AA 2219 Aluminiumlegierungen

Materialgruppe: Nichteisenlegierungen / Aluminiumlegierungen

Land/Norm: Vereinigte Staaten / AA

Richtpreis:

Datenaktualisierungen

Neueste Aktualisierung: 2025-05

Gesamtzahl der Aktualisierungen: 12

Aktualisierungsverlauf

2022-02 2021-07 2021-04 2020-09 2020-07 2020-04 2019-10 2019-04 2017-11 2017-04 2016-02

Dieser Werkstoff verfügt über 3856 Eigenschaften – hier wird nur ein Teil davon angezeigt.

Erhalten Sie Zugriff auf alle Werkstoffeigenschaften, einschließlich detaillierter Werte für verschiedene Temperaturen und Zustände.

AA 2219 Chemische Zusammensetzung

Kriterien

Wert

Einheit

CAS Nummer

Kriterien

Wert

Rest

Einheit

CAS Nummer

7429-90-5

Kriterien

Wert

5.8 – 6.8

Einheit

CAS Nummer

7440-50-8

Kriterien

Wert

≤ 0.30

Einheit

CAS Nummer

7439-89-6

Kriterien

Wert

val1

Einheit

CAS Nummer

7439-95-4

Kriterien

Wert

val1

Einheit

CAS Nummer

7439-96-5

Kriterien

Other each

Wert

val1

Einheit

CAS Nummer

Kriterien

Other total

Wert

val1

Einheit

CAS Nummer

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-21-3

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-32-6

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-62-2

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-66-6

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-67-7

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Suchen Sie nach vollständigen Daten für Werkstoffe?

AA 2219 Physikalische Eigenschaften

Temperatur

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Eigenschaft / Wert

Elastizitätsmodul

66.9 — 79.3 GPa

Alle Details anzeigen

Elektrischer Widerstand

val1 Ω∙mm²/m

Alle Details anzeigen

Dichte

val1 kg/dm³

Alle Details anzeigen

Wärmekapazität

val1 J/(kg∙°C)

Alle Details anzeigen

Wärmeleitfähigkeit

val1 W/(m∙°C)

Alle Details anzeigen

Elektrische Leitfähigkeit

val1 S/m

Alle Details anzeigen

Schmelztemperatur

val1 °C

Alle Details anzeigen

Poissonzahl

val1

Alle Details anzeigen

Wärmeausdehnungskoeffizient (CTE)

val1 10^-6/°C

Alle Details anzeigen

Dieser Werkstoff verfügt über 3856 Eigenschaften – hier wird nur ein Teil davon angezeigt.

Erhalten Sie detaillierte physikalische Werte für verschiedene Temperaturen und Bedingungen.

AA 2219 Wärmebehandlung

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

For flat sheet

Temper T31: Solution heat treated at 535°C, quenched, naturally aged. Cold work subsequent to solution heat treatment is required to attain the specified mechanical properties for this temper.

Temper T37: Solution heat treated at 535°C, quenched, naturally aged. Cold work subsequent to solution heat treatment is required to attain the specified mechanical properties for this temper.

Temper T42: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T81: Solution heat treated at 535°C, quenched, precipitation heat treated at 175°C, for 18 hours. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T87: Solution heat treated at 535°C, quenched, precipitation heat treated at 165°C, for 24 hours. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T62: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 36 hours.

For plate

Temper T37: Solution heat treated at 535°C, quenched, naturally aged. Cold work subsequent to solution heat treatment is required to attain the specified mechanical properties for this temper.

Temper T351: Solution heat treated at 535°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T87: Solution heat treated at 535°C, quenched, precipitation heat treated at 175°C, for 18 hours. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T851: Solution heat treated at 535°C, quenched, precipitation heat treated at 175°C, for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 36 hours.

For rolled or cold finished wire, rod and bar

Temper T4: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T351: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 36 hours.

Temper T851: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded rod, bar, profiles and tube

Temper T31: Solution heat treated at 535°C, quenched, naturally aged. Cold work subsequent to solution heat treatment is required to attain the specified mechanical properties for this temper.

Temper T3510: Solution heat treated at 535°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T3511: Solution heat treated at 535°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T81: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 18 hours. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T8510: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T8511: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 36 hours.

For die forgings and rolled rings

Temper T4: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 26 hours.

For hand forgings

Temper T4: Solution heat treated at 535°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T352: Solution heat treated at 535°C, quenched, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 535°C, quenched, precipitation heat treated at 190°C, for 26 hours.

Temper T852: Solution heat treated at 535°C, quenched, precipitation heat treated at 175°C, for 18 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove effects of solution heat treatment and include cooling at a rate of about 30°C per hour from the annealing temperature to 260°C. The rate of subsequent cooling is unimportant. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 2219 Mechanische Eigenschaften

Temperatur

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Eigenschaft / Wert

Zugfestigkeit

≥ 220 MPa

Alle Details anzeigen

Brinell-Härte (HB)

val1

Alle Details anzeigen

Dehnung, A

val1 %

Alle Details anzeigen

Streckgrenze, Rp0.2

val1 MPa

Alle Details anzeigen

Aufprall-Energie

val1 J

Alle Details anzeigen

Brucheinschnürung

val1 %

Alle Details anzeigen

Rockwell-Härte (HR)

val1

Alle Details anzeigen

Benötigen Sie vollständige mechanische Eigenschaften, um die richtige Wahl zu treffen?

Erhalten Sie vollständige Daten zu Festigkeit, Härte, Ermüdung und mehr.

AA 2219 Internationale Werkstoffäquivalente

Anzeige von 15 von 114 Ergebnissen.

WERKSTOFF

NORM

LAND / HERSTELLER

ÄQUIVALENZKATEGORIE

WERKSTOFF

A92219

NORM

UNS

LAND / HERSTELLER

Vereinigte Staaten

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-2219

NORM

LAND / HERSTELLER

Europäische Union

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

1201

NORM

GOST

LAND / HERSTELLER

Russland

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-Al Cu6Mn

NORM

LAND / HERSTELLER

Europäische Union

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-2219

NORM

AFNOR NF

LAND / HERSTELLER

Frankreich

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-Al Cu6Mn

NORM

AFNOR NF

LAND / HERSTELLER

Frankreich

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-2219

NORM

ASRO

LAND / HERSTELLER

Rumänien

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-Al Cu6Mn

NORM

ASRO

LAND / HERSTELLER

Rumänien

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

EN AW-2219

NORM

BDS

LAND / HERSTELLER

Bulgarien

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 2219 FD

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 2219 FH

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 2219P

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

AlCu6Mn

NORM

ISO

LAND / HERSTELLER

International

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

2219

NORM

ISO

LAND / HERSTELLER

International

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 2219 BD

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

Die Äquivalenzkategorien basieren auf dem Vergleich der chemischen Zusammensetzung und der mechanischen Eigenschaften – prüfen Sie stets die Eignung anhand der für Ihre Anwendung geltenden Spezifikation.

Benötigen Sie die vollständige Liste der 114 internationalen Äquivalente?

Sehen Sie alle 114 äquivalenten Werkstoffgüten mit detaillierter Zuordnung nach Norm, Hersteller und Äquivalenzkategorie.

Optimieren Sie die Materialauswahl für Ihre Anwendung - Demo vereinbaren

Möchten Sie Werkstoffe vergleichen und fundiertere Entscheidungen treffen?

Greifen Sie auf zuverlässige Werkstoffdaten zu, vergleichen Sie Optionen und treffen Sie schneller bessere Entscheidungen.

Mit Total Materia können Sie:

Werkstoffe anhand realer technischer Daten vergleichen

Äquivalente Werkstoffe über verschiedene Normen hinweg finden

Die Leistungsfähigkeit unter Ihren spezifischen Bedingungen bewerten

Die Einhaltung globaler Vorschriften überprüfen

Erfahren Sie, wie dies für Ihre spezifische Anwendung funktioniert

Geführte Tour starten

114Querverweise

24Zusammensetzung
2154Mechanische Eigenschaften
429Physikalische Eigenschaften
1Wärmebehandlung
1Metallographie
-Zerspanbarkeit

414Spannung-Dehnung
-Umformbarkeit
96Ermüdung
22Fraktur
13Schleicher

5Verbindungen
-Beschichtungen
-Abmessungen
-Tribologie

7Korrosion
518Alterung
-Witterungsbeständigkeit
8Bestrahlung

50Gesamtzahl der Lieferanten