeständig, geschweißte Rohre 19Cr - 9.5Ni (304) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5566N SAE AMS 5566N (Stahl, korrosionsbeständig, nahtlos oder geschweißt Hydraulikrohre 19Cr - 10Ni (304) Hochdruck, kaltgezogen) | 1 | chevron_right |
| SAE AMS 5567G SAE AMS 5567G (Stahl, korrosionsbeständige, nahtlose oder geschweißte Hydraulikrohre 19Cr - 10Ni (304) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5568J SAE AMS 5568J (Stahl, korrosions- und hitzebeständig, geschweißtes Rohr 17Cr - 7.1Ni - 1.1Al lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5569C SAE AMS 5569C (Stahl, korrosions- und hitzebeständig, nahtlose und geschweißte Hydraulikrohre 19Cr - 9.5Ni - 0.03C max kaltgezogen, 1/8 hart angelassen) | 1 | chevron_right |
| SAE AMS 5570R SAE AMS 5570R (Stahl, korrosions- und hitzebeständige, nahtlose Rohre 18Cr - 11Ni - 0,40Ti (321) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5571K SAE AMS 5571K (Stahl, korrosions- und hitzebeständig, nahtloses Rohr 18Cr - 10.5Ni - 0.70Cb (Nb) (347) lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5572J SAE AMS 5572J (Stahl, korrosions- und hitzebeständig, nahtloses Rohr 25Cr - 20Ni (SAE 30310S) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5573M SAE AMS 5573M (Stahl, korrosions- und hitzebeständig, nahtloses Rohr 17Cr - 12Ni - 2.5Mo (SAE 30316) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5574F SAE AMS 5574F (Stahl, korrosions- und hitzebeständige, nahtlose Rohre 23Cr - 13,5Ni (309S) -Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5575R SAE AMS 5575R (Stahl, korrosions- und hitzebeständige, geschweißte Rohre; 18Cr - 10,5Ni - 0,70Cb (Nb) (347); Lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5576M SAE AMS 5576M (Stahl, korrosions- und hitzebeständig, geschweißtes Rohr 18Cr - 10.5Ni - 0.40Ti (321) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5577J SAE AMS 5577J (Stahl, korrosions- und hitzebeständig, geschweißtes Rohr 25Cr - 20Ni (310) lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5578H SAE AMS 5578H (Stahl, korrosions- und hitzebeständig, geschweißtes Rohr 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5579D SAE AMS 5579D (Stahl, korrosions- und hitzebeständig, geschweißtes Rohr 19.5Cr - 9.5Ni - 1.4Mo -1.4W - 0.42(Cb + Ta) - 0.22Ti dünnwandig) | 1 | chevron_right |
| SAE AMS 5580M SAE AMS 5580M (Nickellegierung, korrosions- und hitzebeständig, nahtlose Rohre 74Ni - 15.5Cr - 8.0Fe geglüht) | 1 | chevron_right |
| SAE AMS 5581G SAE AMS 5581G (Nickellegierung, Korrosions- und Hitzeresistent, Nahtlose oder geschweisste Rohre 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb), geglüht) | 1 | chevron_right |
| SAE AMS 5582H SAE AMS 5582H (Nickellegierung, korrosions- und hitzebeständig, nahtlose Rohre 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750), lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5583G SAE AMS 5583G (Nickellegierung, korrosions- und hitzebeständig, nahtlose Rohre 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) Vakuumgeschmolzen, lösungsgeglüht, ausscheidungshärtbar bis 170 ksi (1172 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5584B SAE AMS 5584B (Stahl, korrosions- und hitzebeständige, nahtlose und geschweißte Hydraulikschläuche; 17Cr - 12Ni - 1,5Mo - 0,03C max.; Kaltgezogen, 1/8 Härtegrad) | 1 | chevron_right |
| SAE AMS 5585J SAE AMS 5585J (Stahllegierung, korrosions- und hitzebeständig, geschweißte Rohre 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15N Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5586J SAE AMS 5586J (Nickel Alloy, Corrosion- and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr (Waspaloy) Consumable Electrode Remelted or Vacuum Induction Melted, Annealed) | 1 | chevron_right |
| SAE AMS 5587G SAE AMS 5587G (Nickellegierung, Korrosions- und Hitzeresistent, Nahtlose Rohre 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5588H SAE AMS 5588H (Nickellegierung, Korrosions- und Hitzeresistent, Geschweisste Rohre 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5589H SAE AMS 5589H (Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel 718), Consumable Electrode Remelted or Vacuum Induction Melted 1775°F (968°C) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5590G SAE AMS 5590G (Nickellegierung, korrosions- und hitzebeständig, nahtloses Rohr, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe, Abschmelzelektroden oder Vakuum-Induktions-Schmelzverfahren, 1950 °F (1066 °C), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5591M SAE AMS 5591M (Stahl, korrosions- und hitzebeständig, Rohre, nahtlos, 12.5Cr, (410), geglüht) | 1 | chevron_right |
| SAE AMS 5592H SAE AMS 5592H (Iron-Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si (Alloy 330) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5593J SAE AMS 5593J (Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe, (RA333), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5595H SAE AMS 5595H (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 9.0Mn - 20Cr - 6.5Ni - 0.28N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5596N SAE AMS 5596N (Nickellegierung, korrosions- und hitzebeständig, Feinblech, Bandstahl, Metallfolie und Grobblech, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe, umgeschmolzen mit Abschmelzelektroden oder Vakuum-Induktions-Schmelzverfahren, 1775 °F (968 °C), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5597H SAE AMS 5597H (Nickellegierung, korrosions- und hitzebeständig, Bleche, Bänder und Platten 52,5 Ni – 19 Cr – 3,0 Mo – 5,1 Cb (Nb) – 0,90 Ti – 0,50 Al – 18 Fe Verbrauchselektrode oder vakuuminduktionsgeschmolzene Lösung bei 1066 °C (1950 °F). Hitzebehandelt) | 1 | chevron_right |
| SAE AMS 5598G SAE AMS 5598G (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Band und Grobblech 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe (X750) Mit abschmelzender Elektrode umgeschmolzen oder Vakuuminduktionsgeschmolzen, lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5599J SAE AMS 5599J (Nickellegierung, korrosions- und hitzebeständig, Blech, Band und Platte 62Ni - 21,5Cr - 9,0Mo - 3,7 Cb (Nb) geglüht) | 1 | chevron_right |
| SAE AMS 5600G SAE AMS 5600G (Stahl, korrosionsbeständig, Feinblech, beschichtet, Kantenverbindung) | 1 | chevron_right |
| SAE AMS 5603E SAE AMS 5603E (Feinblech und Bandstahl 15Cr - 8,4Ni - 2,2Mo - 1,1Al, Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5604K SAE AMS 5604K (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb lösungsgeglüht, aushärtbar) | 2 | chevron_right |
| SAE AMS 5605H SAE AMS 5605H (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Band und Grobblech 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen 1800 °F (982°C) lösungsgeglüht (Legierung 706)) | 1 | chevron_right |
| SAE AMS 5606G SAE AMS 5606G (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Band und Grobblech 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti, Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen 1750°F (954°C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5607H SAE AMS 5607H (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Band und Grobblech 73Ni - 7.0Cr - 16.5Mo lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5608H SAE AMS 5608H (Kobaltlegierung, Korrosions- und Hitzeresistent, Blech, Band und Grobblech 40Co - 22Cr - 22Ni - 14.5W - 0.07La, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5609F SAE AMS 5609F (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Material für Schmiedestücke und Ringe 12Cr - 0.12Cb (Nb) (410 Modified), Kontrolle bzgl. Ferritstruktur, geglüht) | 1 | chevron_right |
| SAE AMS 5610R SAE AMS 5610R (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke und Schmiederohlinge 12.5Cr - niedriger Kohlenstoffgehalt (SAE 51416, 51416Se), Automatenstahl) | 2 | chevron_right |
| SAE AMS 5611G SAE AMS 5611G (Stahl, korrosions- und hitzebeständig, Stangen, Draht, Schmiedestücke, Schmiede- und Ringmaterial, mechanische Rohre und Ringe 12Cr-Ferrit-kontrolliert, geglüht, geschmolzene Verbrauchselektrode) | 1 | chevron_right |
| SAE AMS 5612L SAE AMS 5612L (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke und blitzgeschweißte Ringe, 12Cr (410), Flugzeugqualität, ferritgesteuert, geglüht) | 1 | chevron_right |
| SAE AMS 5613T SAE AMS 5613T (Steel, Corrosion- and Heat Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings, 12.5Cr (SAE 410), Aircraft Quality, Annealed) | 1 | chevron_right |
| SAE AMS 5614G SAE AMS 5614G (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke und Schmiedevormaterial 12Cr - 0.50Mo (410 plus Mo), geglüht) | 1 | chevron_right |
| SAE AMS 5616N SAE AMS 5616N (Stahl, korrosions- und hitzebeständig, Stangen, Drähte, Schmiedeteile, mechanische Rohre und Ringe 13Cr - 2.0Ni - 3.0W geglüht) | 1 | chevron_right |
| SAE AMS 5617L SAE AMS 5617L (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorprodukte 12Cr - 8,5Ni - 1,2Ti - 2,0Cu Vakuum-Induktions- plus Vakuum-Abschmelzelektroden-Schmelzverfahren, lösungsgeglüht, aushärtbar) | 2 | chevron_right |
| SAE AMS 5618K SAE AMS 5618K (Stahl, korrosionsbeständig, Stäbe, Draht und Schmiedestücke 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) Abschmelzelektroden im Vakuum) | 1 | chevron_right |
| SAE AMS 5619A SAE AMS 5619A (Stangen und Schmiedestücke aus Stahl, Korrosionsbeständig 14Cr - 4, 0Mo (1,00-1, 10C)) | 1 | chevron_right |
| SAE AMS 5620J SAE AMS 5620J (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorprodukte 13Cr (0.30 - 0.40C) (420F, 420FSe) Automatenstahl, geglüht) | 2 | chevron_right |
| SAE AMS 5621H SAE AMS 5621H (Stahl, korrosionsbeständig, Stäbe, Draht und Schmiedestücke 13Cr (0,30-0,40C) (51420) geglüht) | 1 | chevron_right |
| SAE AMS 5622/H1025A SAE AMS 5622/H1025A (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardened (H1025) Consumable Electrode Remelted) | 1 | chevron_right |
| SAE AMS 5622/H1075 SAE AMS 5622/H1075 (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H1075)) | 1 | chevron_right |
| SAE AMS 5622/H1100 SAE AMS 5622/H1100 (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H1100)) | 1 | chevron_right |
| SAE AMS 5622/H1150 SAE AMS 5622/H1150 (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H1150)) | 1 | chevron_right |
| SAE AMS 5622/H900A SAE AMS 5622/H900A (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H900)) | 1 | chevron_right |
| SAE AMS 5622/H925A SAE AMS 5622/H925A (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H925)) | 1 | chevron_right |
| SAE AMS 5622H SAE AMS 5622H (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forging, Rings and Heading, 16Cr - 4.0Ni - 0.30Cb - 4.0Cu (17-4 PH) Solution Heat Treated, Precipitation Hardenable, Premium Aircraft Quality, Consumable Electrode Remelted) | 2 | chevron_right |
| SAE AMS 5623D SAE AMS 5623D (Stahlstäbe und Schmiedestücke, große Ausdehnung 9.5Ni - 5.5Mn (0.55 - 0.65C) geglüht) | 1 | chevron_right |
| SAE AMS 5624F SAE AMS 5624F (Stahlstäbe, hohe Ausdehnung 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) kaltgeformt) | 1 | chevron_right |
| SAE AMS 5625E SAE AMS 5625E (Stahlstäbe, hohe Ausdehnung 9.5Ni - 5.5Mn (0.55 - 0.65C) kaltgeformt) | 1 | chevron_right |
| SAE AMS 5626E SAE AMS 5626E (Stahlstäbe und Schmiedestücke, Werkzeuge, Hochgeschwindigkeit, 4.1Cr 18W 1.1V) | 2 | chevron_right |
| SAE AMS 5627J SAE AMS 5627J (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke und blitzgeschweißte Ringe 17Cr (430), geglüht) | 1 | chevron_right |
| SAE AMS 5628G SAE AMS 5628G (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing and Forging Stock, 16Cr - 2.5Ni (SAE 51431), Aircraft Quality) | 1 | chevron_right |
| SAE AMS 5629/H1000B SAE AMS 5629/H1000B (Stahl, Korrosionsresistent, Stangen, Drähte, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuuminduktionsgeschmolzen plus mit abschmelzender Elektrode geschmolzen, lösungsgeglüht, ausscheidungsgehärtet (H1000)) | 1 | chevron_right |
| SAE AMS 5629/H1025 SAE AMS 5629/H1025 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, ausscheidungsgehärtet (H1025)) | 1 | chevron_right |
| SAE AMS 5629/H1050 SAE AMS 5629/H1050 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, ausscheidungsgehärtet (H1050)) | 1 | chevron_right |
| SAE AMS 5629/H1100 SAE AMS 5629/H1100 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, ausscheidungsgehärtet (H1100)) | 1 | chevron_right |
| SAE AMS 5629/H1150 SAE AMS 5629/H1150 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, ausscheidungsgehärtet (H1150)) | 1 | chevron_right |
| SAE AMS 5629/H950A SAE AMS 5629/H950A (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, ausscheidungsgehärtet (H950)) | 1 | chevron_right |
| SAE AMS 5629K SAE AMS 5629K (Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al (PH 13-8 Mo), Vacuum Induction Plus Consumable Electrode Melted, Premium Aircraft-Quality, Solution Heat Treated, Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5630M SAE AMS 5630M (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedematerial, 17Cr - 0,52Mo (0,95 - 1,20C) (440C)) | 1 | chevron_right |
| SAE AMS 5631G SAE AMS 5631G (Stahl, korrosionsbeständig, Stäbe, Schmiedestücke und Schmiedevorprodukte 17Cr (0.60 - 0.75C) (440A)) | 1 | chevron_right |
| SAE AMS 5632K SAE AMS 5632K (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorformen 17Cr - 0.50Mo (0.95 - 1.20C) (440F) Automatenstahl, geglüht) | 2 | chevron_right |
| SAE AMS 5635H SAE AMS 5635H (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorprodukte 18Cr - 9Ni - 0.21Pb (303Pb) Automatenstahl, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5636H SAE AMS 5636H (Stahl, korrosionsbeständig, Stangen und Draht 18Cr - 9.0Ni (302) lösungsgeglüht und kaltgezogen Zugfestigkeit 100 ksi (689 MPa)) | 1 | chevron_right |
| SAE AMS 5637K SAE AMS 5637K (Stahl, korrosionsbeständig, Stäbe und Draht 18Cr - 9.0Ni (302) lösungsgeglüht, kaltgezogen und spannungsarmgeglüht, 125 ksi (862 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5638G SAE AMS 5638G (Stahl, korrosionsbeständig, Stäbe and Schmiedestücke 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303MA) Automatenstahl, Gesenkschmieden oder Stauchen, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5639K SAE AMS 5639K (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, Rohre, Ringe und Schmiede- und Ringmaterial 19Cr - 10Ni, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5640W SAE AMS 5640W (Stahl, korrosionsbeständig, Stäbe, Draht und Schmiedestücke 18Cr - 9.0Ni Automatenstahl) | 3 | chevron_right |
| SAE AMS 5641K SAE AMS 5641K (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedematerial 18.5Cr - 10Ni - 0.22Se (303Se) frei bearbeitbar; zum Gesenkschmieden oder Stauchen lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5642N SAE AMS 5642N (Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 18Cr - 10.5Ni - 0.60Cb (347F, 347FSe) Free-Machining, Solution Heat Treated) | 2 | chevron_right |
| SAE AMS 5643/H1025B SAE AMS 5643/H1025B (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre und Ringe; 16Cr – 4,0 Ni – 0,30 Cb (Nb) – 4,0 Cu; Lösungs- und ausscheidungsgeglüht (H1025)) | 1 | chevron_right |
| SAE AMS 5643/H1075 SAE AMS 5643/H1075 (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre und Ringe; 16Cr – 4,0 Ni – 0,30 Cb (Nb) – 4,0 Cu; Lösungs- und ausscheidungsgeglüht (H1075)) | 1 | chevron_right |
| SAE AMS 5643/H1100A SAE AMS 5643/H1100A (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre und Ringe; 16Cr – 4,0 Ni – 0,30 Cb (Nb) – 4,0 Cu; Lösungs- und ausscheidungsgeglüht (H1100)) | 1 | chevron_right |
| SAE AMS 5643/H1150A SAE AMS 5643/H1150A (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre und Ringe; 16Cr – 4,0 Ni – 0,30 Cb (Nb) – 4,0 Cu; Lösungs- und ausscheidungsgeglüht (H1150)) | 1 | chevron_right |
| SAE AMS 5643/H900A SAE AMS 5643/H900A (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre und Ringe; 16Cr – 4,0 Ni – 0,30 Cb (Nb) – 4,0 Cu; Lösungs- und ausscheidungsgeglüht (H900)) | 1 | chevron_right |
| SAE AMS 5643/H925A SAE AMS 5643/H925A (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre und Ringe; 16Cr – 4,0 Ni – 0,30 Cb (Nb) – 4,0 Cu; Lösungs- und ausscheidungsgeglüht (H925)) | 1 | chevron_right |
| SAE AMS 5643W SAE AMS 5643W (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre und Ringe 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Lösungsgeglüht, ausscheidungshärtbar) | 2 | chevron_right |
| SAE AMS 5644E SAE AMS 5644E (Stahlstäbe und Schmiedestücke, korrosions- und hitzebeständig 17Cr - 7Ni - 1Al) | 1 | chevron_right |
| SAE AMS 5645T SAE AMS 5645T (Stahl, korrosions- und hitzebeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre, Ringe und Schmiedematerial; 18Cr - 10Ni - 0,40Ti (321); Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5646R SAE AMS 5646R (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Schmiedestücke 18Cr - 11Ni - 0,60Cb(Nb) (347) lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5647M SAE AMS 5647M (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, mechanische Rohre, Ringe und Schmiedematerial; 19Cr - 9,5Ni; Lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5648N SAE AMS 5648N (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Lager für Schmiedestücke und Ringe 17Cr - 12Ni - 2.5Mo (316) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5649J SAE AMS 5649J (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke und Vormaterial für Schmiedestücke, 18Cr - 13Ni - 2.1Mo (316FM) Automatenstahl, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5650G SAE AMS 5650G (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, Rohre und Ringe 23Cr - 13.5Ni (309S) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5651L SAE AMS 5651L (Stahl, korrosions- und hitzebeständig, Stangen, Draht, Schmiedeteile, Rohre, Ringe und Halbzeug für Schmiedeteile und Ringe, 25Cr - 20Ni (310), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5652K SAE AMS 5652K (Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Stock for Forgings and Rings, 25Cr - 20Ni - 2.0Si (314), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5653K SAE AMS 5653K (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, Rohre, Ringe und Halbzeug für Schmiedestücke und Ringe 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5654H SAE AMS 5654H (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Schmiedevorprodukte 18Cr - 11Ni - 0.60 Cb (Nb) (347) Premium Flugzeugqualität, Abschmelzelektroden, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5655G SAE AMS 5655G (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke und Schmiedematerial 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Gehärtet und angelassen) | 1 | chevron_right |
| SAE AMS 5656G SAE AMS 5656G (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedeteile, Strangpressteile, Ringe und Schmiedematerial 9,0 Mn – 20 Cr – 6,5 Ni – 0,27 N Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5657D SAE AMS 5657D (Stahlstäbe und Schmiedestücke, korrosions- und mäßig hitzebeständig 15Cr - 7.1Ni - 2.5Mo - 1.1Al) | 1 | chevron_right |
| SAE AMS 5659/H1025C SAE AMS 5659/H1025C (Stahl, Korrosionsresistent, Stangen, Drähte, Schmiedestücke, Ringe und Extrusionen, 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu, Abschmelzendenelektrodenumgeschmolzen, Lösungsgeglüht und Ausscheidungsgeglüht (H1025).) | 1 | chevron_right |
| SAE AMS 5659/H1075 SAE AMS 5659/H1075 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Strangpressprofile 15Cr - 4,5Ni - 0,30Cb (Nb) - 3,5Cu lösungs- und ausscheidungswärmebehandelt (H1075)) | 1 | chevron_right |
| SAE AMS 5659/H1100 SAE AMS 5659/H1100 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Strangpressprofile 15Cr - 4,5Ni - 0,30Cb (Nb) - 3,5Cu Lösung und Ausscheidung wärmebehandelt (H1100)) | 1 | chevron_right |
| SAE AMS 5659/H1150 SAE AMS 5659/H1150 (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Strangpressprofile 15Cr - 4,5Ni - 0,30Cb (Nb) - 3,5Cu Lösung und Ausscheidung wärmebehandelt (H1150)) | 1 | chevron_right |
| SAE AMS 5659/H900A SAE AMS 5659/H900A (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Strangpressprofile 15Cr - 4,5Ni - 0,30Cb (Nb) - 3,5Cu Lösung und Ausscheidung wärmebehandelt (H900)) | 1 | chevron_right |
| SAE AMS 5659/H925A SAE AMS 5659/H925A (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Strangpressprofile 15Cr - 4,5Ni - 0,30Cb (Nb) - 3,5Cu Lösung und Ausscheidung wärmebehandelt (H925)) | 1 | chevron_right |
| SAE AMS 5659T SAE AMS 5659T (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Strangpressprofile 15Cr - 4,5Ni - 0,30Cb (Nb) - 3,5Cu Verbrauchselektrode Umgeschmolzene Lösung Wärmebehandelt, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5660N SAE AMS 5660N (Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars Forgings and Forging Stock, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe (Incoloy 901), Consumable Electrode Remelted or Vacuum Induction Melted, Solution, Stabilization, and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 5661H SAE AMS 5661H (Nickel-Eisen-Legierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe und Vormaterial für Schmiedestücke oder Blitzschweißringe 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Legierung 901) Abschmelzelektroden-Umschmelzverfahren oder Vakuum-Induktions-Schmelzverfahren Lösungsgeglüht, stabilisiert und ausscheidungsgehärtet) | 1 | chevron_right |
| SAE AMS 5662P SAE AMS 5662P (Nickel-Legierung, korrosions- und hitzebeständig, Stangen, Schmiedestücke, Ringe und Vormaterial für Schmiedestücke und Ringe 52,5Ni - 19Cr - 3,0Mo - 5,1Cb (Nb) - 0,90Ti - 0,50AI - 18Fe Verbrauchselektrode oder Vakuuminduktionsschmelze 1775°F (968°C) lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5663P SAE AMS 5663P (Nickel-Legierung, korrosions- und hitzebeständig, Stangen, Schmiedestücke, Ringe und Vormaterial für Schmiedestücke und Ringe 52,5Ni - 19Cr - 3,0Mo - 5,1Cb (Nb) - 0,90Ti - 0,50Al - 18Fe Verbrauchselektrode oder Vakuum-Induktionsschmelze 1775 °F (968 °C) Lösung und Ausscheidungswärmebehandlung) | 1 | chevron_right |
| SAE AMS 5664G SAE AMS 5664G (Nickellegierung, Korrosions- und Hitzeresistent, Stangen, Schmiedestücke und Ringe 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe, Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen 1950°F (1066°C) lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5665R SAE AMS 5665R (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe und Vormaterial für Schmiedestücke und Ringe 74Ni - 15.5Cr - 8.0Fe) | 1 | chevron_right |
| SAE AMS 5666K SAE AMS 5666K (Nickellegierung, korrosions- und hitzebeständig, Stangen, Schmiedeteile, Strangpressteile, Ringe und Lager für Schmiedeteile, Strangpressteile und Ringe, 62Ni – 21,5Cr – 9,0Mo – 3,65Cb (Nb) geglüht) | 1 | chevron_right |
| SAE AMS 5667R SAE AMS 5667R (Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings, Rings and Heading, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe (Inconel X750), Equalized, Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5668L SAE AMS 5668L (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe und Schmiedevorprodukte 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al (X750) 2100°F (1149°C) lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5669B SAE AMS 5669B (Legierungsstangen, Korrosions- und Hitzeresistent Nickelbase - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe, Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen) | 1 | chevron_right |
| SAE AMS 5670H SAE AMS 5670H (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe und Material für Ringe, Schmiedestücke und Kopfteile 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) 1800°F (982°C) lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5671J SAE AMS 5671J (Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Forging Stock 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted, 1800°F (982°C) Solution Heat Treated, Precipitation Hardenable (X750)) | 1 | chevron_right |
| SAE AMS 5672D SAE AMS 5672D (Stahldraht, korrosionsbeständig 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu aushärtbar, federhart) | 1 | chevron_right |
| SAE AMS 5674G SAE AMS 5674G (Stahl, korrosions- und hitzebeständig, Draht 18Cr - 11.5Ni - 0.70Cb (Nb) (347) lösungsgeglüht) | 2 | chevron_right |
| SAE AMS 5675J SAE AMS 5675J (Nickellegierung, korrosions- und hitzebeständig, Schweißdraht 70Ni - 2,5Mn - 15,5Cr - 3,0Ti - 7,0Fe) | 1 | chevron_right |
| SAE AMS 5676G SAE AMS 5676G (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 80Ni - 20Cr) | 1 | chevron_right |
| SAE AMS 5677D SAE AMS 5677D (Nickellegierung, Korrosions- und Hitzeresistent, umhüllte Schweisselektroden 75ni 19.5cr 1.6(Cb + Ta)) | 1 | chevron_right |
| SAE AMS 5678G SAE AMS 5678G (Stahl, korrosionsbeständig, Draht 17Cr - 7.1Ni - 1.1Al kaltgezogen, aushärtbar) | 1 | chevron_right |
| SAE AMS 5679H SAE AMS 5679H (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 73Ni - 15.5Cr - 2.2Cb - 8.0Fe) | 1 | chevron_right |
| SAE AMS 5680K SAE AMS 5680K (Stahl, korrosions- und hitzebeständig, Schweißdraht 18.5Cr - 11Ni - 0.40Cb (Nb) (SAE 30347)) | 1 | chevron_right |
| SAE AMS 5681E SAE AMS 5681E (Schweißelektroden, ummantelt, Stahl, korrosions- und hitzebeständig, 19,5Cr - 10Ni - 0,60(Cb + Ta)) | 1 | chevron_right |
| SAE AMS 5682F SAE AMS 5682F (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 78Ni - 20Cr (8020)) | 1 | chevron_right |
| SAE AMS 5683G SAE AMS 5683G (Legierungsschweissdraht, Korrosions- und Hitzeresistent 75Ni - 15.5Cr - 8.0Fe) | 1 | chevron_right |
| SAE AMS 5684C SAE AMS 5684C (Legierte Schweisselektroden, Umhüllt, Korrosions- und Hitzeresistent 72ni 15cr 9fe 2.8(Cb + Ta)) | 1 | chevron_right |
| SAE AMS 5685L SAE AMS 5685L (Stahl, korrosionsbeständig, Sicherheitsdraht, 18Cr - 11.5Ni (SAE 30305) lösungsgeglüht, kaltgeformt) | 1 | chevron_right |
| SAE AMS 5686J SAE AMS 5686J (Stahl, korrosionsbeständig, Nietdraht, 18Cr - 11.5Ni (SAE 305) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5687P SAE AMS 5687P (Nickellegierung, korrosions- und hitzebeständig, Draht 74Ni - 15.5Cr - 8.0Fe geglüht) | 1 | chevron_right |
| SAE AMS 5688M SAE AMS 5688M (Stahl, korrosionsbeständig, Draht 18Cr - 9.0Ni (SAE 30302) federhart) | 1 | chevron_right |
| SAE AMS 5689H SAE AMS 5689H (Stahl, korrosions- und hitzebeständig, Draht 18Cr - 10.5Ni - 0.40Ti (321) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5690N SAE AMS 5690N (Stahl, Korrosions- und Hitzeresistent, Draht, 17Cr - 12Ni - 2.5Mo (316), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5691H SAE AMS 5691H (Stahl, Schweißelektroden, ummantelt, korrosions- und hitzebeständig 18.5Cr - 12.5Ni - 2.5Mo) | 1 | chevron_right |
| SAE AMS 5692F SAE AMS 5692F (Stahl, korrosions- und hitzebeständig, Schweißdraht 19Cr - 12.5Ni - 2.5Mo) | 1 | chevron_right |
| SAE AMS 5693C SAE AMS 5693C (Stahl, korrosionsbeständig, Draht 18cr 9.0ni kryogenisch hergestellt, hohe Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5694K SAE AMS 5694K (Stahl, korrosions- und hitzebeständig, Schweißdraht 27Cr - 21.5Ni) | 1 | chevron_right |
| SAE AMS 5695G SAE AMS 5695G (Stahl, korrosions- und hitzebeständig, ummantelte Schweißelektroden 25Cr 20Ni) | 1 | chevron_right |
| SAE AMS 5696F SAE AMS 5696F (Steel, Corrosion- and Heat-Resistant, Welding Wire, 19Cr - 12.5Ni - 2.5Mo (316L)) | 1 | chevron_right |
| SAE AMS 5697H SAE AMS 5697H (Stahl, korrosionsbeständig, Draht 19Cr - 9.5Ni (304) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5698H SAE AMS 5698H (Nickellegierung, korrosions- und hitzebeständig, Draht 72Ni - 15,5Cr - 0,95Cb - 2,5Ti - 0,70Al - 7,0Fe lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5699H SAE AMS 5699H (Nickellegierung, korrosions- und hitzebeständig, Draht 72Ni - 15,5Cr - 0,95Cb - 2,5Ti - 0,70Al - 7,0Fe lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5700H SAE AMS 5700H (Stahl, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe und Schmiederohlinge 13.5Cr - 13.5Ni - 0.35Mo - 2.2W geglüht) | 1 | chevron_right |
| SAE AMS 5701G SAE AMS 5701G (Nickellegierung, Korrosions- und Hitzeresistent, Stangen, Schmiedestücke, Blitzgeschweißte Ringe und Schmiederohlinge; 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti; Mit abschmelzender Elektrode umgeschmolzen oder Vakuuminduktionsgeschmolzen; 1800°F (982°C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5702E SAE AMS 5702E (Nickellegierung, Korrosions- und Hitzeresistent, Stangen, Schmiedestücke und Ringe 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti, Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen 1750°F (954°C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5703F SAE AMS 5703F (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe und Vormaterial zum Schmieden 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Abschmelzelektroden oder Vakuum-Induktions-Schmelzverfahren 1750°F (954°C) lösungsgeglüht, stabilgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5704L SAE AMS 5704L (Nickellegierung, korrosions- und hitzebeständig, Schmiedeteile 57Ni - 19,5Cr - 13,5Co - 4,6Mo - 3,0Ti - 1,4Al - 0,05Zr - 0,006B Mit Abschmelzende Elektrode oder durch Vakuuminduktion geschmolzen 1825 bis 1900 ° F (996 bis 1038 ° C) Lösungsgeglüht, Stabilisierungs- und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 5705E SAE AMS 5705E (Stahl, korrosions- und hitzebeständig, Stäbe and Schmiedestücke 2.5Si - 12.8Cr - 8.0Ni geglüht) | 1 | chevron_right |
| SAE AMS 5706N SAE AMS 5706N (Nickellegierung, Korrosions- und Hitzeresistent, Stangen, Schmiedestücke und Ringe 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr, Mit Abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen 1825 bis 1900°F Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5707P SAE AMS 5707P (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe und Schmiedevorprodukte 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Abschmelzelektroden-Umschmelzverfahren oder Vakuum-Induktions-Schmelzverfahren 1825 bis 1900 °F (996 bis 1038 °C) lösungsgeglüht, stabilgeglüht und ausscheidungsgehärtet) | 1 | chevron_right |
| SAE AMS 5708N SAE AMS 5708N (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, Ringe, Schmiedeteile, Blitzgeschweißte Ringe und Kopfmaterial 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B (Waspaloy) Abschmelzelektroden oder Vakuum-Induktions-Schmelzverfahren 1975°F (1079°C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5709K SAE AMS 5709K (Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975°F (1079°C) Solution Heat Treated, Stabilized, and Precipitation Heat Treated) | 1 | chevron_right |
| SAE AMS 5710F SAE AMS 5710F (Stahl, Stäbe und Schmiedestücke, korrosions- und hitzebeständig 20Cr - 2.2Si - 1.3Ni (0.76 - 0.86)) | 1 | chevron_right |
| SAE AMS 5711G SAE AMS 5711G (Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging, Rings and Heading, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY S), Consumable Electrode Remelted, Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5712L SAE AMS 5712L (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B unter Vakuum geschmolzen, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5713L SAE AMS 5713L (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B unter Vakuum geschmolzen, lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5714E SAE AMS 5714E (Legierung, Stäbe, Schmiedestücke und Ringe, korrosions- und hitzebeständig 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe aushärtbar) | 1 | chevron_right |
| SAE AMS 5715H SAE AMS 5715H (Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings and Rings 60.5Ni - 23Cr - 14Fe - 1.4Al (Alloy 601) Annealed) | 1 | chevron_right |
| SAE AMS 5716L SAE AMS 5716L (Eisen-Nickel-Legierung, hitzebeständig, Stangen, Draht, Schmiedestücke, Ringe und Lager für Ringe und Schmiedestücke, 44Fe - 18,5Cr - 35,5Ni - 1,1Si, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5717K SAE AMS 5717K (Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings and Stock for Rings and Forging 45.5Ni - 25.5Cr - 3.2Mo - 3.2W - 18.5Fe (Alloy 333) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5718E SAE AMS 5718E (Stahl, Stäbe, Schmiedestücke, Rohre und Ringe, korrosionsbeständig 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) geglüht) | 1 | chevron_right |
| SAE AMS 5719E SAE AMS 5719E (Stabstahl, Draht, Schmiedestücke und Schmiedematerial, mechanische Rohre, Ringe und Strangpressprofile, korrosionsbeständig 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) geglüht, im Vakuumbogen oder durch Elektroschlacke umgeschmolzen) | 1 | chevron_right |
| SAE AMS 5726F SAE AMS 5726F (Stahl, korrosions- und hitzebeständig, Stäbe und Draht 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) lösungsgeglüht und kaltverfestigt, Abschmelzelektroden umgeschmolzen, 200 ksi (1379 MPa) Zugfestigkeitsvermögen) | 1 | chevron_right |
| SAE AMS 5731M SAE AMS 5731M (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke, Ringe oder Kopfteile 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Abschmelzelektroden umgeschmolzen, 1800 °F (982 °C) lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5732K SAE AMS 5732K (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke, Ringe oder Kopfteile 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Abschmelzelektroden 1800 °F (982 °C), lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5734L SAE AMS 5734L (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre und Material für Schmieden und Kopfformen, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (Legierung A286), Abschmelzelektroden, 1650 °F (899 °C) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5735J SAE AMS 5735J (Stahlstangen, Schmiedestücke, Rohre und Ringe, Korrosions- und Hitzeresistent 15Cr-26Ni-1.3Mo-2.1Ti-0.3V 1800°F (982.2°C) Lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 5736G SAE AMS 5736G (Stahlstangen, Schmiedestücke, Rohre und Ringe, Korrosions- und Hitzeresistent 15Cr 26Ni 1.3Mo 2.1Ti 0.30V 1800°F (982°C)Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5737R SAE AMS 5737R (Stahl, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, mechanische Rohre und Halbzeug zum Schmieden und Stauchen 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Mit Abschmelzelektroden umgeschmolzen 1650 °F (899 °C) lösungsgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5738F SAE AMS 5738F (Steel, Corrosion Resistant, Bars and Wire 18Cr - 9Ni - 0.25Se (303Se) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked) | 1 | chevron_right |
| SAE AMS 5739E SAE AMS 5739E (Stahl, korrosions- und mäßig hitzebeständig, Stäbe, Schmiedestücke und Ringe 14.5Cr - 6.5Ni - 0.72Ti lösungsgeglüht und martensitausgehärtet, 180,000 psi (1240 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5740E SAE AMS 5740E (Stahl, korrosions- und mäßig hitzebeständig, Stäbe, Schmiedestücke und Ringe 14.5Cr - 6.5Ni - 0.72Ti lösungsgeglüht und martensitausgehärtet, 155,000 psi (1070 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5743L SAE AMS 5743L (Steel, Corrosion- and Heat-Resistant, Bars, Forgings and Forging Stock, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N (AM 355), Consumable Electrode Remelted, Solution Heat Treated, Subzero Cooled, Equalized, and Over-Tempered) | 1 | chevron_right |
| SAE AMS 5744G SAE AMS 5744G (Stahl, korrosions- und hitzebeständig, Stäbe und Schmiedestücke und Schmiedevorprodukte 15.5Cr - 4.5Ni - 2.9Mo - 0.10N (AM 355) Abschmelzelektroden umgeschmolzen und wärmebehandelt, 170 ksi (1172 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5745G SAE AMS 5745G (Stahl, korrosions- und hitzebeständig, Stangen und Schmiedeteile 16,5Cr - 4,5Ni - 2,9Mo - 0,10N Mit abschmelzender Elektrode umgeschmolzen, ausgeglichen und überhärtet) | 1 | chevron_right |
| SAE AMS 5746G SAE AMS 5746G (Legierung, korrosions- und hitzebeständig, Stäbe und Schmiedestücke 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al - 31Fe (D979) Abschmelzelektrode, unter Vakuum geschmolzen, Lösung, lösungswärmebehandelt) | 1 | chevron_right |
| SAE AMS 5747E SAE AMS 5747E (Nickellegierung, Korrosions- und hitzeresistent, Stangen, Schmiedestücke und Ringe 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800°F (982°C) lösungsgeglüht und ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5749G SAE AMS 5749G (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Schmiedevorprodukte und mechanische Rohre 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premiumqualität für Lageranwendungen, unter Vakuum zweifach geschmolzen) | 1 | chevron_right |
| SAE AMS 5750D SAE AMS 5750D (Legierung, Stäbe, Schmiedestücke und Ringe, korrosions- und hitzebeständig, Nickel basiert - 15.5Cr - 16Mo - 3.8W - 5.5Fe lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5751F SAE AMS 5751F (Legierung, Stäbe, Schmiedestücke und Ringe, korrosions- und hitzebeständig 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B lösungsgeglüht,stabilgeglüht und ausgehärtet abschmelzbare Elektrode Verfahren oder Vakuum-Induktions-Schmelzverfahren) | 1 | chevron_right |
| SAE AMS 5753C SAE AMS 5753C (Legierte Stangen und Schmiedeteile, Korrosions- und Hitzeresistent, 54ni 17.5cr 16.5co 4.0mo 2.9ti 2.9al 0.006b, Vakuum geschmolzen, Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5754P SAE AMS 5754P (Nickellegierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe und Schmiedestücke-, Ring- und Kopfmaterial 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Legierung X), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5755H SAE AMS 5755H (Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings and Forging and Flash-Welded Ring Stock 64Ni - 5.0Cr - 24.5Mo - 5.5Fe (Alloy W) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5758K SAE AMS 5758K (Alloy, Corrosion-Resistant, Bars 20Cr - 35Ni - 35Co - 10Mo (MP35N) Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening) | 1 | chevron_right |
| SAE AMS 5759P SAE AMS 5759P (Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings 52Co - 20Cr - 10Ni - 15W (L - 605)) | 1 | chevron_right |
| SAE AMS 5762H SAE AMS 5762H (Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S (203 EZ), Free Machining, Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5763F SAE AMS 5763F (Stahl, korrosionsbeständige Stäbe, Schmiedeteile, mechanische Rohre, Ringe und Schmiedematerial 15Cr - 6,5 Ni - 0,75 Mo - 0,50 Cb (Nb) - 1,5 Cu, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5764F SAE AMS 5764F (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Extrusionenen und Ringe 5.0Mn - 22Cr - 12.5Ni - 2.2Mo - 0.20Cb - 0.30N - 0.20V lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5766G SAE AMS 5766G (Alloy, Corrosion and Heat-Resistant, Bars, Forgings and Forging Stock, 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, (Alloy 800), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5768M SAE AMS 5768M (Legierung, korrosions- und hitzebeständig, Stäbe, Draht, Schmiedestücke, Ringe und Material für Schmiedestücke, Ringe und Kopfteile 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe lösungsgeglüht und ausscheidungsgehärtet) | 1 | chevron_right |
| SAE AMS 5769H SAE AMS 5769H (Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe (N-155), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5771H SAE AMS 5771H (Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings 74Ni - 7.0Cr - 16.5Mo (Hastelloy N) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5772F SAE AMS 5772F (Kobaltlegierung, Korrosions- und Hitzeresistent, Stangen, Schmiedestücke und Ringe, 40Co - 22Cr - 22Ni - 14.5W - 0.07La, Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5773G SAE AMS 5773G (Stahl, korrosionsbeständig, Stangen, Draht, Schmiedestücke, mechanische Rohre, Ringe und Rohmaterial für Schmiedestücke oder Ringe 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu mit Abschmelzelektroden umgeschmolzen, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5774F SAE AMS 5774F (Steel, Corrosion and Heat-Resistant, Welding Wire, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N (AM350)) | 1 | chevron_right |
| SAE AMS 5775E SAE AMS 5775E (Schweißelektroden, ummantelt, korrosions- und hitzebeständiger Stahl 16.5Cr - 4.5Ni - 2.9Mo - 0.10N) | 1 | chevron_right |
| SAE AMS 5776H SAE AMS 5776H (Stahl, korrosions- und hitzebeständig, Schweißdraht 12.5Cr (SAE 51410)) | 1 | chevron_right |
| SAE AMS 5777E SAE AMS 5777E (Stahl, korrosionsbeständig, ummantelte Schweißelektroden 12,5Cr) | 1 | chevron_right |
| SAE AMS 5778K SAE AMS 5778K (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 72Ni - 15.5Cr - 1.0Cb(Nb) - 2.4Ti - 0.70Al - 7.0Fe) | 1 | chevron_right |
| SAE AMS 5779E SAE AMS 5779E (Legierte Schweisselektroden, Umhüllt, Korrosions- und Hitzeresistent 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al - 5.5Fe) | 1 | chevron_right |
| SAE AMS 5780F SAE AMS 5780F (Stahl, korrosions- und hitzebeständig, Schweißdraht 15.5Cr - 4.5Ni - 2.9Mo - 0.10N) | 1 | chevron_right |
| SAE AMS 5781D SAE AMS 5781D (Stahl, Schweißelektroden, ummantelt, korrosions- und mäßig hitzebeständig 15,5Cr - 4,5Ni - 2,9Mo - 0,10N) | 1 | chevron_right |
| SAE AMS 5782J SAE AMS 5782J (Stahl, korrosions- und hitzebeständig, Schweißdraht 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vakuum-Induktions-Schmelzverfahren) | 1 | chevron_right |
| SAE AMS 5783F SAE AMS 5783F (Stahl, Schweißelektroden, ummantelt, korrosions- und hitzebeständig 1,95Cr - 8,8Ni - 0,50Mo - 1,5W - 1,0Cb) | 1 | chevron_right |
| SAE AMS 5784F SAE AMS 5784F (Stahl, korrosions- und hitzebeständig, Schweißdraht 29Cr - 9.5Ni) | 1 | chevron_right |
| SAE AMS 5785F SAE AMS 5785F (Stahl, Schweißelektroden, ummantelt, korrosions- und hitzebeständig 28,5 Cr - 9,5 Ni) | 1 | chevron_right |
| SAE AMS 5786J SAE AMS 5786J (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe) | 1 | chevron_right |
| SAE AMS 5787B SAE AMS 5787B (Legierte Schweißelektroden, umhüllt, korrosions- und hitzebeständig, 63Ni - 5,0Cr - 24,5Mo - 5,5Fe) | 1 | chevron_right |
| SAE AMS 5788G SAE AMS 5788G (Kobaltlegierung, Korrosions- und Hitzeresistent, Aufpanzerungsstäbe und Drähte 62Co - 29Cr - 4.5W - 1.2C) | 1 | chevron_right |
| SAE AMS 5789E SAE AMS 5789E (Kobaltlegierung, Korrosions- und Hitzeresistent, Schweissdraht, 54Co - 25.5Cr - 10.5Ni - 7.5W) | 1 | chevron_right |
| SAE AMS 5790F SAE AMS 5790F (Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb (347), High Ferrite Grade) | 1 | chevron_right |
| SAE AMS 5791D SAE AMS 5791D (Kobaltlegierung, Puder, Plasmaspray, 56.5Co – 25.5Cr – 10.5Ni – 7.5W) | 1 | chevron_right |
| SAE AMS 5794G SAE AMS 5794G (Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155), Annealed) | 1 | chevron_right |
| SAE AMS 5795G SAE AMS 5795G (Eisenlegierung, korrosions- und hitzebeständig, ummantelt, Schweißelektroden 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0 (Cb + Ta)) | 1 | chevron_right |
| SAE AMS 5796F SAE AMS 5796F (Kobaltlegierung, Korrosions- und Hitzeresistent, Schweissdraht, 52Co - 20Cr - 10Ni - 15W) | 1 | chevron_right |
| SAE AMS 5797E SAE AMS 5797E (Kobaltlegierung, Korrosions- und Hitzeresistent,Umhüllte Schweisselektroden, 51.5Co - 20Cr - 10Ni - 15W) | 1 | chevron_right |
| SAE AMS 5798J SAE AMS 5798J (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdrähte 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18Fe) | 1 | chevron_right |
| SAE AMS 5800H SAE AMS 5800H (Nickellegierung, korrosions- und hitzebeständig, Schweißdraht 54Ni - 19Cr - 11Co -10Mo - 3.2Ti - 1.5Al - 0.006B Vakuuminduktionsgeschmolzen und umgeschmolzen (Rene 41)) | 1 | chevron_right |
| SAE AMS 5801H SAE AMS 5801H (Kobaltlegierung, korrosions- und hitzebeständig, Schweißdraht 39Co - 22Cr - 22Ni - 14.5W - 0.07La (188)) | 1 | chevron_right |
| SAE AMS 5802E SAE AMS 5802E (Eisen-Nickellegierung, korrosions- und hitzebeständig, Schweißdraht 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti unter Vakuum geschmolzen, geringe Ausdehnung) | 1 | chevron_right |
| SAE AMS 5803H SAE AMS 5803H (Stahl, korrosions- und hitzebeständig, Schweißdraht 16.4Cr - 4.8Ni - 0.22Cb - 3.6Cu unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 5804J SAE AMS 5804J (Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V (A286)) | 1 | chevron_right |
| SAE AMS 5805K SAE AMS 5805K (Stahl, korrosions- und hitzebeständig, Schweißdraht 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V unter Vakuum durch Induktion geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 5806C SAE AMS 5806C (Legierung, Schweißdraht, korrosions- und hitzebeständig, geringe Ausdehnung, 42Fe - 38Ni - 15Co - 3.0 (Cb + Ta) - 1.4Ti - 0.92Al unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 5808D SAE AMS 5808D (Stahl, korrosions- und hitzebeständig, Schweißdraht 19Cr - 13Ni - 2.5Mo hoher Ferritanteil, Kontrolle bzgl. Spurenelementen) | 1 | chevron_right |
| SAE AMS 5810C SAE AMS 5810C (Steel, Corrosion- and Heat-Resistant, Flat Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286), 1800°F (982°C) Solution Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode Remelted) | 1 | chevron_right |
| SAE AMS 5811E SAE AMS 5811E (Stahl, korrosions- und hitzebeständig, Schweißdraht 15Cr - 30Ni - 1.2Mo - 2.2Ti - 0.25Al - 0.001B - 0.030V (0.01 - 0.03C) unter Vakuum durch Induktion geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 5812G SAE AMS 5812G (Stahl, korrosions- und hitzebeständig, Schweißdraht 15Cr - 7.1Ni - 2.4Mo - 1.0Al unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 5813C SAE AMS 5813C (Draht, Schweißen, 15Cr - 7,1Ni - 2,4Mo - 1Al) | 1 | chevron_right |
| SAE AMS 5814D SAE AMS 5814D (Kobaltlegierung, Korrosions- und Hitzeresistent, 52Co - 20Cr - 20Ni - 7.5Ta, Vakuumgeschmolzen) | 1 | chevron_right |
| SAE AMS 5817G SAE AMS 5817G (Stahl, korrosions- und hitzebeständig, Schweißdraht 13Cr - 2,0 Ni - 3,0 W) | 1 | chevron_right |
| SAE AMS 5818D SAE AMS 5818D (Steel, Corrosion- and Heat Resistant, Welding Wire 9.0Mn - 20Cr - 6.2Ni - 0.20N (21-6-9, Nitronic 40W)) | 1 | chevron_right |
| SAE AMS 5819B SAE AMS 5819B (Cobalt Alloy, Corrosion- and Heat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo (Stellite 21)) | 2 | chevron_right |
| SAE AMS 5821H SAE AMS 5821H (Stahl, korrosionsbeständig, Schweißdraht 12Cr (SAE 51410 Modified), Kontrolle bzgl. Ferritstruktur) | 1 | chevron_right |
| SAE AMS 5822E SAE AMS 5822E (Stahl, korrosions- und hitzebeständig, Schweißdraht 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vakuum-Induktions-Schmelzverfahren) | 1 | chevron_right |
| SAE AMS 5823F SAE AMS 5823F (Stahl, korrosions- und hitzebeständig, Schweißdraht 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V) | 1 | chevron_right |
| SAE AMS 5824G SAE AMS 5824G (Stahl, korrosionsbeständig, Schweißdraht 17Cr - 7.1Ni - 1.0Al) | 1 | chevron_right |
| SAE AMS 5825J SAE AMS 5825J (Stahl, korrosionsbeständig, Schweißdraht 16.4Cr - 4.8Ni - 0.22Cb(Nb) - 3.6Cu) | 1 | chevron_right |
| SAE AMS 5826F SAE AMS 5826F (Stahl, korrosions- und hitzebeständig, Schweißdraht 15Cr - 5.1Ni - 0.30Cb(Nb) - 3.2Cu) | 1 | chevron_right |
| SAE AMS 5827G SAE AMS 5827G (Stahl, korrosionsbeständig, ummantelte Schweißelektroden, 16,4Cr - 4,8Ni - 0,22 Cb - 3,6Cu) | 1 | chevron_right |
| SAE AMS 5828H SAE AMS 5828H (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vakuuminduktionsgeschmolzen, Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5829F SAE AMS 5829F (Nickellegierung, korrosions- und hitzebeständig, Schweißdraht 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5Al Vakuum-Induktions-Schmelzverfahren) | 1 | chevron_right |
| SAE AMS 5830D SAE AMS 5830D (Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, Consumable Electrode Remelted or Vacuum Induction Melted, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 35Fe (Alloy 901)) | 1 | chevron_right |
| SAE AMS 5831E SAE AMS 5831E (Eisen-Nickel-Chrom-Kobalt-Legierung, korrosions- und hitzebeständig, Schweißdraht 29Fe - 22Cr - 21Ni - 18,5Co - 3,2Mo - 2,8W - 0,78Ta - 0,30Al - 0,05Zr - 0,05La - 0,20N) | 1 | chevron_right |
| SAE AMS 5832J SAE AMS 5832J (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe, Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen) | 1 | chevron_right |
| SAE AMS 5833F SAE AMS 5833F (Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr -15Ni - 40Co - 7.0Mo - 16Fe (Elgiloy) Vacuum Induction Melted, Vacuum Consumable Electrode or Electroslag Remelted, Solution Heat Treated and Cold Drawn) | 1 | chevron_right |
| SAE AMS 5834F SAE AMS 5834F (Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe (Elgiloy) Vacuum Induction Melted Plus Vacuum Consumable Electrode or Electroslag Remelted, Solution Heat Treated, Cold Drawn, and Aged) | 1 | chevron_right |
| SAE AMS 5835D SAE AMS 5835D (Nickellegierung, korrosions- und hitzebeständig, Schweißdraht 72Ni - 3.2Mn - 20Cr - 2.5Cb - 0.48Ti Vakuum-Induktions-Schmelzverfahren, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 5836E SAE AMS 5836E (Nickellegierung, korrosions- und hitzebeständig, Schweißdraht, 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb)) | 1 | chevron_right |
| SAE AMS 5837H SAE AMS 5837H (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (625)) | 1 | chevron_right |
| SAE AMS 5838G SAE AMS 5838G (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La (S)) | 1 | chevron_right |
| SAE AMS 5839D SAE AMS 5839D (Nickellegierung, korrosions- und hitzebeständig, Schweißdraht 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al) | 1 | chevron_right |
| SAE AMS 5840E SAE AMS 5840E (Stahl, korrosions- und hitzebeständig, Schweißdraht 13Cr - 8.0Ni - 2.3Mo - 1.1Al unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 5841G SAE AMS 5841G (Cobalt-Nickel-Legierung, Korrosions- und Hitzeresistent, Stangen, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe, Vakuuminduktions- plus mit abschmelzender Elektrode im Vakuum geschmolzen, Lösungsgeglüht zur Härtung) | 1 | chevron_right |
| SAE AMS 5842H SAE AMS 5842H (Kobalt-Nickel-Legierung, Korrosions- und Hitzeresistent, Stangen, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe, Vakuuminduktions-plus mit abschmelzender Elektrode im Vakuum geschmolzen, Lösungsgeglüht und gehärtet) | 1 | chevron_right |
| SAE AMS 5843H SAE AMS 5843H (Cobalt-Nickel-Legierung, Korrosions- und Hitzeresistent, Stangen, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe, Vakuuminduktions- plus mit abschmelzender Elektrode im Vakuum geschmolzen, lösungsgeglüht, gehärtet und ausgelagert) | 1 | chevron_right |
| SAE AMS 5844K SAE AMS 5844K (Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened) | 1 | chevron_right |
| SAE AMS 5845L SAE AMS 5845L (Legierung, Korrosionsresistent, Rundstangen, 20Cr - 35Ni - 35Co - 10Mo, Vakuuminduktions- plus mit abschmelzender Elektrode im Vakuum umgeschmolzen, lösungsgeglüht, gehärtet und ausgelagert) | 1 | chevron_right |
| SAE AMS 5846C SAE AMS 5846C (Legierung, korrosions- und hitzebeständig, Stäbe und Schmiedestücke, 53Ni - 15Cr - 18.5Co - 5.0Mo - 3.2Ti - 4.2Al - 0.03B, unter Vakuum zweifach geschmolzen, stabilgeglüht und ausgehärtet) | 1 | chevron_right |
| SAE AMS 5848F SAE AMS 5848F (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Extrusionen, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke, Extrusionen und Ringe, verschleiß- und fressbeständig, 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5851C SAE AMS 5851C (Nickellegierung, Korrosions- und Hitzeresistent, Pulver 55Ni 15Cr 17Co 5.0Mo 3.5Ti 4.0Al 0.025B) | 1 | chevron_right |
| SAE AMS 5852D SAE AMS 5852D (Nickellegierung, korrosions- und hitzebeständig, Knüppel und Vorformlinge 55Ni - 15Cr - 17Co - 5,0Mo - 3,5Ti - 4,0Al - 0,025B Leistungsmetallurgieprodukt, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 5853E SAE AMS 5853E (Stahl, korrosions- und hitzebeständig, Stäbe und Draht 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Abschmelzelektroden 1800 °F (982 °C) lösungsgeglüht und kaltverfestigt 160 ksi (1103 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5854D SAE AMS 5854D (Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or Vacuum Induction Melted, Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5856B SAE AMS 5856B (Legierung Knüppel und Vorformen, Korrosions- und Hitzeresistent, 59.5Ni 12Cr 10Co 3.0Mo 6.0W 3.0Ti 1.5Ta 4.5Al 0.015B 0.10Zr (0.30-0.35 C), Pulvermetallurgie Produkt) | 1 | chevron_right |
| SAE AMS 5857E SAE AMS 5857E (Steel, Corrosion-Resistant, Bars and Wire 19Cr - 10Ni (304) High Yield Strength, Solution Heat Treated and Cold Worked) | 1 | chevron_right |
| SAE AMS 5858F SAE AMS 5858F (Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Multiple Melted, 1800°F (982°C) Solution Heat Treated, Welding Grade Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5859G SAE AMS 5859G (Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu (Custom 450), Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5860H SAE AMS 5860H (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu mehrfach geschmolzen, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5862/H1025 SAE AMS 5862/H1025 (Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (15-5PH), Consumable Electrode Remelted, Premium Aircraft Quality, Solution Heat Treated and Precipitation Hardened (H1025)) | 1 | chevron_right |
| SAE AMS 5862M SAE AMS 5862M (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu umgeschmolzen mit Abschmelzelektroden, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5863F SAE AMS 5863F (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 15Cr - 6.5Ni - 0.75Mo - 0.60Cb - 1.5Cu lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5864D SAE AMS 5864D (Stahl, korrosionsbeständig, Grobblech 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5865E SAE AMS 5865E (Nickel, Korrosions- und Hitzeresistent, Blech und Band, Thorium dispersionsverfestigt, , 2.2Th02) | 1 | chevron_right |
| SAE AMS 5866F SAE AMS 5866F (Stahl, korrosionsbeständig, Flachdraht 18Cr - 9,0Ni (302) Federhärte) | 1 | chevron_right |
| SAE AMS 5867C SAE AMS 5867C (Stahl, korrosions- und hitzebeständig, Schmiedestücke 12.5Cr (410) Erhöhte Bruchzähigkeit, geglüht) | 1 | chevron_right |
| SAE AMS 5868C SAE AMS 5868C (Stahl, korrosionsbeständig, nahtlos und geschweißte Rohre für Flugzeuge 19Cr - 9.5Ni (SAE 30304) kaltgezogen, 1/2 hart angelassen) | 1 | chevron_right |
| SAE AMS 5869E SAE AMS 5869E (Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (Alloy 625), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5870G SAE AMS 5870G (Nickellegierung, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al (Legierung 601), lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5871G SAE AMS 5871G (Eisen-Nickel-Chrom-Legierung, korrosions- und hitzebeständig, Bleche, Bänder und Platten 21Cr - 32,5Ni - 0,38Ti - 0,38Al - 45Fe Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5872G SAE AMS 5872G (Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Plate and Foil 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al (Alloy 263), Consumable Electrode Remelted or Vacuum Induction Melted, Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5873H SAE AMS 5873H (Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La (HASTELLOY S), Consumable Electrode Remelted, Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5874D SAE AMS 5874D (Legierung, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N (HS-556) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5875E SAE AMS 5875E (Cobalt Alloy, Corrosion- and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo -16Fe Solution Heat Treated, Cold Rolled, and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted) | 1 | chevron_right |
| SAE AMS 5876F SAE AMS 5876F (Kobaltlegierung, korrosions- und hitzebeständig, Band 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe vakuuminduktions- plus mit abschmelzender Elektrode umgeschmolzen, lösungsgeglüht und kalt gewalzt) | 1 | chevron_right |
| SAE AMS 5877C SAE AMS 5877C (Legierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke, Ringe und Vormaterial für Schmiedestücke, Ringe oder Kopfteile 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05La - 0.20N (HS-556) lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5878F SAE AMS 5878F (Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La (Alloy No. 230), Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5879E SAE AMS 5879E (Nickellegierung, korrosions- und hitzebeständig, Blech, Band und Folie 62Ni - 21,5Cr - 9,0Mo - 3,7Cb (Nb) kaltgewalzt und geglüht) | 1 | chevron_right |
| SAE AMS 5880E SAE AMS 5880E (Stahl, korrosionsbeständig, Stäbe, Draht und Schmiedestücke 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) als Lager verwendbar) | 1 | chevron_right |
| SAE AMS 5882D SAE AMS 5882D (Nickellegierung, korrosions- und hitzebeständig, Schmiedestücke, 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B, lösungs-, stabilgeglüht und ausgehärtet, Produkt der Pulvermetallurgie) | 1 | chevron_right |
| SAE AMS 5884E SAE AMS 5884E (Eisen-Nickel-Legierung, Stangen, Schmiedeteile und Ringe 42Fe - 37.5Ni - 14Co - 4.8Cb(Nb) - 1.6Ti lösungsgeglüht, ausscheidungshärtbar, mehrfach geschmolzen, hohe Temperatur, niedrige Ausdehnung) | 1 | chevron_right |
| SAE AMS 5886E SAE AMS 5886E (Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings and Rings, 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al (Nimonic Alloy 263), Consumable Electrode or Vacuum Induction Melted, 2100°F (1149°C) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5887E SAE AMS 5887E (Nickel-Legierung, korrosions- und hitzebeständig, Stangen, Schmiedestücke, Ringe und Schmiede- oder Ringmaterial 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Verbrauchselektrode oder vakuuminduktiv geschmolzen geglüht) | 1 | chevron_right |
| SAE AMS 5888D SAE AMS 5888D (Nickellegierung, korrosions- und hitzebeständig, Platte 54Ni - 22Cr - 12,5Co - 9,0Mo - 1,2Al geglüht) | 1 | chevron_right |
| SAE AMS 5889D SAE AMS 5889D (Nickellegierung, Korrosions- und Hitzeresistent, Blech und Band 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al, Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen) | 1 | chevron_right |
| SAE AMS 5890F SAE AMS 5890F (Nickel, Korrosions- und Hitzeresistent, Stangen, Schmiedestücke und Extrusionen, Thorium dispersionsverfestigt, 2.2ThO2) | 1 | chevron_right |
| SAE AMS 5891D SAE AMS 5891D (Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Forging, Ring and Heading Stock 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La (Alloy 230) Solution Heat Treated) | 1 | chevron_right |
| SAE AMS 5892D SAE AMS 5892D (Alloy, Sheet and Strip 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti (Alloy 909) Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion) | 1 | chevron_right |
| SAE AMS 5893D SAE AMS 5893D (Eisen-Nickellegierung, Stäbe, Schmiedestücke und Ringe sowie Vormaterial für Ringe, Schmiedestücke und Kopfteile 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti lösungsgeglüht, kurzzeitig ausscheidungshärtbar, mehrfach geschmolzen, hochtemperaturbeständig, geringe Ausdehnung) | 1 | chevron_right |
| SAE AMS 5894E SAE AMS 5894E (Kobaltlegierung, Stangen, Bleche und Grobbleche 60Co – 28Cr – 4.5W – 1.15C, Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5895G SAE AMS 5895G (Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Melted, 1750°F (954°C) Solution Heat Treated, Welding Grade Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5896C SAE AMS 5896C (Stahl, korrosions- und hitzebeständig, nahtloses oder geschweißtes Hydraulikrohr 18.5Cr - 10.5Ni - 0.55Ti (SAE 30321) lösungsgeglüht, kaltgezogen, 1/8 hart angelassen) | 1 | chevron_right |
| SAE AMS 5897C SAE AMS 5897C (Stahl, korrosions- und hitzebeständig, nahtloses oder geschweißtes Hydraulikrohr 18.5Cr - 11Ni - 0.80Cb (Nb) (SAE 30347) lösungsgeglüht und kaltgezogen, 1/8 hart angelassen) | 1 | chevron_right |
| SAE AMS 5898C SAE AMS 5898C (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorprodukte 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) unter Druck mit Abschmelzelektroden geschmolzen) | 1 | chevron_right |
| SAE AMS 5899D SAE AMS 5899D (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorprodukte 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Produkt der Pulvermetallurgie, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 5900D SAE AMS 5900D (Steel Bars, Wire, Forgings, Mechanical Tubing and Forging Stock, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb (Nb) - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted, Annealed) | 1 | chevron_right |
| SAE AMS 5901D SAE AMS 5901D (Stahl, korrosionsbeständig, Blech, Band und Platte; 18Cr - 8Ni (SAE 30301); Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5902E SAE AMS 5902E (Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5903D SAE AMS 5903D (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 18Cr - 9.0Ni (302) kaltgewalzt, 1/4 hart, 125 ksi (862 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5904D SAE AMS 5904D (Stahl, korrosionsbeständig, Blech und Band 18Cr - 9,0 Ni (302) kaltgewalzt, 1/2 hart, 150 ksi (1034 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5905D SAE AMS 5905D (Stahl, korrosionsbeständig, Blech und Band 18Cr - 9,0 Ni (302) kaltgewalzt, 3/4 hart, 175 ksi (1207 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5906D SAE AMS 5906D (Stahl, korrosionsbeständig, Feinblech und Bandblech 18Cr - 9.0Ni (SAE 30302) kaltgewalzt, walzhart, 185 ksi (1276 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5907D SAE AMS 5907D (Stahl, korrosions- und hitzebeständig, Feinblech, Bandstahl und Grobblech 17Cr - 12Ni - 2.5Mo (316) kaltgewalzt, 1/4 hart, 125 ksi (862 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5910D SAE AMS 5910D (Stahl, korrosionsbeständig, Feinblech, Bandstahl und Grobblech 19Cr - 9.2Ni (304) kaltgewalzt, 1/4 hart, 125 ksi (862 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 5911D SAE AMS 5911D (Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5912D SAE AMS 5912D (Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5913D SAE AMS 5913D (Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength) | 1 | chevron_right |
| SAE AMS 5914C SAE AMS 5914C (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Band und Folie 52.5Ni - 19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen, Präzisionskaltgewalzt, Lösungsgeglüht (Legierung 718 SPF)) | 1 | chevron_right |
| SAE AMS 5915B SAE AMS 5915B (Nickellegierung, Korrosions- und Hitzeresistent, Stangen und Schmiedestücke 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B vakuuminduktions- und mit abschmelzender Elektrode geschmolzen, lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5916B SAE AMS 5916B (Legierung, korrosions- und hitzebeständig, Bleche, Bänder und Platten 35Fe - 24Cr - 37Ni - 0,65Cb (Nb) - 0,2N; geglüht) | 1 | chevron_right |
| SAE AMS 5917 SAE AMS 5917 (Metal Injection Molded Nickelbasis, Legierung 718, heißisostatisch gepresst, lösungsgeglüht und ausgelagert) | 1 | chevron_right |
| SAE AMS 5918 SAE AMS 5918 (Kobaltlegierung, Korrosions- und Hitzeresistent, Stangen, 62Co - 28Cr - 6Mo, warmverformt) | 1 | chevron_right |
| SAE AMS 5919C SAE AMS 5919C (Kobalt-Nickel-Legierung, Korrosions- und Hitzeresistent, Rundstangen, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe, Vakuuminduktions- plus mit abschmelzender Elektrode im Vakuum geschmolzen, lösungsgeglüht und gehärtet, modifizierte Festigkeit) | 1 | chevron_right |
| SAE AMS 5920C SAE AMS 5920C (Kobalt-Nickel-Legierung, Korrosions- und Hitzeresistent, Rundstangen, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe, Vakuuminduktions- plus mit abschmelzender Elektrode im Vakuum geschmolzen, lösungsgeglüht, gehärtet und ausgelagert, modifizierte Festigkeit) | 1 | chevron_right |
| SAE AMS 5922D SAE AMS 5922D (Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C), Premium Aircraft Quality, Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed) | 1 | chevron_right |
| SAE AMS 5923A SAE AMS 5923A (Stahl, korrosionsbeständig, Stangen, Draht und Schmiedestücke und Schmiedematerial 17Cr - 0,52 Mo (0,95 - 1,20 °C) (440 °C) für Lageranwendungen) | 1 | chevron_right |
| SAE AMS 5924 SAE AMS 5924 (Nickellegierung, korrosions- und hitzebeständig, 47,5 Ni - 22 Cr - 1,5 Co - 9,0 Mo - 0,60 W - 18,5 Fe, Pulver für allgemeine Anwendungen, einschließlich Metallspritzguss und Additiv, Herstellung ohne spezielle Kontrollen bei der Pulverherstellung) | 1 | chevron_right |
| SAE AMS 5925C SAE AMS 5925C (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedevorprodukte 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Elektroschlacke-Umschmelzverfahren) | 1 | chevron_right |
| SAE AMS 5926A SAE AMS 5926A (Stahl, korrosionsbeständig, Stäbe, Draht, mechanische Rohre, Schmiedestücke und Schmiedevorprodukte 15,5Cr - 1,5Si - 0,3Mo - 0,1N (0,45 - 0,60C) für Lageranwendungen) | 1 | chevron_right |
| SAE AMS 5928 SAE AMS 5928 (Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 9Ni - 2Mo - 0.7Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5929B SAE AMS 5929B (Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock 11.5Cr - 10Ni - 1.0Al - 0.5Ti - 1.0Cu - 1.0W (S240) Premium Aircraft Quality Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5930C SAE AMS 5930C (Stahl, korrosionsbeständig, Stäbe, Schmiedestücke und Schmiedevorprodukte 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden) | 1 | chevron_right |
| SAE AMS 5931B SAE AMS 5931B (Stahl, verschleiß-, fressbeständig und korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Extrusionen, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke, Ringe und Extrudieren 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5932C SAE AMS 5932C (Stahl, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und mechanische Rohre 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) aufkohlend, Premium Aircraft Quality, unter Vakuum zweifach geschmolzen) | 1 | chevron_right |
| SAE AMS 5933B SAE AMS 5933B (Stahl, korrosionsbeständig, Stäbe and Schmiedestücke 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo umgeschmolzen durch Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden) | 1 | chevron_right |
| SAE AMS 5934/H1000A SAE AMS 5934/H1000A (Stahl, extra hohe Zähigkeit, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuum-Induktions- und Abschmelzelektroden-Schmelzverfahren, lösungsgeglüht, ausscheidungsgehärtet (H1000)) | 1 | chevron_right |
| SAE AMS 5934/H1025 SAE AMS 5934/H1025 (Stahl, extra hohe Zähigkeit, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, ausscheidungsgehärtet (H1025)) | 1 | chevron_right |
| SAE AMS 5934/H1050 SAE AMS 5934/H1050 (Stahl, extra hohe Zähigkeit, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, ausscheidungsgehärtet (H1050)) | 1 | chevron_right |
| SAE AMS 5934/H1100 SAE AMS 5934/H1100 (Stahl, extra hohe Zähigkeit, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, ausscheidungsgehärtet (H1100)) | 1 | chevron_right |
| SAE AMS 5934/H1150 SAE AMS 5934/H1150 (Stahl, extra hohe Zähigkeit, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, ausscheidungsgehärtet (H1150)) | 1 | chevron_right |
| SAE AMS 5934/H950A SAE AMS 5934/H950A (Stahl, extra hohe Zähigkeit, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen, 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vakuuminduktions- plus Abschmelzelektrodengeschmolzen, lösungsgeglüht, ausscheidungsgehärtet (H950)) | 1 | chevron_right |
| SAE AMS 5934C SAE AMS 5934C (Stahl, extra hohe Härte, korrosionsbeständig, Stäbe, Draht, Schmiedestücke, Ringe und Extrusionen 13Cr - 8.0Ni - 2.2Mo - 1.1Al Abschmelzelektroden und Vakuum-Induktions-Schmelzverfahren, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5935A SAE AMS 5935A (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedematerial 12Cr - 10Ni - 2Mo - 0,9Al - 0,3Ti Vakuuminduktion Plus-Vakuum Abschmelzelektrode Schmelzlösungswärmebehandelt, Ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5936D SAE AMS 5936D (Stahl, korrosionsbeständig, Stäbe, Draht und Schmiedestücke 12Cr - 11Ni - 1.7Ti - 1Mo umschmelzen durch Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5937A SAE AMS 5937A (Stahl, korrosionsbeständig, Stäbe, Draht und Schmiedestücke 12Cr - 11Ni - 2Mo 1.5Al 0.3Ti Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden, lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5938B SAE AMS 5938B (Stahl, korrosionsbeständig, Stäbe, Draht, und Schmiedestücke 12Cr - 10Ni - 2Mo 0.9Al 0.3Ti Vakuum-Induktions-Schmelzverfahren und Abschmelzelektroden,lösungsgeglüht, aushärtbar) | 1 | chevron_right |
| SAE AMS 5940E SAE AMS 5940E (Legierung, korrosions- und hitzebeständig, Stäbe, Schmiedestücke und Ringe und Material für Schmieden, Blitzgeschweißte Ringe und Kopfbildung, 34Co - 3.0Cr - 28Ni - 3.0Cb (Nb) - 5.5Al - 0.008B - 25.5Fe mehrfach geschmolzen, Hochtemperatur, oxidationsbeständig, geringe Ausdehnung lösungsgeglüht, aushärtbar (Legierung 783)) | 1 | chevron_right |
| SAE AMS 5950E SAE AMS 5950E (Nickel Alloy, Corrosion- and Heat-Resistant, Sheet and Strip, 52.5Ni - 19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50AI - 18Fe (Inconel 718SPF), Vacuum Induction and Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable) | 1 | chevron_right |
| SAE AMS 5951B SAE AMS 5951B (Nickellegierung, Korrosions- und Hitzeresistent, Blech, Streifen und Grobblech 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, mit abschmelzender Elektrode- und Vakuuminduktionsgeschmolzen, lösungsgeglüht, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5952 SAE AMS 5952 (Nickellegierung, korrosions- und hitzebeständig, Schweiß- und Additive-Manufacturing-Draht 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B (282) Vakuuminduktionsgeschmolzen und Elektroschlacke- oder Vakuum-Umschmelzverfahren, lösungsgeglüht, kaltverformt, ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5955C SAE AMS 5955C (Stahl, korrosionsbeständig, Stäbe, Draht, Schmiedestücke und Schmiedematerial 10Cr – 12Ni – 2Mo – 1,45Al – 1,15Ti Vakuum-Induktion plus Vakuum-Abschmelzelektrode Schmelzlösungswärmebehandelt, Ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 5960B SAE AMS 5960B (Nickellegierung, korrosions- und hitzebeständig, Blech, Band und Folie Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W (Legierung 718+) Vakuuminduktionsgeschmolzen und mit abschmelzender Elektrode umgeschmolzen, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 5961B SAE AMS 5961B (Nickellegierung, korrosions- und hitzebeständig, Draht 74Ni - 15.5Cr - 8.0Fe kaltverformt, federhart) | 1 | chevron_right |
| SAE AMS 5962A SAE AMS 5962A (Nickellegierung, korrosions- und hitzebeständig, Rundstäbe und Draht 52,5 Ni-19 Cr-3,0 Mo-5,1 Cb-0,90 Ti-0,50 Al-19 Fe Verbrauchselektrode oder vakuuminduktionsgeschmolzen 1775 °F (968 °C) lösungsbehandelt und bearbeitet verstärkte Ausfällung Härtbar) | 1 | chevron_right |
| SAE AMS 5964A SAE AMS 5964A (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W, mit abschmelzender Elektrode oder vakuuminduktionsgeschmolzen und umgeschmolzen (718+)) | 1 | chevron_right |
| SAE AMS 5966D SAE AMS 5966D (Nickellegierung, Korrosions- und Hitzeresistent, Schweissdraht 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI (Legierung 263) Mit abschmelzender Elektrode oder Vakuuminduktionsgeschmolzen und Umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6250P SAE AMS 6250P (Steel Bars, Forgings, Mechanical Tubing, and Forging Stock, 1.5Cr - 3.5Ni (0.07 - 0.13C) (3310), Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6255G SAE AMS 6255G (Stahlstangen, Schmiedestücke und mechanische Rohre und Schmiedematerial 1,1Si - 1,45Cr - 1,0Mo - 0,08Al (0,16 - 0,22C) Doppelt vakuumgeschmolzen) | 1 | chevron_right |
| SAE AMS 6256C SAE AMS 6256C (Stahlstäbe, Schmiedestücke und Rohre 1.0Cr - 3.0Ni - 4.5Mo - 0.08Al - 0.38V (0.10 - 0.16C) Premium Aircraft Quality, unter Vakuum zweifach geschmolzen) | 1 | chevron_right |
| SAE AMS 6257G SAE AMS 6257G (Stabstahl, Schmiedestücke, Schmiedestücke und mechanische Rohre 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Verbrauchselektrode Vakuumumgeschmolzen Normalisiert und angelassen) | 1 | chevron_right |
| SAE AMS 6260T SAE AMS 6260T (Stahl, Stäbe, Schmiedestücke und mechanische Rohre und Schmiedevorprodukte 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (9310)) | 2 | chevron_right |
| SAE AMS 6263P SAE AMS 6263P (Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315), Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6264N SAE AMS 6264N (Steel, Carburizing Grade, Bars, Forgings, Mechanical Tubing and Forging Stock, Aircraft Quality, 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (9317)) | 2 | chevron_right |
| SAE AMS 6265R SAE AMS 6265R (Stahl, Stangen, Schmiedestücke, mechanische Rohre und Schmiedematerial 1,2 Cr - 3,25 Ni - 0,12 Mo (0,07 - 0,13 C) (9310) Vakuum-Abschmelzelektrode, umgeschmolzen) | 2 | chevron_right |
| SAE AMS 6266H SAE AMS 6266H (Stahlstäbe, Schmiedestücke und Rohre, 0,50Cr - 1,82Ni - 0,25Mo - 0,003B - 0,06V - (0,08-0,13C)) | 1 | chevron_right |
| SAE AMS 6267L SAE AMS 6267L (Steel Bars, Forgings, Mechanical Tubing and Forging Stock 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310), Premium Aircraft-Quality, Electroslag Remelted or Consumable Electrode Vacuum Remelted) | 2 | chevron_right |
| SAE AMS 6270S SAE AMS 6270S (Stahl, Stäbe, Schmiedestücke und mechanische Rohre und Schmiedevorprodukte Aircraft Quality 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615)) | 2 | chevron_right |
| SAE AMS 6272P SAE AMS 6272P (Stahlstäbe, Schmiedestücke und mechanische Rohre Aircraft Quality 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)) | 2 | chevron_right |
| SAE AMS 6274S SAE AMS 6274S (Stahl, Stäbe, Schmiedestücke und mechanische Rohre 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620)) | 2 | chevron_right |
| SAE AMS 6276N SAE AMS 6276N (Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Premium Aircraft Quality, Consumable Electrode Vacuum Remelted) | 2 | chevron_right |
| SAE AMS 6277K SAE AMS 6277K (Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Premium Aircraft Quality, Vacuum Arc or Electroslag Remelted) | 2 | chevron_right |
| SAE AMS 6278F SAE AMS 6278F (Stahl, Stäbe, Schmiedestücke und Rohre 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) PremiumAircraft Quality, als Lager verwendbar, unter Vakuum zweifach geschmolzen) | 1 | chevron_right |
| SAE AMS 6280N SAE AMS 6280N (Stahlstangen, Schmiedestücke, Ringe und Schmiedematerial, 0,50 Cr – 0,55 Ni – 0,20 Mo (0,28 – 0,33 C) (SAE 8630)) | 2 | chevron_right |
| SAE AMS 6281L SAE AMS 6281L (Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6282L SAE AMS 6282L (Steel Tubing, Mechanical Aircraft Quality 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)) | 2 | chevron_right |
| SAE AMS 6290L SAE AMS 6290L (Stahl, Stäbe, Schmiedestücke und Schmiedevorprodukte, karburierend 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615)) | 2 | chevron_right |
| SAE AMS 6292L SAE AMS 6292L (Stahlstäbe und Schmiedestücke und Schmiedevorprodukte, karburierend, Luftfahrtqualität, 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617)) | 2 | chevron_right |
| SAE AMS 6294L SAE AMS 6294L (Stahlstäbe und Schmiedestücke und Schmiedevorprodukte, karburierend, Luftfahrtqualität 1.8Ni - 0.25Mo (0.17 - 0.22C) (4620)) | 2 | chevron_right |
| SAE AMS 6299H SAE AMS 6299H (Stahlstäbe, Schmiedestücke und mechanische Rohre und Schmiedevorprodukte, karburierend, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)) | 1 | chevron_right |
| SAE AMS 6300J SAE AMS 6300J (Steel Bars, Forgings and Forging Stock 0.25Mo (0.35 - 0.40C) (SAE 4037) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6302L SAE AMS 6302L (Niedriglegierter Stahl, hitzebeständig, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)) | 1 | chevron_right |
| SAE AMS 6303K SAE AMS 6303K (Stahlstäbe, Schmiedestücke und Schmiedevorprodukte, niedriglegiert, hitzebeständig 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C)) | 1 | chevron_right |
| SAE AMS 6304N SAE AMS 6304N (Niedrig legierter, hitzebeständiger Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedestücke 0,95Cr - 0,55Mo - 0,30V (0,40 - 0,50C)) | 1 | chevron_right |
| SAE AMS 6305H SAE AMS 6305H (Stahl, hitzebeständig, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vakuum-Lichtbogen-Umschmelzen) | 1 | chevron_right |
| SAE AMS 6308G SAE AMS 6308G (Stahl, Stangen und Schmiedestücke und Schmiedevorprodukte 0.90Si - 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vakuumlichtbogen- oder Elektroschlacke-umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6312L SAE AMS 6312L (Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640), Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6317L SAE AMS 6317L (Stahlstäbe und Schmiedestücke 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) wärmebehandelt, 125 ksi (862 MPa) Zugfestigkeit) | 2 | chevron_right |
| SAE AMS 6320R SAE AMS 6320R (Stahlstäbe, Schmiedestücke, Ringe und Schmiedevorprodukte 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735)) | 2 | chevron_right |
| SAE AMS 6322S SAE AMS 6322S (Stahlstäbe, Schmiedestücke und Ringe und Vormaterial für Schmiedestücke oder abbrennstumpfgeschweißte Ringe, Luftfahrtqualität 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (8740)) | 2 | chevron_right |
| SAE AMS 6323N SAE AMS 6323N (Stahl, mechanische Rohre 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)) | 2 | chevron_right |
| SAE AMS 6324L SAE AMS 6324L (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte Aircraft Quality 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (8740 modifiziert)) | 1 | chevron_right |
| SAE AMS 6325L SAE AMS 6325L (Steel, Bars, and Forgings, Aircraft Quality, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 105 ksi (724 MPa) Tensile Strength) | 2 | chevron_right |
| SAE AMS 6327M SAE AMS 6327M (Stahlstäbe und Schmiedestücke 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) wärmebehandelt, 125 ksi (862 MPa) Zugfestigkeit) | 2 | chevron_right |
| SAE AMS 6328P SAE AMS 6328P (Stahl, Stäbe, Schmiedestücke, Mechanische Rohre und Schmiedevorprodukte 0.50Cr - 0.55Ni - 0.25Mo (0.48 bis 0.53C) (8750)) | 2 | chevron_right |
| SAE AMS 6330K SAE AMS 6330K (Stangenstahl, Schmiedestücke, mechanische Rohre und Schmiedematerial 0,65 Cr - 1,25 Ni (0,33 - 0,38 C)) | 1 | chevron_right |
| SAE AMS 6331B SAE AMS 6331B (Stahl, Schweißdraht 0.50Cr - 0.55Ni - 0.20Mo - (0.33 - 0.38C) (SAE 8735) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6340D SAE AMS 6340D (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Premium Luftfahrzeugqualität, mit abschmelzender Elektrode im Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6342K SAE AMS 6342K (Stahlstäbe, Schmiedestücke und Rohre 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840)) | 2 | chevron_right |
| SAE AMS 6345F SAE AMS 6345F (Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Aircraft Quality, Normalized or Otherwise Heat Treated) | 2 | chevron_right |
| SAE AMS 6346D SAE AMS 6346D (Stahlstäbe 0.95Cr - 0.20Mo (0.28 bis 0.33C) Luftfahrtqualität gehärtet und angelassen, 125 Ksi (862 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 6348F SAE AMS 6348F (Stahl, Stäbe Aircraft Quality 0.95Cr - 0.20Mo (0.28 to 0.33C) (4130) normalgeglüht) | 2 | chevron_right |
| SAE AMS 6349F SAE AMS 6349F (Stahlstäbe 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) normalgeglüht) | 2 | chevron_right |
| SAE AMS 6350R SAE AMS 6350R (Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6351M SAE AMS 6351M (Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Aircraft Quality, Spheroidized) | 2 | chevron_right |
| SAE AMS 6352M SAE AMS 6352M (Stahl, Feinblech, Bandstahl und Grobblech 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135)) | 2 | chevron_right |
| SAE AMS 6354H SAE AMS 6354H (Steel, Sheet, Strip, and Plate 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) (NAX 9115-AC)) | 1 | chevron_right |
| SAE AMS 6355L SAE AMS 6355L (Stahl, Feinblech, Bandstahl und Grobblech 0.50cr - 0.55ni - 0.20mo (0.28 -0.33c) (SAE 8630)) | 1 | chevron_right |
| SAE AMS 6356K SAE AMS 6356K (Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C) (SAE 4132), Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6357N SAE AMS 6357N (Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6358M SAE AMS 6358M (Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6359M SAE AMS 6359M (Steel, Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6360R SAE AMS 6360R (Stahl mechanische Rohre, nahtlos 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Aircraft Quality, normalgeglüht und angelassen oder spannungsarmgeglüht) | 1 | chevron_right |
| SAE AMS 6361H SAE AMS 6361H (Stahlrohre, nahtlos 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Flugzeugqualität, 125 ksi (862 MPa) Zugfestigkeit) | 2 | chevron_right |
| SAE AMS 6362J SAE AMS 6362J (Stahlrohre, nahtlos 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Flugzeugqualität 150 ksi (1034 MPa) Zugfestigkeit) | 2 | chevron_right |
| SAE AMS 6365M SAE AMS 6365M (Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.33 - 0.38C) (4135), Aircraft-Quality, Normalized and Tempered or Stress Relieved) | 2 | chevron_right |
| SAE AMS 6370S SAE AMS 6370S (Steel Bars, Forgings, Rings and Stock for Forging and Flash-Welded Rings 0.95Cr - 0.20Mo (0.28 - 0.33C), (SAE 4130) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6371M SAE AMS 6371M (Stahl, mechanische Rohre 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)) | 2 | chevron_right |
| SAE AMS 6372P SAE AMS 6372P (Stahl, mechanische Rohre 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135)) | 2 | chevron_right |
| SAE AMS 6373K SAE AMS 6373K (Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6374F SAE AMS 6374F (Steel Tubing, Seamless, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95 ksi (655 MPa) Tensile Strength Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6375F SAE AMS 6375F (Steel, Welding Wire, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Vacuum Melted, Environment Controlled Packaging) | 1 | chevron_right |
| SAE AMS 6378J SAE AMS 6378J (Stahlstäbe 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) gezogen, 130 ksi (896 MPa) Streckgrenze, Automatenstahl) | 1 | chevron_right |
| SAE AMS 6379B SAE AMS 6379B (Stahlstangen 0.95Cr - 0.20Mo - 0.05Te (0.40 - 0.53C) SAE 4140 Modified Die Drawn und angelassen, 165,000 psi (1138 MPa) Streckgrenze) | 1 | chevron_right |
| SAE AMS 6381K SAE AMS 6381K (Stahl, mechanische Rohre 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140)) | 2 | chevron_right |
| SAE AMS 6382S SAE AMS 6382S (Stahl, Stäbe, Schmiedestücke, Ringe und Vormaterial für Schmiedestücke oder abbrennstumpfgeschweißte Ringe, Luftfahrtqualität, 0.95Cr - 0.20Mo (0.38 - 0.43C) (4140) geglüht) | 2 | chevron_right |
| SAE AMS 6385N SAE AMS 6385N (Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C) [17-22A(S)] Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6386C SAE AMS 6386C (Stahl, Feinblech und Grobblech, niedriglegiert, wärmebehandelt, 90,000 psi (621 MPa) und 100,000 psi (690 MPa) Zugfestigkeit) | 12 | chevron_right |
| SAE AMS 6390D SAE AMS 6390D (Stahl, Feinblech, Bandblech und Grobblech, (0.95Cr 0.20Mo (0.38 0.43C))) | 2 | chevron_right |
| SAE AMS 6395K SAE AMS 6395K (Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.38 - 0.43C) (SAE 4140) Aircraft Quality) | 2 | chevron_right |
| SAE AMS 6396H SAE AMS 6396H (Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) (SAE 4350) Aircraft Quality Annealed) | 1 | chevron_right |
| SAE AMS 6406D SAE AMS 6406D (Feinblech, Bandstahl und Grobblech 1,6Si - 2,1Cr - 0,58Mo - 0,05V - (0,41-0,46C) geglüht) | 1 | chevron_right |
| SAE AMS 6407L SAE AMS 6407L (Stahl, Stäbe, Schmiedestücke und Rohre 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C)) | 1 | chevron_right |
| SAE AMS 6408F SAE AMS 6408F (Stahl, Warmarbeitswerkzeug, Stäbe und Schmiedestücke und Schmiedevorprodukte 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13) Elektroschlacke-Umschmelzverfahren (ESR) oder Abschmelzelektroden, unter Vakuum-Lichtbogen umgeschmolzen (VAR) geglüht) | 1 | chevron_right |
| SAE AMS 6409F SAE AMS 6409F (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedestücke 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Spezielle Flugzeugqualität Reinheit Normalisiert und vergütet) | 1 | chevron_right |
| SAE AMS 6411K SAE AMS 6411K (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 0.88Cr -1.8Ni -0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Abschmelzelektrode, umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6412R SAE AMS 6412R (Steel, Bars, Forgings and Forging Stock, 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337), Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6413N SAE AMS 6413N (Stahl, mechanische Rohre 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337)) | 1 | chevron_right |
| SAE AMS 6414N SAE AMS 6414N (Stahl, Stäbe, Schmiedestücke, Mechanische Rohre und Schmiedevorprodukte 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Abschmelzelektrode, unter Vakuum umgeschmolzen) | 2 | chevron_right |
| SAE AMS 6415V SAE AMS 6415V (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)) | 2 | chevron_right |
| SAE AMS 6417K SAE AMS 6417K (Stahl, Stäbe, Schmiedestücke und Rohre 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Abschmelzelektroden, unter Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6418H SAE AMS 6418H (Stahlstäbe, Schmiedestücke, Rohre und Ringe 1.3Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C)) | 1 | chevron_right |
| SAE AMS 6419K SAE AMS 6419K (Stahl, Stäbe, Schmiedestücke und Rohre 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Abschmelzelektroden, unter Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6421J SAE AMS 6421J (Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37), Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6422M SAE AMS 6422M (Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (98BV40 Mod), Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6423K SAE AMS 6423K (Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 0.92Cr - 0.75Ni - 0.52Mo - 0.003B - 0.04V (98BV40), Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6424H SAE AMS 6424H (Stangenstahl, Schmiedestücke, mechanische Rohre und Schmiedematerial 0,80 Cr – 1,8 Ni – 0,25 Mo (0,49 – 0,55 C)) | 1 | chevron_right |
| SAE AMS 6425F SAE AMS 6425F (Stahl, Stäbe, Schmiedestücke und Rohre 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Abschmelzelektroden, unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 6426F SAE AMS 6426F (Stahlstäbe, Schmiedestücke und Rohre 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Abschmelzelektroden, unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 6427P SAE AMS 6427P (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte Aircraft Quality 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod)) | 1 | chevron_right |
| SAE AMS 6428M SAE AMS 6428M (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte Aircraft Quality 0.78Cr-1.8Ni-0.35Mo-0.20V (0.32-0.38C) (4335 Mod)) | 1 | chevron_right |
| SAE AMS 6429K SAE AMS 6429K (Stahlstäbe, Schmiedestücke, mechanische Rohre, Ringe und Material für Schmiedestücke und Ringe 0,78Cr - 1,8Ni - 0,35Mo - 0,20V (0,33 - 0,38C) (4335 Mod) Premium Flugzeugqualität, Abschmelzelektroden, unter Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6430K SAE AMS 6430K (Stahl, Stäbe, Schmiedestücke, Rohre und Ringe 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 modifiziert)) | 1 | chevron_right |
| SAE AMS 6431R SAE AMS 6431R (Stahl, Stangen, Schmiedeteile, mechanische Rohre und Schmiedematerial; 1,05 Cr - 0,55 Ni - 1,0 Mo - 0,11 V (0,45 - 0,50 C) (D6AC); Vakuumverbrauchbare Elektrode umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6432C SAE AMS 6432C (Stahlstäbe, Schmiedestücke und Rohre 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.43 - 0.49C)) | 1 | chevron_right |
| SAE AMS 6433J SAE AMS 6433J (Stahl, Feinblech, Bandstahl und Grobblech 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod)) | 1 | chevron_right |
| SAE AMS 6434J SAE AMS 6434J (Stahl, Bleche, Bänder und Platten 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)(4335 Mod)) | 1 | chevron_right |
| SAE AMS 6435H SAE AMS 6435H (Stahl, Blech, Streifen und Grobblech 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0,33 - 0,38 C) (Mod-4335) Im Vakuum abschmelzende Elektrode, geglüht) | 1 | chevron_right |
| SAE AMS 6436C SAE AMS 6436C (Feinblech, Bandstahl und Grobblech, niedriglegiert, hitzebeständig, 0,65Si - 1,25Cr - 0,50Mo - 0,85V - (0,25-0,30C)) | 1 | chevron_right |
| SAE AMS 6437L SAE AMS 6437L (Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6438G SAE AMS 6438G (Stahl, Feinblech, Bandstahl und Grobblech 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Abschmelzelektroden unter Vakuum) | 1 | chevron_right |
| SAE AMS 6439F SAE AMS 6439F (Stahl, Feinblech, Bandstahl und Grobblech 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Abschmelzelektroden, unter Vakuum geschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6440T SAE AMS 6440T (Stahl, Stäbe, Schmiedestücke und Rohre 1.45Cr (0.93 - 1.05C) (SAE 52100), als Lager verwendbar) | 1 | chevron_right |
| SAE AMS 6442G SAE AMS 6442G (Stahlstäbe und Schmiedestücke 0.50Cr (0.98 - 1.10C) (SAE 50100), für Lager verwendbar) | 1 | chevron_right |
| SAE AMS 6443G SAE AMS 6443G (Stahlstäbe, Schmiedestücke und Rohre 1.0Cr (0.98 - 1.10C) (SAE 51100) Abschmelzelektrode, unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 6444P SAE AMS 6444P (Stahl, Stäbe, Schmiedestücke und Rohre 1.45Cr (0.93 - 1.05C) (SAE 52100) PremiumAircraft Quality, Abschmelzelektroden, unter Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6445G SAE AMS 6445G (Stahl, Stäbe, Schmiedestücke und Rohre 1.05Cr - 1.1Mn (0.92 - 1.02C) (Modified 51100) unter Vakuum geschmolzen, Abschmelzelektroden) | 1 | chevron_right |
| SAE AMS 6446E SAE AMS 6446E (Stahl, Stäbe, Schmiedestücke und Rohre 1.0Cr (0.98 - 1.10C) (SAE 51100) Elektroschlacke-Umschmelzverfahren) | 1 | chevron_right |
| SAE AMS 6447J SAE AMS 6447J (Stahl, Stäbe, Schmiedestücke und Rohre 1.4Cr (0.98 - 1.10C) (SAE 52100) Elektroschlacke-Umschmelzverfahren) | 1 | chevron_right |
| SAE AMS 6448N SAE AMS 6448N (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte Aircraft Quality 0.95Cr - 0.22V (0.48 - 0.53C) (6150)) | 1 | chevron_right |
| SAE AMS 6449E SAE AMS 6449E (Stahl, Stäbe, Schmiedestücke und Rohre 1.0Cr (0.98 - 1.10C) (SAE 51100) als Lager verwendbar) | 1 | chevron_right |
| SAE AMS 6450L SAE AMS 6450L (Stahl, Federdraht 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) geglüht und kaltgezogen) | 1 | chevron_right |
| SAE AMS 6451D SAE AMS 6451D (Stahl, Federdraht 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) ölvergütet) | 1 | chevron_right |
| SAE AMS 6452E SAE AMS 6452E (Stahl, Schweißdraht 0.95Cr - 0.20Mo (0.38 - 0.43C) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6453D SAE AMS 6453D (Stahl, Schweißdraht 0.30Cr - 1.8Ni - 0.40Mo - (0.23 - 0.28C) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6454G SAE AMS 6454G (Stahl, Feinblech, Bandstahl und Grobblech 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) umgeschmolzen mit Abschmelzelektroden unter Vakuum) | 2 | chevron_right |
| SAE AMS 6455M SAE AMS 6455M (Stahl, Feinblech, Bandstahl und Grobblech 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150)) | 1 | chevron_right |
| SAE AMS 6456E SAE AMS 6456E (Stahl, Schweißdraht 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4340 Mod) unter Vakuum geschmolzen, EnvEisenment-Controlled Packaging) | 1 | chevron_right |
| SAE AMS 6457E SAE AMS 6457E (Stahl, Schweißdraht 0.95Cr - 0.20Mo (0,28 - 0,33 C) (SAE 4130) Vakuum geschmolzen, in kontrollierter Umgebung verpackt) | 1 | chevron_right |
| SAE AMS 6458L SAE AMS 6458L (Steel, Welding Wire, 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) [17-22A(S)], Vacuum Melted, Environment Controlled Packaging) | 1 | chevron_right |
| SAE AMS 6459F SAE AMS 6459F (Stahl, Schweißdraht 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C) unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 6460G SAE AMS 6460G (Draht, Schweißstahl 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)) | 1 | chevron_right |
| SAE AMS 6461K SAE AMS 6461K (Stahl, Schweißdraht 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6462K SAE AMS 6462K (Stahl, Schweißdraht 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130)) | 1 | chevron_right |
| SAE AMS 6463G SAE AMS 6463G (Draht, Schweißsstahl 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al, (Marage 300), unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6464G SAE AMS 6464G (Schweißelektroden, ummantelt, Stahl 1.05Mo - 0.20V (0.06 - 0.12C)) | 1 | chevron_right |
| SAE AMS 6465E SAE AMS 6465E (Draht, Stahlschweißen 2.0Cr - 10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0,10 - 0,14 C) (HY-180) Vakuumgeschmolzen, Verpackung in kontrollierter Umgebung) | 1 | chevron_right |
| SAE AMS 6466G SAE AMS 6466G (Stahl, korrosionsbeständig, Schweißdraht 5.2Cr - 0.55Mo) | 1 | chevron_right |
| SAE AMS 6467E SAE AMS 6467E (Stahl, Schweißelektroden, ummantelt 5Cr - 0.55Mo) | 1 | chevron_right |
| SAE AMS 6468F SAE AMS 6468F (Stahl, Schweißdraht 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 - 0.17C) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6469D SAE AMS 6469D (Stahl, Schweißdraht 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) unter Vakuum geschmolzen, EnvEisenment-Controlled Packaging) | 1 | chevron_right |
| SAE AMS 6470R SAE AMS 6470R (Steel, Nitriding, Bars, Forgings, Mechanical Tubing, and Forging Stock 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6471J SAE AMS 6471J (Stahl, Nitrierhärten, Stäbe, Schmiedestücke und Rohre 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) Abschmelzelektroden unter Vakuum) | 1 | chevron_right |
| SAE AMS 6472H SAE AMS 6472H (Stahl, Stäbe und Schmiedestücke und Schmiedevorprodukte, Nitrierhärten 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) (135 Mod), Luftfahrtqualität, gehärtet und angelassen, 112 ksi (772 MPa) Zugfestigkeit) | 1 | chevron_right |
| SAE AMS 6473B SAE AMS 6473B (Stahl, Schweißdraht 0.88Cr - 1.8Ni - 1.6Co - 0.42Mo - 0.08V - (0.28 - 0.33C) (SAE 4330V) unter Vakuum verpackt, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6475M SAE AMS 6475M (Stahl, Nitrieren, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte Aircraft Quality 1.1Cr - 3.5Ni - 0.25Mo - 1.2Al (0.21 - 0.26C)) | 1 | chevron_right |
| SAE AMS 6476F SAE AMS 6476F (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedestücke 0.50Cr - 0.12Mo (0.89 - 1.01C)) | 1 | chevron_right |
| SAE AMS 6477E SAE AMS 6477E (Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr (0.90 - 1.03C), For Bearing Applications) | 1 | chevron_right |
| SAE AMS 6478B SAE AMS 6478B (Stahl, Stäbe und Schmiedestücke 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) unter Vakuum geschmolzen, geglüht, bei Wärmebehandlung bis zu 90 ksi (1999 MPa) Zugfestigkeit.) | 1 | chevron_right |
| SAE AMS 6479E SAE AMS 6479E (Stahl, Stangen, Schmiedeteile und Rohre 1.45Cr (0,93 - 1.05 C) (SAE 52100) spezielle Sauberkeit Flugzeugqualität) | 1 | chevron_right |
| SAE AMS 6481E SAE AMS 6481E (Nitrieren von Stahlstangen, Schmiedeteilen, mechanischen Rohren und Schmiedeteilen; 3Cr - 1Mo - 0,2 V - (0,29 - 0,36 C); Erstklassige Flugzeugqualität für Lageranwendungen; Doppelt vakuumgeschmolzen) | 1 | chevron_right |
| SAE AMS 6482C SAE AMS 6482C (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte, 1.5Si - 1.25Cr - 3.8Ni - 0.50Mo - 0.30V (0.40C) unter Vakuum umgeschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6484F SAE AMS 6484F (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) normalisiert und angelassen) | 2 | chevron_right |
| SAE AMS 6485H SAE AMS 6485H (Stahlstäbe und Schmiedestücke 5.0Cr - 1.3Mo - 0.5V (0.38 - 0.43C)) | 1 | chevron_right |
| SAE AMS 6487M SAE AMS 6487M (Stahl, Stäbe, Schmiedestücke und Schmiedematerial 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Verbrauchselektrode Vakuum Wiedereinschmelzung) | 1 | chevron_right |
| SAE AMS 6488H SAE AMS 6488H (Stahl, Stäbe und Schmiedestücke 5.0Cr - 1.3Mo - 0.5V - (0.38 - 0.43C)) | 1 | chevron_right |
| SAE AMS 6490K SAE AMS 6490K (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft Quality, für Lager verwendbar, Abschmelzelektroden, unter Vakuum geschmolzen) | 1 | chevron_right |
| SAE AMS 6491G SAE AMS 6491G (Steel Bars, Forgings, Mechanical Tubing and Forging Stock 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted) | 1 | chevron_right |
| SAE AMS 6492C SAE AMS 6492C (Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6493C SAE AMS 6493C (Steel Bars, Forgings, Tubing, and Forging Stock 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft Quality) | 1 | chevron_right |
| SAE AMS 6494C SAE AMS 6494C (Stabstahl, Schmiedestücke, mechanische Rohre und Schmiedestücke 1.0Cr - 2.50Ni - 2.0Mo - 1.10Si (0.10 - 0.20C) in Flugzeug-Qualität) | 1 | chevron_right |
| SAE AMS 6495C SAE AMS 6495C (Stahlstäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte 1.0Cr - 2.50Ni - 2.0Mo - 1.10Si (0.10 - 0.20C) Premium Aircraft Quality, Elektroschlacke-umgeschmolzen oder mit abschmelzender Elektrode im Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6496C SAE AMS 6496C (Steel Bars, Forgings, Mechanical Tubing and Forging Stock, Nitriding, 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) (32CrMoNiV5), Aircraft-Quality for Bearing Applications) | 1 | chevron_right |
| SAE AMS 6497B SAE AMS 6497B (Stahlstangen, Schmiedestücke und Rohre, Nitrierhärten 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C), Elektroschlacke-umgeschmolzen oder mit abschmelzender Elektrode im Vakuum umgeschmolzen, Premium Luftfahrzeugqualität für Lageranwendungen) | 1 | chevron_right |
| SAE AMS 6498C SAE AMS 6498C ((R) Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) (32CrMoNiV5), Double Vacuum Melted, Premium Aircraft-Quality for Bearing Applications) | 1 | chevron_right |
| SAE AMS 6499C SAE AMS 6499C (Stahl, Stäbe, Schmiedestücke, mechanische Rohre und Schmiedevorprodukte, 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Premium Flugzeugqualität, unter Vakuum zweifach geschmolzen) | 1 | chevron_right |
| SAE AMS 6501E SAE AMS 6501E (Stahl, martensitaushärtend, Schweißdraht 18Ni - 8.0Co - 4.9Mo - 0.40Ti - 0.10Al Vakuum-Induktions-Schmelzverfahren, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6509B SAE AMS 6509B (Stahlstangen und Schmiedestücke 3.5Cr – 7.5Ni – 16.3Co – 1.75Mo – 0.2W – (0.09-0.13C) Doppelvakuumgeschmolzen, Normalgeglüht, Geglüht) | 1 | chevron_right |
| SAE AMS 6511C SAE AMS 6511C (Stahl, martensitaushärtend, Stäbe, Schmiedestücke, mechanische Rohre, Ringe und Vormaterial für Schmiedestücke und Ringe 18Ni - 8,5Co - 3,2Mo - 0,20Ti - 0,10Al unter Vakuum zweifach geschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6512J SAE AMS 6512J (Martensitaushärtender Stahl, Stäbe, Schmiedestücke, mechanische Rohre, Ringe und Schmiedestücke 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Verbrauchselektrode Vakuumgeschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6514K SAE AMS 6514K (Stahl, Maraging, Stangen, Schmiedeteile, mechanische Rohre, Ringe und Schmiedematerial; 18,5Ni - 9,0Co - 4,9Mo - 0,65Ti - 0,10Al; Verbrauchselektrode vakuumgeschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6515B SAE AMS 6515B (Stahl, martensitaushärtend, Stäbe, Schmiedestücke, Rohre und Ringe 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al unter Vakuum zweifach geschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6516C SAE AMS 6516C (Stahl, Stangen und Schmiedeteile und Schmiedematerial 1Cr - 10Ni - 7Co - 2Mo - 1,3W - 0,1V - (0,28 - 0,32C) Vakuum-Induktion geschmolzen, Vakuum-Lichtbogen-umgeschmolzen, normalisiert und geglühte Fällung härtbar) | 1 | chevron_right |
| SAE AMS 6517C SAE AMS 6517C (Steel, Bars, Forgings and Forging Stock 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) (Ferrium C61) Premium Aircraft Quality, Double Vacuum Melted, Normalized, Annealed) | 1 | chevron_right |
| SAE AMS 6518C SAE AMS 6518C (Stahl, Feinblech, Bandstahl und Grobblech, martensitaushärtend 19Ni - 3.0Mo - 1.4Ti - 0.10AI unter Vakuum zweifach geschmolzen, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6519F SAE AMS 6519F (Stahl, martensitaushärtend, Stäbe, Schmiedestücke, mechanische Rohre, abbrennstumpfgeschweißte Ringe und Vormaterial für Schmiedestücke und abbrennstumpfgeschweißte Ringe, 19Ni - 3.0Mo - 1.4Ti - 0.10Al (Legierung T250), Premiumqualität für Luftfahrt, unter Vakuum zweifach geschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6520E SAE AMS 6520E (Stahl, martensistaushärtend, Feinblech, Bandstahl und Grobblech 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10AI Abschmelzelektroden, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6521C SAE AMS 6521C (Stahl, Feinblech, Bandstahl und Grobblech, martensitaushärtend 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10AI Abschmelzelektroden, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6522D SAE AMS 6522D (Stahlblech 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) unter Vakuum geschmolzen, normalgeglüht und überaltert) | 1 | chevron_right |
| SAE AMS 6523J SAE AMS 6523J (Stahl, Feinblech, Bandstahl und Grobblech 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Abschmelzelektroden unter Vakuum, geglüht) | 2 | chevron_right |
| SAE AMS 6524E SAE AMS 6524E (Stahl, Feinblech, Bandstahl und Grobblech 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Abschmelzelektroden unter Vakuum, geglüht) | 2 | chevron_right |
| SAE AMS 6525F SAE AMS 6525F (Stahl, Stangen, Schmiedestücke, mechanische Rohre, Ringe und Lager für Schmiedestücke und Ringe; 0,75 Cr - 9,0 Ni - 4,5 Co - 1,0 Mo - 0,09 V (0,17 - 0,23 C); Verbrauchselektrode vakuumgeschmolzen, geglüht) | 2 | chevron_right |
| SAE AMS 6526J SAE AMS 6526J (Stahl, Stangen, Schmiedestücke, mechanische Rohre, Ringe und Lager für Schmiedestücke und Ringe; 1,0 Cr - 7,5 Ni - 4,5 Co - 1,0 Mo - 0,09 V (0,29 - 0,34 C); Verbrauchselektrode vakuumumgeschmolzen, geglüht, SAE AMS 6526J) | 2 | chevron_right |
| SAE AMS 6527G SAE AMS 6527G (Stahl, Stangen, Schmiedestücke und Schmiedevorprodukte 2,0Cr - 10Ni - 14Co - 1,0Mo (0,15 - 0,19C) unter Vakuum geschmolzen, normalisiert und überaltert) | 1 | chevron_right |
| SAE AMS 6528E SAE AMS 6528E (Stahl, Stäbe 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), besondere Aircraft Quality, rein, normalgeglüht) | 2 | chevron_right |
| SAE AMS 6529E SAE AMS 6529E (Stahl, Stäbe 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) besondere Aircraft Quality, rein, normalgeglüht) | 2 | chevron_right |
| SAE AMS 6532L SAE AMS 6532L (Stahl, Stangen und Schmiedestücke und Schmiedematerial; 3,1 Cr - 11,5 Ni - 13,5 Co - 1,2 Mo (0,21 - 0,25 C); Vakuumgeschmolzen, normalisiert und überaltert; Ausscheidungshärtbar) | 1 | chevron_right |
| SAE AMS 6533D SAE AMS 6533D (Stahl, Schweißdraht 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) unter Vakuum geschmolzen, umweltfreundliche Verpackung) | 1 | chevron_right |
| SAE AMS 6535H SAE AMS 6535H (Stahlrohre, nahtlos, 0.50Cr 0.55Ni 0.20Mo (0.28 0.33C)) | 2 | chevron_right |
| SAE AMS 6539A SAE AMS 6539A (Stahlstangen, Schmiedestücke und Rohre 1.7Cr – 3.8Ni – 0.3Mo (0.32 – 0.38 C) Luftfahrzeugqualität) | 1 | chevron_right |
| SAE AMS 6543G SAE AMS 6543G (Stahl, Stangen und Schmiedestücke, 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0,10 - 0,14 C) (HY-180), Doppel-Vakuum geschmolzen, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6544F SAE AMS 6544F (Stahl, Grobblech 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) unter Vakuum zweifach geschmolzen, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6546F SAE AMS 6546F (Stahl, Feinblech, Bandstahl und Grobblech 0,48Cr - 8,0Ni - 4,0Co - 4,48Mo - 0,09V - (0,24 - 0,30C) Abschmelzelektroden, geglüht) | 1 | chevron_right |
| SAE AMS 6547A SAE AMS 6547A (Stahlstangen, Schmiedestücke und Rohre 1.0Cr - 3.2Ni - 0.2Mo (0.12 - 0.17C) Luftfahrzeugqualität) | 1 | chevron_right |
| SAE AMS 6548A SAE AMS 6548A (Stahlstangen, Schmiedestücke und Rohre 1.0Cr – 3.2Ni – 0.2Mo (0.12 – 0.17C), Elektroschlacke-umgeschmolzen oder mit abschmelzender Elektrode im Vakuum umgeschmolzen) | 1 | chevron_right |
| SAE AMS 6549A SAE AMS 6549A (Stahlstangen, Schmiedestücke und Rohre 1.0Cr – 3.2Ni – 0.2Mo (0.12 – 0.17C), Doppelvakuum-geschmolzen, Premium Luftfahrzeugqualität) | 1 | chevron_right |
| SAE AMS 6550J SAE AMS 6550J (Stahlrohre, geschweißt 0.50Ni 0.55Cr 0.20Mo (0.28 0.33C) (SAE 8630)) | 2 | chevron_right |
| SAE AMS 6551A SAE AMS 6551A (Stahlstangen, Schmiedestücke und Rohre 1.75 Cr – 4.0 Ni – 0.5 Mo – (0.35-0.40 C), mit abschmelzender Elektrode im Vakuum umgeschmolzen, Premium Luftfahrzeugqualität) | 1 | chevron_right |
| SAE AMS 6556A SAE AMS 6556A (Stahl, Stangen, Draht und Schmiedestücke 8V - 4Cr - 4W - 3Mo (2.45 - 2.55C) Pulvermetallurgieprodukt, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 6557A SAE AMS 6557A (Stahl, Stangen, Drähte und Schmiedestücke 9V - 5.25Cr - 1.3Mo (1.80 - 1.95C) Pulvermetallurgieprodukt, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 6558A SAE AMS 6558A (Stahl, Stangen, Drähte und Schmiedestücke 10.5 Mo - 6 W - 3.75 Cr - 2 V (1.25 - 1.40 C) Pulvermetallurgieprodukt, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 6559A SAE AMS 6559A (Stahl, Stangen, Drähte und Schmiedestücke 9.75 V - 5.25 Cr - 1.3 Mo (2.40 - 2.55 C) Pulvermetallurgieprodukt, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 6560A SAE AMS 6560A (Stahlstangen, Drähte und Schmiedestücke 10 Co - 7 Mo - 6 V - 6 W - 4 Cr (2.2 - 2.4C) Premium Luftfahrzeugqualität für Lageranwendungen Schutzgasverdüsung und heißisostatisch gepresst, verfestigt) | 1 | chevron_right |
| SAE AMS 6562/1 SAE AMS 6562/1 (Mittlere Temperatur, Außerhalb-Autoklav, Ofen-Vakuum-Beutel-Härtung Epoxidharz-imprägnierte Faserverstärkte Verbundwerkstoffe, Typ 35, Klasse 4, Stufe 293, Stil 7781) | 1 | chevron_right |
| SAE AMS 6900D SAE AMS 6900D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 5Al - 2.5Sn, geglüht) | 1 | chevron_right |
| SAE AMS 6901D SAE AMS 6901D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 5Al - 2.5Sn, extra low interstitial (ELI) geglüht) | 1 | chevron_right |
| SAE AMS 6904 SAE AMS 6904 (Titanium Alloy, Bars, Forgings, and Flash-Welded Rings, 5.0Al - 2.5V - 4.0Sn - 1.0Co - 0.8Fe, Solution Heat Treated and Aged) | 1 | chevron_right |
| SAE AMS 6905D SAE AMS 6905D (Titanium Alloy Bars and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed) | 1 | chevron_right |
| SAE AMS 6906D SAE AMS 6906D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 6907D SAE AMS 6907D (Titanium Alloy Bars and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, Duplex Annealed) | 1 | chevron_right |
| SAE AMS 6910D SAE AMS 6910D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 8Al - 1Mo - 1V, duplex geglüht) | 1 | chevron_right |
| SAE AMS 6915D SAE AMS 6915D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 7.0Al - 4.0Mo, geglüht) | 1 | chevron_right |
| SAE AMS 6920E SAE AMS 6920E (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 3Al - 8V - 6Cr - 4Mo - 4Zr, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6921C SAE AMS 6921C (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 3Al - 8V - 6Cr - 4Mo - 4Zr, lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 6925D SAE AMS 6925D (Titanlegierung Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 13V - 11Cr - 3Al, lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 6926D SAE AMS 6926D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden 13V - 11Cr - 3Al, lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 6930G SAE AMS 6930G (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 6.0Al - 4.0V lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 6931D SAE AMS 6931D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 6.0Al - 4.0V, geglüht) | 1 | chevron_right |
| SAE AMS 6932D SAE AMS 6932D (Titanium Alloy Bars and Forging Stock, 6.0Al - 4.0V Extra Low Interstitial, Annealed) | 1 | chevron_right |
| SAE AMS 6935D SAE AMS 6935D (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 6.0Al - 6.0V - 2.0Sn, lösungsgeglüht, gealtert) | 1 | chevron_right |
| SAE AMS 6936C SAE AMS 6936C (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 6Al - 6V - 2Sn, geglüht) | 1 | chevron_right |
| SAE AMS 6940C SAE AMS 6940C (Titanlegierung, Stäbe, Schmiedestücke und Rohmaterial zum Schmieden, 3.0Al - 2.5V, geglüht) | 1 | chevron_right |
| SAE AMS 6945D SAE AMS 6945D (Titanlegierung, Einfach geschmolzen, Blech, Band und Grobblech 6Al - 4V Geglüht) | 1 | chevron_right |
| SAE AMS 6946E SAE AMS 6946E (Titanlegierung, Blech, Band und Grobblech 4Al - 2.5V - 1.5Fe Geglüht) | 1 | chevron_right |
| SAE AMS 6947C SAE AMS 6947C (Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes, 4Al - 2.5V -1.5 Fe, Annealed, Heat Treatable) | 1 | chevron_right |
| SAE AMS 6948C SAE AMS 6948C (Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes, 4Al - 2.5V -1.5 Fe, Annealed) | 1 | chevron_right |
| SAE AMS 6949B SAE AMS 6949B (Titanlegierung, Bleche und Streifen 4Al - 2,5V - 1.5Fe Elektronenstrahl geschmolzen. Geglüht) | 1 | chevron_right |
| SAE AMS 6950A SAE AMS 6950A (Stangen, Schmiedeteile und Schmiedevormaterial aus Titanlegierung 4Al - 2.5V - 1,5 Fe in einem Ofen geschmolzen, geglüht) | 1 | chevron_right |
| SAE AMS 6951B SAE AMS 6951B (Titanlegierung, Blech 5Al-4V-0.75Mo-0.5Fe geglüht) | 1 | chevron_right |
| SAE AMS 6952A SAE AMS 6952A (Titan-Legierung, Schmiedestücke 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si - 0,06 C Lösungsgeglüht und Ausscheidungsgeglüht) | 1 | chevron_right |
| SAE AMS 6953B SAE AMS 6953B (Blech aus Titan-Legierung 6Al – 4Sn – 3Nb – 0.5Mo – 0.3Si, Duplex geglüht) | 1 | chevron_right |
| SAE AMS 7000 SAE AMS 7000 (Durch Laser-Pulverbettfusion (L-PBF) hergestellte Teile, Nickellegierung, korrosions- und hitzebeständig, 62Ni - 21,5Cr - 9,0Mo - 3,65Nb spannungsfrei, heißisostatisch gepresst und lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 7001 SAE AMS 7001 (Nickellegierung, korrosions- und hitzebeständig, Pulver für die additive Fertigung, 62Ni - 21,5Cr - 9,0Mo - 3,65Nb) | 3 | chevron_right |
| SAE AMS 7004A SAE AMS 7004A (Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate Ti-6Al-4V, Stress Relieved) | 1 | chevron_right |
| SAE AMS 7006 SAE AMS 7006 (Nickellegierung, korrosions- und hitzebeständig, Pulver für die additive Fertigung, 52,5 Ni - 19 Cr - 3,0 Mo - 5,1 Cb (Nb) - 0,90 Ti - 0,50 Al - 18 Fe) | 3 | chevron_right |
| SAE AMS 7008 SAE AMS 7008 (Nickellegierung, korrosions- und hitzebeständig, Pulver für die additive Fertigung, 47,5 Ni - 22 Cr - 1,5 Co - 9,0 Mo - 0,60 W - 18,5 Fe) | 3 | chevron_right |
| SAE AMS 7011 SAE AMS 7011 (Elektronenstrahl-Pulverbettfusion (EB-PBF) hergestellte Vorformen und Teile, Titanlegierung, 6Al - 4V, heißisostatisch gepresst) | 1 | chevron_right |
| SAE AMS 7012 SAE AMS 7012 (Ausscheidungshärtbare Stahllegierung, korrosions- und hitzebeständig, Pulver für die additive Fertigung 16.0Cr - 4.0Ni - 4.0Cu - 0.30Nb) | 4 | chevron_right |
| SAE AMS 7013 SAE AMS 7013 (Nickellegierung, korrosions- und hitzebeständig, Pulver für die additive Fertigung, 60Ni - 22Cr - 2,0Mo - 14W - 0,35Al - 0,03La) | 3 | chevron_right |
| SAE AMS 7014 SAE AMS 7014 (Titanlegierung, Hochtemperaturanwendungen, Pulver für die additive Fertigung, Ti - 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo) | 2 | chevron_right |
| SAE AMS 7015 SAE AMS 7015 (Titan-6-Aluminium-4-Vanadium-Pulver für die additive Fertigung) | 3 | chevron_right |
| SAE AMS 7017 SAE AMS 7017 (Titan 6 - Aluminium 4 - Vanadium-Pulver für die additive Fertigung, Extra Low Interstitial (ELI)) | 3 | chevron_right |
| SAE AMS 7018 SAE AMS 7018 (Aluminiumlegierungspulver 10.0Si - 0.35Mg) | 4 | chevron_right |
| SAE AMS 7021 SAE AMS 7021 (Ausscheidungshärtbare Stahllegierung, korrosions- und hitzebeständig, Pulver für die additive Fertigung 15,0Cr - 4,5Ni - 3,5Cu - 0,30Nb) | 3 | chevron_right |
| SAE AMS 7023 SAE AMS 7023 (Gamma-Titan-Aluminid-Pulver für die additive Fertigung Ti - 48Al - 2Nb - 2Cr) | 2 | chevron_right |
| SAE AMS 7026 SAE AMS 7026 (Titan Ti-5553 (Ti - 5Al - 5Mo - 5V - 3Cr) Pulver für die additive Fertigung) | 5 | chevron_right |
| SAE AMS 7028 SAE AMS 7028 (Titanium Alloy, Ti-6Al-4V, Hot Isostatically Pressed (Low Temperature, High Pressure), Produced by Laser Powder Bed Fusion) | 1 | chevron_right |
| SAE AMS 7030 SAE AMS 7030 (Aluminiumlegierung, 10.0Si - 0.35Mg spannungsarm geglüht, heiß isostatisch gepresst (HIP), lösungsgeglüht und warmausgelagert, hergestellt durch Laser-Pulverbett-Fusion (L-PBF)) | 1 | chevron_right |
| SAE AMS 7033 SAE AMS 7033 (Aluminiumlegierungspulver 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg) | 5 | chevron_right |
| SAE AMS 7035 SAE AMS 7035 (Ausscheidungshärtbare Stahllegierung, korrosions- und hitzebeständig, Pulver für Binder Jet Additive Manufacturing, 16.0Cr - 4.0Ni - 4.0Cu - 0.30Nb) | 1 | chevron_right |
| SAE AMS 7055 SAE AMS 7055 (Carburizing Steel Alloy, Powder for Additive Manufacturing 3.5Cr - 7.5Ni - 16.3Co - 1.75Mo - 0.2W - (0.10 - 0.15 C)) | 3 | chevron_right |
| SAE AMS 7075 SAE AMS 7075 (Nickel Alloy, Corrosion- and Heat-Resistant, Powder for Additive Manufacturing, 50Ni - 20Co - 17Cr - 3.1W - 2.3Ti - 2.1Al - 2.1Mo - 1.8Cb(Nb) - 1.5Ta - 0.04C - 0.005B) | 1 | chevron_right |
| SAE AMS 7101 SAE AMS 7101 (Fused Filament Fabrication, Material für) | 1 | chevron_right |
| SAE AMS 7223A SAE AMS 7223A (Nieten - Aluminiumlegierung, 4.5Cu - 1.5Mg - 0.6Mn (2024 - T4)) | 1 | chevron_right |
| SAE AMS 7238B SAE AMS 7238B (Legierung PM Formen, Korrosions-, Verschleiss- und Hitzeresistent 66Co - 30Cr - 8.25W (1.10 - 1.90C)) | 1 | chevron_right |
| SAE AMS 7239B SAE AMS 7239B (Legierung Pm Formen, Korrosions-, Verschleiss- und Hitzeresistent 60co 29cr 4.5w (0.90-1.40c)) | 1 | chevron_right |
| SAE AMS 7240F SAE AMS 7240F (Unterlegscheiben, Schnappschlösser aus kohlenstoffhaltigem Stahl) | 1 | chevron_right |
| SAE AMS 7241C SAE AMS 7241C (Unterlegscheiben, Schnappschlösser aus kohlenstoffhaltigem Stahl 18Cr - 9Ni) | 1 | chevron_right |
| SAE AMS 7259 SAE AMS 7259 (Gummi: Fluorkohlenstoff (FKM) Hochtemperatur-/flüssigkeitsbeständig niedriger Druckverformungsrest/85 bis 95 Härte für Dichtungen in Kraftstoffsystemen und bestimmten Motorölsystemen) | 1 | chevron_right |
| SAE AMS 7270M SAE AMS 7270M (Gummi: Acrylnitril-Butadien (NBR) Kraftstoffbeständig 65 bis 75 Härte Typ A für Dichtungen im Kraftstoff) | 1 | chevron_right |
| SAE AMS 7271 SAE AMS 7271 (Acrylnitril-Butadien-Kautschuk (NBR) Kraftstoff- und kältebeständig 60 - 70 Typ „A“ Härte Für Dichtungen in Kraftstoffsystemen) | 1 | chevron_right |
| SAE AMS 7273 SAE AMS 7273 (Gummi: Hochtemperaturbeständiges Fluorsilikon (FVMQ) gegen Kraftstoff und Öl für Dichtungen in Kraftstoffsystemen und bestimmten Motorölsystemen) | 1 | chevron_right |
| SAE AMS 7287 SAE AMS 7287 (Fluorkautschuk-Elastomer (FKM) Hochtemperatur / HTS ölbeständig / kraftstoffbeständig Niedriger Druckverformungsrest / 70 bis 80 Härte, niedrige Temperatur Tg -22 °F (-30 °C) Für Dichtungen in Öl / Kraftstoff / spezifischen hydraulischen Systemen) | 1 | chevron_right |
| SAE AMS 7289 SAE AMS 7289 (Elastomer: Synthetische, ölbeständige Kompressionsdichtungen aus Nitrilkautschuk (NBR), Härte 65 bis 75, Typ A, für Produkte in Motorölsystemen) | 1 | chevron_right |
| SAE AMS 7301J SAE AMS 7301J (Stahl, hochbeanspruchte Federn 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) einsatzgehärtet) | 2 | chevron_right |
| SAE AMS 7304F SAE AMS 7304F (Federn, Stahl 0.85 - 1.05C gehärtet und angelassen nach Formgebung) | 1 | chevron_right |
| SAE AMS 7310M SAE AMS 7310M (Ringe, Kolben, gegossenes Eisen, Gusszustand) | 1 | chevron_right |
| SAE AMS 7311H SAE AMS 7311H (Kolbenringe, schleudergegossenes, legiertes Eisen 0.50Mo - 0.50Cu) | 1 | chevron_right |
| SAE AMS 7312H SAE AMS 7312H (Kolbenringe, schleudergegossenes Eisen) | 1 | chevron_right |
| SAE AMS 7320H SAE AMS 7320H (Ringe, Dichtungen, gegossene Blei-Zinn-Bronze, 80Cu - 16Sn - 5Pb, Gusszustand) | 1 | chevron_right |
| SAE AMS 7322H SAE AMS 7322H (Rings, Sealing, Cast Tin Bronze 80Cu - 19Sn, As Cast) | 1 | chevron_right |
| SAE AMS 7361 SAE AMS 7361 (Gummi: Ethylen-Propylen (EP), resistent gegen Phosphatester, Niedrigtemperatur-Tg -67 °F (-55 °C), 75 bis 85 Typ M Härte für Dichtungen in Hydrauliksystemen) | 1 | chevron_right |
| SAE AMS 7410 SAE AMS 7410 (Gummi: Fluorkohlenstoff-Elastomer (FKM) Beständig gegen Flugzeugmotorenöl, Kraftstoff und Hydraulikflüssigkeit Härte 70 bis 80 Shore Typ A Tieftemperaturdichtung Tg -47 °F (-43,9 °C) für Elastomerdichtungen in Flugzeugmotoren, Kraftstoff- und Hydrauliksystemen) | 1 | chevron_right |
| SAE AMS 7445E SAE AMS 7445E (Kugeln, Stahl, korrosionsbeständig 17Cr geglüht) | 3 | chevron_right |
| SAE AMS 7490R SAE AMS 7490R (Ringe, abbrennstrumpfgeschweißte, korrosions- und hitzebeständige austenitische Stähle, austenitisches Eisen, Nickel, oder Kobaltlegierungen, oder härtbare Legierungen) | 1 | chevron_right |
| SAE AMS 7493L SAE AMS 7493L (Ringe, abbrennstumpfgeschweißte ferritische und martensitische, korrosionsbeständige Stähle) | 1 | chevron_right |
| SAE AMS 7496K SAE AMS 7496K (Ringe, abbrennstumpfgeschweißter Kohlenstoffstahl und niedriglegierter Stahl) | 1 | chevron_right |
| SAE AMS 7510/1C SAE AMS 7510/1C (Magnete, Seltene Erde/Kobalt, permanent Samarium-Kobalt, 33/67 - 15 (119) 250) | 1 | chevron_right |
| SAE AMS 7510/2C SAE AMS 7510/2C (Magnete, Seltene Erde/Kobalt, permanent Samarium-Kobalt, 33/67 - 18 (143) 250) | 1 | chevron_right |
| SAE AMS 7701F SAE AMS 7701F (Nickel-Eisen-Legierung, Magnetisch, Blech und Band, Geglüht) | 1 | chevron_right |
| SAE AMS 7702F SAE AMS 7702F (Nickel-Eisen-Legierung, Magnetisch, Blech und Band, kalt gewalzt, halbharter Werkstoffzustand) | 1 | chevron_right |
| SAE AMS 7705F SAE AMS 7705F (Magnetische Nickel-Eisen-Legierung, Stangen und Schmiedestücke) | 1 | chevron_right |
| SAE AMS 7706B SAE AMS 7706B (Eisenstäbe, Feinstahl, Band- und Grobstahl, technisch rein warmgewalzt, geglüht) | 1 | chevron_right |
| SAE AMS 7707F SAE AMS 7707F (Eisen, technisch rein, Stäbe, Feinstahl, Bandstahl und Grobstahl, warmgewalzt, ungeglüht) | 1 | chevron_right |
| SAE AMS 7713C SAE AMS 7713C (Eisen, elektrische Anwendungen, Stäbe und Bandstahl, kaltgeformt, geglüht) | 1 | chevron_right |
| SAE AMS 7717F SAE AMS 7717F (Nickel-Eisen-Legierung, Magnetisch, Blech und Band, 50Ni - 50Fe Geglüht, Umformqualität) | 1 | chevron_right |
| SAE AMS 7718J SAE AMS 7718J (Nickel-Eisen-Legierung, Magnetisch, Stangen, Stäbe, Rohre und Schmiedestücke 50Ni - 50Fe) | 1 | chevron_right |
| SAE AMS 7719F SAE AMS 7719F (Nickel-Eisen-Legierung, magnetisch, Feinblech and Bandstahl, 50Ni - 50Fe, Prägequalität, halbhart angelassen) | 1 | chevron_right |
| SAE AMS 7721D SAE AMS 7721D (Bleche und Extrusionen aus Bleilegierung 93Pb - 6.5Sb - 0.50Sn Im Herstellungszustand) | 1 | chevron_right |
| SAE AMS 7724D SAE AMS 7724D (Legierung, Feinblech und Bandstahl, gesintertes Drahtnetz, korrosions- und hitzebeständig 30Fe - 1.5Mn - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb +Ta) - 0.15N porös) | 1 | chevron_right |
| SAE AMS 7725F SAE AMS 7725F (Wolframschwermetalllegierungen, Formteile, gesintert, hohe Dichte) | 8 | chevron_right |
| SAE AMS 7726H SAE AMS 7726H (Eisen-Nickel-Kobalt Legierung, Draht 53Fe - 29Ni - 17Co geringe Ausdehnung, Glasabdichtung, geglüht) | 1 | chevron_right |
| SAE AMS 7727F SAE AMS 7727F (Eisen-Nickel-Kobalt Legierung, Stäbe und Schmiedestücke, 53Fe - 29Ni - 17Co, geringe Ausdehnung, Glasabdichtung) | 1 | chevron_right |
| SAE AMS 7728J SAE AMS 7728J (Eisen-Nickel-Kobalt Legierung, Feinblech, Bandstahl und Grobblech, 53Fe - 29Ni - 17Co geringe Ausdehnung, Glasabdichtung, geglüht) | 1 | chevron_right |
| SAE AMS 7731D SAE AMS 7731D (Golddraht und -band 99.97Au geglüht) | 1 | chevron_right |
| SAE AMS 7732D SAE AMS 7732D (Stahldraht, kupferkaschiert, Stifte 99Fe - 0.32Mn geglüht) | 1 | chevron_right |
| SAE AMS 7733D SAE AMS 7733D (Stahldraht, kupferkaschiert, Stifte 99Fe - 0.45Mn (0.13C max) geglüht) | 1 | chevron_right |
| SAE AMS 7734D SAE AMS 7734D (Nickel-Eisen Legierung, Draht, kupferkaschiert, Stifte 42Ni - 56.5Fe geglüht, Dumet) | 1 | chevron_right |
| SAE AMS 7735E SAE AMS 7735E (Legierungsdraht, Rund 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Lösungsgeglüht) | 1 | chevron_right |
| SAE AMS 7817B SAE AMS 7817B (Bleche, Bänder und Grobbleche aus Molybdänlegierung 0.48Ti - 0.09Zr - 0.02C Lichtbogenguss, spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 7819F SAE AMS 7819F (Stangen aus Molybdänlegierung 0.48Ti - 0.09Zr - 0.02C Lichtbogenguss, spannungsarm geglüht) | 1 | chevron_right |
| SAE AMS 7846A SAE AMS 7846A (Stangen und Stäbe aus Tantallegierung 90Ta - 10W geglüht) | 1 | chevron_right |
| SAE AMS 7847E SAE AMS 7847E (Bleche, Bänder und Grobbleche aus Tantallegierung , 90Ta - 10W) | 1 | chevron_right |
| SAE AMS 7848E SAE AMS 7848E (Stangen und Stäbe aus Tantallegierung 90Ta - 10W) | 1 | chevron_right |
| SAE AMS 7849F SAE AMS 7849F (Bleche, Bänder und Grobbleche aus Tantal, geglüht) | 1 | chevron_right |
| SAE AMS 7850E SAE AMS 7850E (Columbium (Niob) Blech, Band, Grobblech und Folie) | 1 | chevron_right |
| SAE AMS 7851E SAE AMS 7851E (Columbium (Niob) Legierung Folie, Blech, Band und Grobblech, 10W - 2.5Zr rekristallisiert) | 1 | chevron_right |
| SAE AMS 7852C SAE AMS 7852C (Columbium (Niob) Legierung Blech, Band und Grobblech, 10Hf - 1.0Ti) | 1 | chevron_right |
| SAE AMS 7855E SAE AMS 7855E (Stangen, Stäbe und Draht aus einer Niob-Legierung (Columbium) 10 W – 2,5 Zr rekristallisiert) | 1 | chevron_right |
| SAE AMS 7857C SAE AMS 7857C (Columbium (Niob) Legierung Stangen, Stäbe und Extrusionen, 10Hf - 1.0Ti, rekristallisationsgeglüht) | 1 | chevron_right |
| SAE AMS 7875F SAE AMS 7875F (Pulver, Chromkarbid plus Nickel-Chrom-Legierung 75Cr3C2 + 25 (80Ni - 20Cr-Legierung)) | 3 | chevron_right |
| SAE AMS 7879G SAE AMS 7879G (Wolframcarbid-Kobalt-Pulver) | 1 | chevron_right |
| SAE AMS 7880C SAE AMS 7880C (Wolfram-Karbid-Kobalt-Pulver gesintert und crushed) | 1 | chevron_right |
| SAE AMS 7881B SAE AMS 7881B (Wolfram-Karbid-Kobalt-Pulver agglomeriert und gesintert) | 1 | chevron_right |
| SAE AMS 7882C SAE AMS 7882C (Wolfram-Karbid-Kobalt-Chrom-Pulver agglomeriert und gesintert) | 1 | chevron_right |
| SAE AMS 7897C SAE AMS 7897C (Wolframschmiedestücke gepresst, gesintert und geschmiedet) | 1 | chevron_right |
| SAE AMS 7898D SAE AMS 7898D (Wolframblech, Band, Grobblech und Folie gepresst, gesintert und geschmiedet) | 1 | chevron_right |
| SAE AMS 7902H SAE AMS 7902H (Beryllium, Feinblech und Grobblech, 98Be) | 1 | chevron_right |
| SAE AMS 7904F SAE AMS 7904F (Beryllium Bars, Rods, Tubing, and Shapes, High Ductility Grade) | 1 | chevron_right |
| SAE AMS 7905C SAE AMS 7905C (Berylliumstangen, Stäbe, Rohre und Formen optische Qualität) | 1 | chevron_right |
| SAE AMS 7906E SAE AMS 7906E (Beryllium, Stangen, Rundstäbe, Rohre und Formteile, Standardqualität) | 1 | chevron_right |
| SAE AMS 7907E SAE AMS 7907E (Beryllium Bars, Rods, Tubing, and Shapes, Instrument Grade) | 1 | chevron_right |
| SAE AMS 7908F SAE AMS 7908F (Beryllium Near-Net Preforms, Standard Grade, Hot Isostatic Pressed) | 1 | chevron_right |
| SAE AMS 7909D SAE AMS 7909D (Aluminium-Beryllium, endkonturnahe (NNS) Vorform, heißisostatisch gepresst, 38Al - 62Be) | 1 | chevron_right |
| SAE AMS 7910E SAE AMS 7910E (Beryllium Near-Net Preforms, Standard Grade, Cold Isostatic Pressed, Sintered) | 1 | chevron_right |
| SAE AMS 7911E SAE AMS 7911E (Aluminium-Beryllium, Vorform, heißisostatisch gepresst, wärmebehandelt, 38Al - 62Be) | 1 | chevron_right |
| SAE AMS 7912E SAE AMS 7912E (Aluminium-Beryllium-Legierung, Extrusionen, 38Al - 62Be, geglüht) | 1 | chevron_right |
| SAE AMS 7913E SAE AMS 7913E (Aluminum-Beryllium Alloy, Sheet and Plate, 38Al - 62Be) | 1 | chevron_right |
| SAE AMS 7918B SAE AMS 7918B (Beryllium-Aluminium-Legierung Feinguss 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge Gusszustand) | 1 | chevron_right |
| SAE AMS A 21180C SAE AMS A 21180C (Guss aus Aluminiumlegierungen, hochfest) | 6 | chevron_right |
| SAE AMS A 22771D SAE AMS A 22771D (Schmiedestücke aus Aluminiumlegierungen, wärmebehandelt) | 9 | chevron_right |
| SAE AMS A 81596A SAE AMS A 81596A (Aluminiumfolie für Sandwichbauweise) | 4 | chevron_right |
| SAE AMS B 20148C SAE AMS B 20148C (Lötblech, Aluminiumlegierung) | 6 | chevron_right |
| SAE AMS H 6875B SAE AMS H 6875B (Wärmebehandelte Rohstähle) | 100 | chevron_right |
| SAE AMS H 81200D SAE AMS H 81200D (Wärmebehandlung von Titan und Titanlegierungen) | 21 | chevron_right |
| SAE AMS P 5510 SAE AMS P 5510 (O-Ring, vorgeformt, Geradgewinderohrverschraubung, Typ I Hydraulik (-54 bis 71 °C)) | 1 | chevron_right |
| SAE AMS QQ A 200 10A SAE AMS QQ A 200 10A (Aluminiumlegierung 3003, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 13C SAE AMS QQ A 200 13C (Aluminiumlegierung 7178, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 14B SAE AMS QQ A 200 14B (Aluminiumlegierung, Stange, Stab, Formen und Draht, Extrudiert, 7178-T76 verbesserter Exfoliationsbeswiderstand) | 1 | chevron_right |
| SAE AMS QQ A 200 15B SAE AMS QQ A 200 15B (Aluminiumlegierung, Stange, Stabund Formen, Extrudiert, 7075-T76 verbesserter Exfoliationswiderstand) | 1 | chevron_right |
| SAE AMS QQ A 200 16A SAE AMS QQ A 200 16A (Aluminiumlegierung, Strukturformteile, Extrudiert, 6061) | 1 | chevron_right |
| SAE AMS QQ A 200 17A SAE AMS QQ A 200 17A (Aluminiumlegierung 6162, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 1A SAE AMS QQ A 200 1A (Aluminiumlegierung 3003, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 2B SAE AMS QQ A 200 2B (Aluminiumlegierung 2014, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 5B SAE AMS QQ A 200 5B (Aluminiumlegierung 5086, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 6C SAE AMS QQ A 200 6C (Aluminiumlegierung 5454, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 7C SAE AMS QQ A 200 7C (Aluminiumlegierung 5456, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200 8A SAE AMS QQ A 200 8A (Aluminiumlegierung 6061, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert A96061) | 1 | chevron_right |
| SAE AMS QQ A 200 9A SAE AMS QQ A 200 9A (Aluminiumlegierung 6063, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200/11A SAE AMS QQ A 200/11A (Aluminiumlegierung 7075, Stäbe, Rundstangen, Formteile, Rohre und Draht, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200/3A SAE AMS QQ A 200/3A (Aluminiumlegierung 2024, Stäbe, Rundstangen, Formteile, Rohre und Draht, extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 200/4C SAE AMS QQ A 200/4C (Aluminiumlegierung 5083, Stangen, Stäbe, Formen, Rohre und Drähte, Extrudiert) | 1 | chevron_right |
| SAE AMS QQ A 225 1B SAE AMS QQ A 225 1B (Stangen, Stäbe und Draht aus Aluminiumlegierung, gewalzt, gezogen oder kaltfertiggestellt, 1100) | 1 | chevron_right |
| SAE AMS QQ A 225 2A SAE AMS QQ A 225 2A (Stangen, Stäbe und Draht aus Aluminiumlegierung, gewalzt, gezogen oder kaltfertiggestellt, 3003) | 1 | chevron_right |
| SAE AMS QQ A 225 3A SAE AMS QQ A 225 3A (Stangen, Stäbe und Draht aus Aluminiumlegierung, gewalzt, gezogen oder kaltfertiggestellt, 2011) | 1 | chevron_right |
| SAE AMS QQ A 225 4A SAE AMS QQ A 225 4A (Aluminiumlegierung, 2014, Stäbe, Rundstangen und spezielle Formteile, gewalzt, gezogen oder kaltgeformt) | 1 | chevron_right |
| SAE AMS QQ A 225 5A SAE AMS QQ A 225 5A (Aluminiumlegierung, 2017, Stäbe, Rundstangen und Draht, gewalzt, gezogen oder kaltgeformt) | 1 | chevron_right |
| SAE AMS QQ A 225 6B SAE AMS QQ A 225 6B (Stangen, Stäbe und Draht aus Aluminiumlegierung, 2024, gewalzt, gezogen oder kaltfertiggestellt) | 1 | chevron_right |
| SAE AMS QQ A 225 7A SAE AMS QQ A 225 7A (Stangen, Stäbe und Draht aus Aluminiumlegierung, gewalzt, gezogen oder kaltfertiggestellt, 5052) | 1 | chevron_right |
| SAE AMS QQ A 225/10A SAE AMS QQ A 225/10A (Stangen, Stäbe und Draht aus Aluminiumlegierung, gewalzt, gezogen oder kaltfertiggestellt, 6262) | 1 | chevron_right |
| SAE AMS QQ A 225/8B SAE AMS QQ A 225/8B (Stangen, Stäbe, Draht und spezielle Formen aus Aluminiumlegierung, 6061, gewalzt, gezogen oder kaltfertiggestellt) | 1 | chevron_right |
| SAE AMS QQ A 225/9A SAE AMS QQ A 225/9A (Aluminiumlegierung 7075, Stäbe, Rundstangen und spezielle Formteile, gewalzt, gezogen oder kaltgeformt) | 1 | chevron_right |
| SAE AMS QQ A 250 11A SAE AMS QQ A 250 11A (Aluminiumlegierung 6061 - Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 14B SAE AMS QQ A 250 14B (Aluminiumlegierung 7178 - Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 15C SAE AMS QQ A 250 15C (Aluminiumlegierung Alclad 7178 - Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 18B SAE AMS QQ A 250 18B (Aluminium 7075, Grobblech und Blech, Alclad auf einer Seite) | 1 | chevron_right |
| SAE AMS QQ A 250 19A SAE AMS QQ A 250 19A (Aluminiumlegierung 5086, Grobblech und Blech für Meerwasseranwendung) | 1 | chevron_right |
| SAE AMS QQ A 250 1A SAE AMS QQ A 250 1A (Aluminium 1100, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 20A SAE AMS QQ A 250 20A (Aluminiumlegierung 5456 - Grobblech und Blech für Meerwasseranwendung) | 1 | chevron_right |
| SAE AMS QQ A 250 21C SAE AMS QQ A 250 21C (Aluminiumlegierung, 7178-T76, Grobblech und Blech, verbesserte Exfoliationsresistenz) | 1 | chevron_right |
| SAE AMS QQ A 250 22C SAE AMS QQ A 250 22C (Aluminiumlegierung, 7178-T76, alcladbeschichtetes Grob- und Feinblech, erhöhte Ablätterungsbeständigkeit) | 1 | chevron_right |
| SAE AMS QQ A 250 24C SAE AMS QQ A 250 24C (Aluminiumlegierung, 7075, Grobblech und Blech, verbesserte Exfoliationsresistenz) | 1 | chevron_right |
| SAE AMS QQ A 250 25B SAE AMS QQ A 250 25B (Aluminiumlegierung, Alclad 7075, Grobblech und Blech, verbesserte Exfoliationsresistenz) | 1 | chevron_right |
| SAE AMS QQ A 250 26B SAE AMS QQ A 250 26B (Aluminiumlegierung, 7011 Alclad, 7075 - Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 28C SAE AMS QQ A 250 28C (Aluminiumlegierung, 7011 Alclad, 7178 - Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 2A SAE AMS QQ A 250 2A (Aluminiumlegierung 3003, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 3A SAE AMS QQ A 250 3A (Aluminiumlegierung, alcladbeschichtet, 2014, Grob- und Feinblech) | 1 | chevron_right |
| SAE AMS QQ A 250 4B SAE AMS QQ A 250 4B (Aluminiumlegierung 2024, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 5C SAE AMS QQ A 250 5C (Aluminiumlegierung Alclad 2024, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 6B SAE AMS QQ A 250 6B (Aluminiumlegierung 5083, Grob- und Feinblech) | 1 | chevron_right |
| SAE AMS QQ A 250 7A SAE AMS QQ A 250 7A (Aluminiumlegierung 5086, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250 9B SAE AMS QQ A 250 9B (Aluminiumlegierung 5456, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250/10C SAE AMS QQ A 250/10C (Aluminiumlegierung 5454, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250/12A SAE AMS QQ A 250/12A (Aluminiumlegierung 7075, Grob- und Feinblech) | 1 | chevron_right |
| SAE AMS QQ A 250/13B SAE AMS QQ A 250/13B (Aluminiumlegierung Alclad 7075 - Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 250/29A SAE AMS QQ A 250/29A (Aluminiumlegierung 2124, Grobblech) | 1 | chevron_right |
| SAE AMS QQ A 250/30A SAE AMS QQ A 250/30A (Aluminiumlegierung 2219, Grob- und Feinblech) | 1 | chevron_right |
| SAE AMS QQ A 250/8C SAE AMS QQ A 250/8C (Aluminiumlegierung 5052, Grobblech und Blech) | 1 | chevron_right |
| SAE AMS QQ A 367E SAE AMS QQ A 367E (Schmiedestücke aus Alminiumlegierung) | 15 | chevron_right |
| SAE AMS QQ A 591B SAE AMS QQ A 591B (Guss aus Aluminiumlegierungen, Handguss) | 10 | chevron_right |
| SAE AMS T 7081A SAE AMS T 7081A (Rohr, Aluminiumlegierung, nahtlos, rund, gezogen, 6061, Aircraft Hydraulic Quality) | 1 | chevron_right |
| SAE AMS T 81556A SAE AMS T 81556A (Titan und Titanlegierungen, extrudierte Stäbe und Formteile, Flugzeugqualität) | 18 | chevron_right |
| SAE AMS T 81915B SAE AMS T 81915B (Titan und Titan-Legierung, Guss, Investment-Feinguss) | 4 | chevron_right |
| SAE AMS T 9046B SAE AMS T 9046B (Titan und Titanlegierungen, Feinblech, Bandstahl und Grobblech) | 32 | chevron_right |
| SAE AMS T 9047A SAE AMS T 9047A (Titan und Titanlegierungen, Stäbe (gewalzt oder geschmiedet) und Rohmaterial zum Schmieden, Flugzeugqualität) | 16 | chevron_right |
| SAE AMS WW T 700/1A SAE AMS WW T 700/1A (Rohr, Aluminium, gezogen, nahtlos, 1100) | 1 | chevron_right |
| SAE AMS WW T 700/2A SAE AMS WW T 700/2A (Rohr, Aluminium, Legierung, gezogen, nahtlos, 3003) | 1 | chevron_right |
| SAE AMS WW T 700/3B SAE AMS WW T 700/3B (Rohr, Aluminiumlegierung, Gezogen, Nahtlos, 2024) | 1 | chevron_right |
| SAE AMS WW T 700/4B SAE AMS WW T 700/4B (Rohr, Aluminiumlegierung, Gezogen, Nahtlos, 5052) | 1 | chevron_right |
| SAE AMS WW T 700/5B SAE AMS WW T 700/5B (Rohr, Aluminium, Legierung, gezogen, nahtlos, 5086) | 1 | chevron_right |
| SAE AMS WW T 700/6C SAE AMS WW T 700/6C (Rohr, Aluminium, Legierung, gezogen, nahtlos, 6061) | 1 | chevron_right |
| SAE AMS WW T 700/7B SAE AMS WW T 700/7B (Rohr, Aluminium, Legierung, gezogen, nahtlos, 7075) | 1 | chevron_right |
| SAE AMS-A-25463 SAE AMS-A-25463 (Adhäsive, filmbildende, metallische Struktur- Sandwichbauart) | 32 | chevron_right |
| SAE AMS-C-7438A SAE AMS-C-7438A (Kernmaterial, Aluminium, für Sandwichkonstruktionen) | 80 | chevron_right |
| SAE AMS-C-8073 SAE AMS-C-8073 (Kernmaterial, Plastikwaben, Laminiertes Glasgewebe als Basis, Für Luftfahrzeugstruktur- und elektronische Anwendungen) | 11 | chevron_right |
| SAE AMS-C-81986 SAE AMS-C-81986 (Kern, Kunststoff Waben, Nylon-Papier-Basis) | 11 | chevron_right |
| SAE AMS-C-9084 SAE AMS-C-9084 (Gewebe, Glas, Finished für Kunstharzlaminate) | 24 | chevron_right |
| SAE AMS-I-23011C SAE AMS-I-23011C (Eisen-Nickellegierung, Abdichtung bei Glas und Keramiken) | 12 | chevron_right |
| SAE AMS-I-7068C SAE AMS-I-7068C (Barren, Zinklegierung ( Für Blech Metalumformmatrizen)) | 2 | chevron_right |
| SAE AMS-L-18331B SAE AMS-L-18331B (Blockbleilegierung) | 1 | chevron_right |
| SAE AMS-P-5315 SAE AMS-P-5315 (Gummi: Acrylnitril-Butadien (NBR) Kraftstoffbeständig 60 - 70 Typ A Härte) | 1 | chevron_right |
| SAE AMS-P-83310A SAE AMS-P-83310A (Plastikblech, Polykarbonat, Transparent) | 1 | chevron_right |
| SAE AMS-QQ-P-416G SAE AMS-QQ-P-416G (Plattierung, Kadmium (galvanisch abgeschieden)) | 7 | chevron_right |
| SAE AMS-QQ-S-763D SAE AMS-QQ-S-763D (Stahl, korrosionsresistent, Stangen, Draht, Form und Schmiedestücke) | 70 | chevron_right |
| SAE AMS-QQ-W 428-1B SAE AMS-QQ-W 428-1B (Draht, Stahl, hoher Kohlenstoffgehalt, rund, Typ I) | 1 | chevron_right |
| SAE AMS-QQ-W 428-2B SAE AMS-QQ-W 428-2B (Draht, Stahl, hoher Kohlenstoffgehalt, rund, Type III) | 1 | chevron_right |
| SAE AMS-QQ-W 428A SAE AMS-QQ-W 428A (Draht, kohlenstoffhaltiger Stahl (hoher Kohlenstoffgehalt, rund, für mechanische Federn, universal)) | 7 | chevron_right |
| SAE AMS-R-25988 SAE AMS-R-25988 (Gummi, Fluorsilikon-Elastomer, öl- und benzinbeständig, Platten, Streifen, Formteile und extrudierte Formen) | 11 | chevron_right |
| SAE AMS-S-11310B SAE AMS-S-11310B (Stahlstäbe, Kohlenstoff, warmgewalzt, für Kaltverformungen, einschließlich Kaltfließpressen) | 12 | chevron_right |
| SAE AMS-S-18728B SAE AMS-S-18728B (Stahlblech, Feinblech und Bandstahl, Legierung 8630, Aircraft Quality) | 1 | chevron_right |
| SAE AMS-S-18729A SAE AMS-S-18729A (Stahlplatte, Feinblech und Bandstahl, Legierung 4130, Aircraft Quality) | 2 | chevron_right |
| SAE AMS-S-18732B SAE AMS-S-18732B (Stahlstäbe, Draht, Rohmaterial zum Schmieden, Schmiedestücke, Rohre (431), speziell) | 2 | chevron_right |
| SAE AMS-S-22141A SAE AMS-S-22141A (Stahl, verlorene Gussform, Legierung und Kohlenstoffstahl) | 16 | chevron_right |
| SAE AMS-S-5000A SAE AMS-S-5000A (Stahl, Chrom-Nickel-Molybdän (E4340) Stäbe und Rohmaterial zum Schmieden) | 1 | chevron_right |
| SAE AMS-S-5626A SAE AMS-S-5626A (Stahl: Chrom-Molybdän (4140) Stäbe, Rundstäbe und Rohmaterial zum Schmieden (zur Verwendung in der Luftfahrt)) | 2 | chevron_right |
| SAE AMS-S-6049B SAE AMS-S-6049B (Stahl, Chrom-Nickel-Molybdän (8740) Stäbe und Rohmaterial zum Schmieden (Aircraft Quality)) | 2 | chevron_right |
| SAE AMS-S-6050B SAE AMS-S-6050B (Stahl, Chrome-Nickel-Molybdän (8630) Stäbe Rohmaterial zum Schmieden (Aircraft Quality)) | 1 | chevron_right |
| SAE AMS-S-6098A SAE AMS-S-6098A (Stahl, Chrom-Nickel-Molybdän (8735) Stäbe und Rohmaterial zum Schmieden (Aircraft Quality)) | 2 | chevron_right |
| SAE AMS-S-6709A SAE AMS-S-6709A (Stahl, Chrom-Molybdän-Aluminium, Stäbe, Rundstäbe, Barren und Rohmaterial zum Schmieden (zum Nitrierhärten) (Aircraft Quality)) | 1 | chevron_right |
| SAE AMS-S-6758B SAE AMS-S-6758B (Stahl, Chrom-Molybdän (4130) Stäbe und Rohmaterial für Schmiedestücke (Aircraft Quality)) | 2 | chevron_right |
| SAE AMS-S-7108B SAE AMS-S-7108B (Stahl, Legierung (Mangan-Silikon-Nickel), Stäbe und Rohmaterial zum Schmieden (Aircraft Quality)) | 1 | chevron_right |
| SAE AMS-S-7420B SAE AMS-S-7420B (Stahlstäbe, Legierung, Chrom, hoher Kohlenstoffgehalt E52100 (Aircraft Quality)) | 2 | chevron_right |
| SAE AMS-S-7720B SAE AMS-S-7720B (Stahl, korrosionsbeständig (18-8) Stäbe, Draht und Rohmaterial für Schmiedeteile (Aircraft Quality)) | 4 | chevron_right |
| SAE AMS-S-7947B SAE AMS-S-7947B (Stahl, Feinblech und Bandstahl (1095) (Aircraft Quality)) | 2 | chevron_right |
| SAE AMS-S-7952A SAE AMS-S-7952A (Stahl, Feinblech und Bandstahl, unbeschichtet, kohlenstoffhaltig (1020 und 1025) (Aircraft Quality)) | 4 | chevron_right |
| SAE AMS-S-8503A SAE AMS-S-8503A (Stahlstäbe, Chrom-Vanadium (6150), Aircraft Quality) | 1 | chevron_right |
| SAE AMS-S-8559B SAE AMS-S-8559B (Stahlstäbe, Kohlenstoff, AISI (1095), Aircraft Quality) | 1 | chevron_right |
| SAE AMS-S-8690A SAE AMS-S-8690A (Stahl, Chrom-Nickel-Molybdän, 8620, Stäbe, Aircraft Quality) | 1 | chevron_right |
| SAE AMS-S-8840A SAE AMS-S-8840A (Stahl, Feinblech und Bandblech, korrosionsbeständig, Ausscheidungshärten (AM350 und AM355), AM350 Premiumqualitäts-Zusammensetzung, geglüht, Zusammensetzungen AM355, CRT 150/180/120) | 2 | chevron_right |
| SAE AMS-S-8949B SAE AMS-S-8949B (Stahlstäbe, Grobblech, Feinblech, Barren und Rohmaterial zum Schmieden, Typ D6AC) | 1 | chevron_right |
| SAE AMS-T-21014A SAE AMS-T-21014A (Wolframbasiertes Metall, hohe Dichte) | 4 | chevron_right |
| SAE AMS-T-5066B SAE AMS-T-5066B (Rohre, kohlenstoffhaltiger Stahl (1025) (Aircraft Quality)) | 2 | chevron_right |
| SAE AMS-T-6735B SAE AMS-T-6735B (Rohre, Chrom-Molybdän, 4135 Stahl, nahtlos, Aircraft Quality) | 2 | chevron_right |
| SAE AMS-T-6736B SAE AMS-T-6736B (Rohre, Chrom-Molybdän (4130 oder 8630) Stahl, nahtlos und geschweißt) | 3 | chevron_right |
| SAE AMS-T-6845B SAE AMS-T-6845B (Rohre, Stahl, korrosionsbeständig (S30400), hydraulisches System für Luft- und Raumfahrtfahrzeuge, 1/8 harter Zustand) | 2 | chevron_right |
| SAE AMS-T-8506B SAE AMS-T-8506B (Rohre, Stahl, korrosionsbeständig, (304), geglüht, nahtlos und geschweißt) | 2 | chevron_right |
| SAE AMS-W-21425B SAE AMS-W-21425B (Draht, Stahl, hoher Kohlenstoffgehalt, eckig, unbeschichtet, für mechanische Federn (universal)) | 3 | chevron_right |
| SAE J 1081 SAE J 1081 (Potentielle Standartstähle) | 28 | chevron_right |
| SAE J 113 SAE J 113 (Hartgezogener mechanischer Federdraht und Federn) | 4 | chevron_right |
| SAE J 1149 SAE J 1149 (Rohr aus Metall für Luftbremssystem) | 2 | chevron_right |
| SAE J 1199 SAE J 1199 (Genügt mechanischen- und Materialanforderungen für metrische, stählerne Verbindungselemente mit Außengewinde) | 6 | chevron_right |
| SAE J 1236 SAE J 1236 (Gusseisen-Dichtringe (Metrisch)) | 1 | chevron_right |
| SAE J 1237 SAE J 1237 (Metrische, selbstfurchende Schrauben) | 3 | chevron_right |
| SAE J 1249 SAE J 1249 (Früherer SAE Standard and früherer SAE Ex-stahl) | 406 | chevron_right |
| SAE J 1268 SAE J 1268 (Härtbare Bänder für Kohlenstoff- und Legierungs-H-stähle) | 189 | chevron_right |
| SAE J 132 SAE J 132 (Ölgehärteter Chrom-Vanadiumstahl, Ventilfederqualität, Draht und Federn) | 1 | chevron_right |
| SAE J 1392 SAE J 1392 (Stahl, hohe Festigkeit, warmgewalzt, Feinblech und Bandstahl, kaltgewalzt, Feinblech, beschichtetes Feinblech) | 396 | chevron_right |
| SAE J 1442 SAE J 1442 (Hochfeste, warmgewalzte Stahlstäbe) | 19 | chevron_right |
| SAE J 157 SAE J 157 (Ölgehärteter Chrom-Silikonlegierungsstahl, Draht und Federn) | 1 | chevron_right |
| SAE J 1650 SAE J 1650 (Nahtlose Kupfernickelrohre 90-10) | 1 | chevron_right |
| SAE J 1682 SAE J 1682 (Informationsbericht über die Ventilführung) | 13 | chevron_right |
| SAE J 1692 SAE J 1692 (Bericht zur Information über Ventilsitz-Einsätze) | 59 | chevron_right |
| SAE J 172 SAE J 172 (Hartgezogenes Ventil aus Kohlenstoffstahl, Federqualität, Drähte und Federn) | 1 | chevron_right |
| SAE J 178 SAE J 178 (Stahl für Saitendraht und Federn) | 1 | chevron_right |
| SAE J 1868 SAE J 1868 (Bänder mit beschränkter Härte für ausgewählte Legierungsstähle) | 23 | chevron_right |
| SAE J 1887 SAE J 1887 (Verdichteter Graphit - Eisenguss für Fahrzeuge) | 7 | chevron_right |
| SAE J 1958 SAE J 1958 (Dieselmotoren-Stahlrohre für Hochdruck-Einspritzleitungen (Rohre)) | 3 | chevron_right |
| SAE J 1993 SAE J 1993 (Kohlenstoffreicher Gussstahl-Splitt) | 4 | chevron_right |
| SAE J 217 SAE J 217 (Rostfreier Stahl 17-7 PH Federdraht und Federn) | 1 | chevron_right |
| SAE J 2175 SAE J 2175 (Angaben zu gegossenen Stahlkugeln mit geringem Kohlenstoffgehalt) | 14 | chevron_right |
| SAE J 230 SAE J 230 (Rostfreier Stahl, SAE 30302, Federdraht und Federn) | 1 | chevron_right |
| SAE J 2340 SAE J 2340 (Klassifizierung und Eigenschaften von widerstandsfähigem, hochfestem, und ultrahochfestem Feinblech in Fahrzeugen) | 48 | chevron_right |
| SAE J 2392 SAE J 2392 (Kategorisierung und Eigenschaften von SAE Kaltband-Stählen) | 15 | chevron_right |
| SAE J 2477 SAE J 2477 (Automobil Bainitisch duktiler (Sphäroguss) Eisenguss (ADI)) | 6 | chevron_right |
| SAE J 2485 SAE J 2485 (Befestigungselemente Teilenorm - Gerät Muttern (metrisch und Zoll)) | 10 | chevron_right |
| SAE J 2515 SAE J 2515 (Hochtemperaturbeständige Materialien für Abgasrohre) | 19 | chevron_right |
| SAE J 2613 SAE J 2613 (Geschweißte Blitz gesteuert, hohe Festigkeit (500 MPa Zugfestigkeit) niedriglegierte Stahl Hydraulikschläuche, unterkritisch geglüht zum Biegen und Bördeln) | 1 | chevron_right |
| SAE J 2614 SAE J 2614 (Geschweißt und kaltgezogen, Hohe Festigkeit (500 MPa Zugfestigkeit) niedriglegierte Stahl-Hydraulikschläuche, unterkritisch geglüht zum Biegen und Flackern) | 1 | chevron_right |
| SAE J 271 SAE J 271 (Besondere Qualität, hoch zugfest, hartgezogener, mechanischer Federdraht und Federn) | 1 | chevron_right |
| SAE J 2745 SAE J 2745 (Klassifizierung und Eigenschaften von hochentwickeltem, hochfestem Feinstahl in Fahrzeugen) | 20 | chevron_right |
| SAE J 2832 SAE J 2832 (Geschweißt, hohe Festigkeit (Zugfestigkeit 690 MPa) Hydraulikrohr aus niedriglegiertem Stahl, spannungsarm geglüht zum Biegen und doppelt Aufweiten) | 1 | chevron_right |
| SAE J 300 SAE J 300 (Klassifizierung der Motorölviskosität) | 20 | chevron_right |
| SAE J 306 SAE J 306 (Automotive Driveline Lubricant Viscosity Classification) | 11 | chevron_right |
| SAE J 316 SAE J 316 (Ölgehärterter Kohlenstoffstahl, Federdraht und Federn) | 2 | chevron_right |
| SAE J 351 SAE J 351 (Ölgehärterter Kohlenstoffstahl, Ventilfederqualität, Draht und Federn) | 1 | chevron_right |
| SAE J 356 SAE J 356 (Welded, Flash-Controlled, Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, Beading, Forming, and Brazing) | 2 | chevron_right |
| SAE J 368 SAE J 368 (Hochfeste, gehärtete und angelassene Strukturstähle) | 8 | chevron_right |
| SAE J 404 SAE J 404 (Chemische Zusammensetzung wie SAE Legierungsstähle) | 262 | chevron_right |
| SAE J 405 SAE J 405 (Chemische Zusammensetzung wie SAE, rostfreie, knetlegierte Stähle) | 135 | chevron_right |
| SAE J 410 SAE J 410 (Hohe Festigkeit, niedrig legierter Stahl) | 14 | chevron_right |
| SAE J 412 SAE J 412 (Allgemeine Eigenschaften und Wärmebehandlung wie Stähle) | 183 | chevron_right |
| SAE J 429 SAE J 429 (Genügt mechanischen- und Materialanforderungen für Verbindungselemente mit Außengewinde) | 10 | chevron_right |
| SAE J 430 SAE J 430 (Genügt mechanischen und chemischen Anforderungen für Verbindungselemente ohne Gewinde, Kohlenstoffstahl, Vollnieten - Zollreihe) | 4 | chevron_right |
| SAE J 431 SAE J 431 (Grauguss für Fahrzeuge) | 22 | chevron_right |
| SAE J 437 SAE J 437 (Auswahl und Wärmebehandlung von Werkzeug- und Matrizenstahl) | 57 | chevron_right |
| SAE J 438b SAE J 438b (Werkzeug- und Matrizenstahl) | 57 | chevron_right |
| SAE J 460 SAE J 460 (Chemische Zusammensetzung der SAE Lager- und Buchsenlegierungen) | 17 | chevron_right |
| SAE J 467b SAE J 467b (Special Purpose Alloys (ʺSuperalloysʺ)) | 174 | chevron_right |
| SAE J 468 SAE J 468 (Barren und Druckguss-Kompositionen aus Zinklegierung) | 6 | chevron_right |
| SAE J 469 SAE J 469 (Zink-Druckgusslegierungen) | 2 | chevron_right |
| SAE J 470 SAE J 470 (Geschmiedete Nickel- und nickelbezogene Legierungen.) | 117 | chevron_right |
| SAE J 471 SAE J 471 (Aus Metallpulver gesinterte Teile, eisenhaltig) | 51 | chevron_right |
| SAE J 473a SAE J 473a (Weichlote) | 14 | chevron_right |
| SAE J 526 SAE J 526 (Geschweißtes Stahlrohr mit niedrigem Kohlenstoffgehalt, zum Biegen, Aufflanschen, Bördeln, Umformen und Löten) | 1 | chevron_right |
| SAE J 527 SAE J 527 (Gelötete Doppelwand aus kohlenstoffarmen Stahlrohr) | 1 | chevron_right |
| SAE J 78 SAE J 78 (Stählerne, selbstbohrende Blechschrauben) | 2 | chevron_right |
| SAE J 81 SAE J 81 (Gewindefurchende Schrauben) | 1 | chevron_right |
| SAE J 82 SAE J 82 (Genügt mechanischen- und Qualitätsanforderungen für Maschinenschrauben) | 2 | chevron_right |
| SAE J 827 SAE J 827 (Hoch kohlenstoffhaltiger Gusseisenkies) | 14 | chevron_right |
| SAE J 933 SAE J 933 (Genügt mechanischen- und Qualitätsanforderungen für Blechschrauben) | 11 | chevron_right |
| SAE J 935 SAE J 935 (Hochfester Kohlenstoffstahl und gezogener Legierungsstahl) | 42 | chevron_right |
| SAE J 995 SAE J 995 (Mechanische und Materialanforderungen für Muttern aus Stahl) | 3 | chevron_right |
| SAE J125 SAE J125 (Hochtemperatureigenschaften wie Grauguss) | 9 | chevron_right |
| SAE J1397 SAE J1397 (Mechanische Eigenschaften und Spanbarkeit wie Stahlstäbe angenommen) | 282 | chevron_right |
| SAE J158 SAE J158 (Temperguss für Fahrzeuge) | 6 | chevron_right |
| SAE J1639 SAE J1639 (Klassifizierungssystem für Automotive Polyamid (PA)-Kunststoffe) | 27 | chevron_right |
| SAE J1685 SAE J1685 (Acrylnitril/Butadien/Styrol (ABS) und ABS + Polycarbonatmischungen (ABS + PC) basierte Kunststoffe) | 13 | chevron_right |
| SAE J200 SAE J200 (Klassifizierungssystem für Kautschuke) | 59 | chevron_right |
| SAE J2329 SAE J2329 (Klassifizierung und Eigenschaften von kohlenstoffarmem Feinstahl in Fahrzeugen) | 8 | chevron_right |
| SAE J2435 SAE J2435 (Geschweißt blitzgesteuert, SAE 1021 Rohre aus Kohlenstoffstahl, normiert für Biegen, Bördeln und Sicken) | 1 | chevron_right |
| SAE J2467 SAE J2467 (Geschweißt und kaltgezogen, SAE 1021 Rohre aus Kohlenstoffstahl normiert zum Biegen und Bördeln) | 1 | chevron_right |
| SAE J2582 SAE J2582 (Automobil Sphäroguss für Hochtemperatur-Anwendungen) | 3 | chevron_right |
| SAE J2833 SAE J2833 ((R) Geschweißtes und kaltgezogenes, hochfestes (690 MPa Zugfestigkeit) Hydraulikrohr aus niedriglegiertem Stahl, spannungsfrei geglüht zum Biegen, Aufweiten, Kaltumformen und Löten) | 1 | chevron_right |
| SAE J2947 SAE J2947 (Kategorisierung und Eigenschaften von Stahlblech für Automobil-Kaltumformungsanwendungen) | 59 | chevron_right |
| SAE J3127 SAE J3127 (Geschweißte Edelstahlrohre 304 / 304L) | 2 | chevron_right |
| SAE J3128 SAE J3128 (Geschweißte und kaltgezogene Edelstahlrohre 304 / 304L) | 2 | chevron_right |
| SAE J3129 SAE J3129 (Nahtloses 304 / 304L Edelstahlrohr) | 2 | chevron_right |
| SAE J3135 SAE J3135 (Hochfester Edelstahlschlauch 304 / 304L) | 2 | chevron_right |
| SAE J403 SAE J403 (Chemische Zusammensetzung wie SAE Kohlenstoffstähle) | 392 | chevron_right |
| SAE J434 SAE J434 (leitender Eisenguss (mit Graphiteinschlüssen) für Fahrzeuge) | 13 | chevron_right |
| SAE J435 SAE J435 (Stahlguss für Fahrzeuge) | 23 | chevron_right |
| SAE J452 SAE J452 (Chemische Zusammensetzung, mechanische und physikalische Eigenschaften von SAE-Aluminium-Gusslegierungen) | 88 | chevron_right |
| SAE J454 SAE J454 (Allgemeine Daten zu Aluminiumknetlegierungen) | 49 | chevron_right |
| SAE J461 SAE J461 (Geschmiedete und gegossene Kupferlegierungen) | 225 | chevron_right |
| SAE J462 SAE J462 (Gegossene Kupferlegierungen) | 85 | chevron_right |
| SAE J463 SAE J463 (Schmiedekupfer und Kupferlegierungen) | 61 | chevron_right |
| SAE J465 SAE J465 (Magnesium-Gusslegierungen) | 32 | chevron_right |
| SAE J466 SAE J466 (Magnesiumknetlegierungen) | 18 | chevron_right |
| SAE J524 SAE J524 (Nahtlose Stahlrohre mit niedrigem Kohlenstoffgehalt, geglüht, bieg- und aufweitbar) | 1 | chevron_right |
| SAE J525 SAE J525 (Geschweißte und kaltgezogene Stahlrohre mit geringem Kohlenstoffgehalt, geglüht, bieg- und aufweitbar) | 1 | chevron_right |
| SAE J775 SAE J775 (Informationsbericht über Tellerventil im Motor) | 131 | chevron_right |