PROPRIETARY Solar Tool Steel Aços de ferramenta
Atualizações de dados
Este material conta com 30 propriedades — apenas uma parte está sendo exibida aqui.
Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Solar Tool Steel Composição química
Carpenter Technology Corporation, Product Data Sheets,
Precisa de dados completos de desempenho de materiais?
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Solar Tool Steel Propriedades físicas
Temperatura
Este material conta com 30 propriedades — apenas uma parte está sendo exibida aqui.
Desbloquear valores físicos específicos em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Solar Tool Steel Tratamento Térmico
- Normalizing: Heating to 899°C and cooling in air. Annealing: Heat to 746/774°C and cool very slowly in the furnace at a rate of no more than 11°C per hour until the furnace is black, then cool naturally. This will produce a max. hardness of Brinell 202; Hardening: Heat the salt bath or furnace to 843°C. Without preheating, place the tool right in the hot furnace near the thermocouple and let it heat naturally until it uniformly matches the color of the thermocouple. Soak five minutes per inch of thickness, then quench in brine. All water hardening steels should be quenched in 5% to 10% brine and may be quenched right down to bath temperatures. Small tools under about 12.7mm in diameter can be heated to 871°C in controlled atmosphere furnaces or neutral salt baths and quenched in oil; Stress relieving: Anneal below the 649/677°C and cool slowly. Tempering: At 149°C to produce a hardness of Rockwell C 59/60. Shanks of pneumatic chisels should be tempered at 482°C. After oil quenching from 871°C, tempering at 135/149°C should be used.
PROPRIETARY Solar Tool Steel Propriedades mecânicas
Temperatura
Precisa de propriedades mecânicas completas para fazer a escolha certa?
Acesse dados detalhados de resistência, dureza, fadiga e muito mais.
Registro gratuito requerido • Acesso instantâneo
Otimizar seleção de materiais para sua aplicação - Agende uma demonstração
- -Referências Cruzadas
- 5Composição
- 12Propriedades Mecânicas
- 11Propriedades físicas
- 1Tratamento térmico
- -Metalografia
- -Usinabilidade
- -Tensão-Deformação
- -Conformabilidade
- -Fadiga
- -Fratura
- -Rastejante
- -Junta
- -Revestimentos
- -Dimensões
- -Tribologia
- -Corrosão
- -Envelhecimento
- -Resistência às Intempéries
- -Irradiação
- 1Total de Fornecedores